







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBrick Paver Driveway in Lewisville, TX
A brick paver driveway in Lewisville typically costs between $12 and $22 per square foot installed, and most residential driveways land between $8,500 and $24,000 depending on size, base prep, and pattern. Clay brick pavers are the upgrade that changes how a house reads from the street, and they hold up to North Texas heat far better than poured concrete or asphalt. We install them from excavating the old slab or soil to the last joint of polymeric sand, and we back the work with our 730-Day Done Right Promise. If you’ve been putting off replacing a cracked, sunken, or washed-out driveway, call us at (844) 560-4467 and get a real number in writing.
Groundwork Construction Co. of Lewisville is part of a full-scope construction company that handles the entire property, so the driveway ties into grading, drainage, and the rest of the hardscape rather than getting bid out of context. Our technicians have up to 12 years of experience in paver installation, and they work with the same brand partners we use across every trade. You can see the whole scope on our Driveway & Pavers page.
Key Takeaways
- Brick paver driveways in Lewisville run roughly $12 – $22 per square foot installed, with most jobs between $8,500 and $24,000.
- Clay brick pavers handle Texas heat and freeze-thaw cycles better than concrete, but base prep and drainage decide whether the driveway survives.
- Most residential paver driveways are finished in 2 – 5 days, weather permitting.
- Every Groundwork project is covered by the 730-Day Done Right Promise, and pricing is locked upfront with no surprise additions.
- Calls are answered by a live person 24/7, and every technician arrives background-checked and in uniform.

When You Need Brick Paver Driveway
Lewisville sits on Blackland Prairie clay, and that clay moves. It swells through the wet spring and shrinks in August, which is exactly why so many driveways in Old Town and the older neighborhoods off Main Street start cracking, heaving, and settling within a decade. A paver driveway handles that movement differently than a poured slab because the pavers flex with the base instead of splitting under it. Here are the situations where brick pavers are the right call and not just a cosmetic upgrade.
- Your concrete driveway has cracked and settled. When a slab splits along a seam or drops six inches next to the garage, patching it is a temporary fix. Pavers can be reset over a properly rebuilt base, and any single unit can be pulled and replaced later without tearing out the whole driveway.
- You’re tired of the same gray slab on your street. In newer subdivisions around Castle Hills and parts of west Lewisville, almost every driveway is the same stamped or plain concrete. Brick pavers add color and texture that instantly separates the house, and the value shows up in any appraisal.
- Water is pooling on or near the driveway. Standing water after a storm means the slope or base is wrong. A paver driveway rebuilt with a proper sub-base and channel drainage pushes water away from the foundation. We see this constantly in Lewisville homes built in the ’70s and ’80s where grading has shifted.
- You’re planning a major remodel or addition. If the house is getting repainted, re-landscaped, or an ADU is going in, doing the driveway in the same phase keeps the front elevation looking finished rather than half-done.
- You want a driveway that lasts decades, not a decade. A well-built brick paver driveway regularly outlives two concrete slabs. That lifespan is the reason brick is still the material the nicest homes in North Texas use.
- You’re preparing to sell. Curb appeal sells homes in Lewisville, and the driveway is the first thing a buyer’s tires touch. A clean paver driveway reads as a quality property from the moment someone pulls up.
Our Brick Paver Driveway Process
No two driveways get the same treatment, but the sequence is consistent on every job. Here’s what a Groundwork brick paver install in Lewisville actually looks like from the first walkthrough to the final sweep.
- On-site evaluation and design. We walk the property, measure the driveway footprint, check the existing slope and drainage away from the house, and look at how the driveway connects to sidewalks, landscaping, and the garage apron. You’ll see paver options, patterns (herringbone, running bond, basketweave), and a written price before anyone picks up a shovel.
- Demolition and excavation. If an old slab is there, we break it out and haul it off. Then we excavate to the depth the base needs to be, which in Lewisville clay usually runs 6 to 9 inches depending on soil conditions and traffic load. The whole driveway won’t sit on an inch of sand and call it a day.
- Base prep and compaction. We lay a crushed granite or graded aggregate base in lifts and compact each one, then finish with a bedding layer of concrete sand. This step is invisible when the job is done and it’s the one that decides whether the pavers ever move. If the base is wrong, nothing above it survives.
- Drainage and edge restraint. Channel drains, pop-up emitters, or a slight slope directs water away from the garage and foundation. Aluminum edge restraints lock the pavers so the field can’t spread, and they’re set into concrete along the perimeter.
- Paver installation. Pavers are set in the agreed pattern with consistent joints, cut cleanly at borders, corners, and the garage apron. The team checks line, level, and joint width continuously. Most residential driveways are finished in 2 – 5 days depending on size and weather.
- Polymeric sand, cleanup, and walkthrough. We sweep polymeric sand into the joints, activate it with water, and it locks the field together. Then we clean up and do a final walkthrough with you, covering care, sealing (if you opted for it), and what’s covered under the 730-Day Done Right Promise.
Built to last, backed in writing. Your brick paver driveway in Lewisville is covered for 730 days against workmanship issues, and that coverage is stated plainly in the contract, not buried in fine print.

