







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum vs Wrought Iron Fence in Lewisville, TX: Which One Belongs on Your Lot?
Choose aluminum unless your lot sits well away from the Elm Fork floodplain and your home is a 1960s-1980s brick ranch where the heavier look of wrought iron genuinely fits the architecture. Aluminum powder coat ends the rust problem that eats wrought iron from the post base up in Lewisville’s wet clay. Wrought iron’s mass holds better against black gumbo heave, but it costs you maintenance every year. A typical ornamental fence install here runs $3,500-$9,000 depending on length, height, and material. Call (844) 560-4467 for a free estimate and we’ll tell you which one your lot actually wants.

Why the Soil Under Your Fence Matters More Than the Style
The black gumbo clay under most of Lewisville heaves hard in drought-then-flood cycles. That’s the same clay that keeps slab foundations on older homes constantly getting leveled. It also works on fence posts.
Wrought iron’s density gives it a real structural edge here. A solid wrought iron post resists the lateral heave forces of expanding clay better than a hollow aluminum extrusion. Over repeated swell-shrink cycles, hollow aluminum can deform right at the post-base collar, where the rail meets the post and the section takes the most stress. It doesn’t happen on every lot. But if your soil moves as much as the clay around Old Town does, it’s a real failure point.
So wrought iron wins the ground game. Hold that thought, because moisture changes the math.
The Floodplain Moisture Problem Nobody Mentions
Lewisville sits at the confluence of Lewisville Lake and the Elm Fork Trinity River, and much of the newer development pushes into lake-adjacent and floodplain-adjacent corridors. Properties in the AE zones along the Elm Fork see seasonal wet cycles that keep soil moisture elevated around post bases long after the water drops.
Bare or painted wrought iron rusts from the base up in that environment. Not dramatically, and not in one season. But steadily. That means annual inspection of every post base and every weld, spot-treatment where the coating fails, and eventually a decision about repainting the whole run.
Powder-coated aluminum eliminates that cycle entirely. The coating is baked on, it doesn’t rust, and moisture around the base is a non-issue. For a lot near the water, that’s the whole argument.

Ten-Year Maintenance Cost: The Honest Comparison
Here’s where the price conversation usually goes sideways. The bid is only part of what you’ll spend. Numbers below reflect what we see on Lewisville lots.
| Item | Aluminum | Wrought Iron |
|---|---|---|
| Typical install (Lewisville) | $4,000-$10,000 | $3,500-$9,000 |
| Rust treatment over 10 years | None | 1-2 treatments ($300-$700 each) |
| Full repaint | Not needed; touch-up powder coat if chipped | Often required at year 7-10 ($900-$1,800) |
| Routine care | Periodic wash | Annual inspection and spot-treatment |
Over a decade, wrought iron can add $1,200-$3,000 in upkeep on a floodplain-adjacent lot. Aluminum adds close to nothing. On drier ground away from the water, that gap narrows and wrought iron’s structural edge starts to look worth it.
Where Wrought Iron Still Wins in Lewisville
Old Town and the older lakeside core are full of 1960s-1980s brick ranch homes. Wrought iron looks period-appropriate on those lots in a way aluminum’s lighter profile doesn’t match. On that housing stock, it can carry real curb appeal and resale value that a thinner aluminum picket won’t reproduce. Buyers notice the difference even if they can’t name it.
If you’re restoring or updating a home in that segment and your lot is on higher, drier ground, wrought iron is the honest recommendation. We’ll say so.
What to Insist On If You Choose Aluminum
Not all aluminum fence is the same product, and price-only bids usually specify the cheap end. Builder-grade hollow extrusions dent under a thrown ball and fade within two seasons in North Texas sun.
When aluminum is the right call, we specify commercial-grade powder-coated aluminum rated for humid environments. Brands like Bufftech and ActiveYards hold up here; we source from that tier, not the builder-grade bin. The powder coat is what protects the finish through hail season and summer UV. It’s the difference between a fence that looks new at year ten and one you’re already regretting.
Common Local Scenarios
- Lot backs to the Elm Fork greenbelt in an AE zone: aluminum, full stop. The moisture will keep working on wrought iron bases indefinitely.
- 1960s brick ranch in Old Town on higher ground: wrought iron fits the architecture and the soil rewards the extra weight.
- New subdivision in the northern growth zones: aluminum in a commercial-grade powder coat. Newer lots tend to sit on more recently graded, more stable soil.
- HOA-governed community: check the approved materials list before you pick. Both options are commonly approved, but heights and picket styles often aren’t negotiable.
Why Homeowners Call Groundwork Construction Co. of Lewisville
We lay this comparison out on the table because a fence is a 15-to-20-year decision, not a weekend purchase. Our technicians have up to 12 years of experience, and every crew is background-checked and arrives in uniform. Our Fence Installation work is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right. Pricing is upfront, the number you see is the number you pay, and calls are answered by a live person 24/7. Current offers include $1,000 off projects over $10,000 and 0% financing for 18 months.
Fencing is one of seven service lines we run, alongside kitchen remodeling, roofing, windows and doors, driveways and pavers, and home additions, so a single contractor can coordinate the whole exterior. See our Fence Installation in Lewisville page for the full scope of what we build.
FAQs
Aluminum ornamental fencing in Lewisville typically runs $4,000-$10,000, and wrought iron lands around $3,500-$9,000 for a comparable run, with wrought iron’s lower bid offset by higher long-term upkeep. Call (844) 560-4467 for an exact quote; estimates are free.
Yes. Elevated soil moisture around post bases in floodplain-adjacent zones accelerates rust on bare or painted wrought iron, which is why we recommend annual base inspection there. On drier ground, the risk is much lower. Call (844) 560-4467 and we’ll assess your lot’s exposure.
Hollow aluminum can deform at the post-base collar over repeated swell-shrink cycles in black gumbo clay, which is why we specify commercial-grade extrusions with proper post depth rather than builder-grade hollow stock. Set correctly, aluminum holds fine. Call (844) 560-4467 to talk through post depth for