Brick Paver Driveway Pricing in Lewisville
Brick paver driveways in Lewisville run $12 – $22 per square foot installed. A typical 400 – 500 square foot, two-car driveway usually lands between $8,500 and $16,000, while a larger 800 – 1,000 square foot turnaround driveway or one with heavy base work runs $14,000 to $24,000 or more. Those ranges are honest for this market, and our upfront pricing means the number on the written estimate is the number you pay.
| Line item | Typical Lewisville range |
|---|---|
| Standard brick paver install (per sq ft) | $12 – $18 |
| Premium clay brick or imported pavers (per sq ft) | $16 – $22 |
| Old concrete or asphalt removal | $500 – $2,000 |
| Base excavation and haul-off | $400 – $1,500 |
| Drainage additions (channel drain, emitter) | $600 – $2,500 |
| Sealing (optional, per sq ft) | $1 – $3 |
What affects the cost
- Size of the driveway. This is the biggest driver. Every extra 100 square feet adds roughly $1,200 – $2,200.
- What has to come out first. A poured concrete slab takes more demo and disposal than a dirt lot. Asphalt is easier. Old pavers over a decent base can sometimes be reset, and we’ll tell you honestly when that’s an option.
- Base condition and access. Clay that needs over-excavation in a Lewisville yard with poor drainage costs more to prepare than stable soil. Tight side yards where equipment can’t reach the site also add labor.
- Paver material. Standard concrete pavers that look like brick sit at the low end. Real clay brick, which is what most homeowners picture when they say “brick paver driveway,” runs higher and performs differently in heat.
- Pattern complexity. A running bond is straightforward. A herringbone or circular fan pattern takes more cutting and more time, and the cut waste adds up.
- Drainage requirements. A driveway that pitches toward the house needs real drainage correction, and that’s money well spent. Getting water into your foundation slab costs far more later.
Upfront pricing, no surprises. Our written estimate covers everything: materials, labor, removal of the old surface, and disposal. If something unexpected turns up under the old driveway, you hear it from us before anything changes. We also offer $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. The financing is what makes a driveway upgrade possible without draining savings or waiting three years.
FAQs – Brick Paver Driveway
How much does a brick paver driveway cost in Lewisville?
A brick paver driveway in Lewisville costs $12 – $22 per square foot installed, and most residential driveways run $8,500 to $24,000 depending on size, base prep, and paver choice. Old concrete removal, drainage corrections, and premium clay brick push the number up; a straightforward install on easy ground sits at the low end. Call (844) 560-4467 for a free estimate with a locked-in price.
How long does a brick paver driveway last in Texas?
A properly built brick paver driveway in North Texas typically lasts 30 to 50 years or more, compared to 20 to 30 for concrete that hasn’t cracked from clay movement. The pavers themselves hold up to sun and freeze-thaw cycles; the base does the real work. We compact the base in lifts and add edge restraint and drainage, which is what keeps the surface flat over decades. If you want the full lifespan picture, our home construction team can walk you through it.
Is brick paver better than concrete for a driveway in Lewisville?
For most Lewisville properties with expansive clay soil, brick pavers are better because they flex with the ground instead of cracking, and individual units can be lifted and reset if they ever shift. Concrete is cheaper upfront and less maintenance, but a crack or settled panel means pouring a new section or living with it. Brick pavers cost more at installation and last longer, which usually wins over a 20-year horizon.
Can I drive on a brick paver driveway right after installation?
Yes, you can drive on the driveway as soon as the polymeric sand has been activated and typically set a day or so after installation, though we usually ask homeowners to keep heavy vehicles off for the first 24 – 48 hours to let the sand fully cure. Normal light traffic is fine the same day for foot access. We tell you the exact timing at the final walkthrough so there’s no guessing.
Ask us anything else at (844) 560-4467.
Do you handle the old driveway removal and disposal?
Yes. Old concrete, asphalt, or worn pavers are broken out, hauled away, and disposed of as part of the quoted price. You don’t need to arrange a dumpster or a separate contractor. We handle the full removal and the new install in one scope under one contract, so the driveway is finished start to finish without another crew showing up halfway through.
Get a Brick Paver Driveway Quote in Lewisville
Groundwork Construction Co. of Lewisville has been in business since 2014 and offers the 730-Day Done Right Promise on every paver driveway we install, along with upfront pricing and 0% financing for 18 months. Calls are answered by a live person 24/7, technicians show up background-checked and in uniform, and a free project estimate and design consult comes with no obligation. If you’re comparing brick paver driveway installers in Lewisville, call (844) 560-4467 today and get a real number in writing before anyone touches your driveway.
Written by the team at Groundwork Construction Co. of Lewisville, serving Lewisville.


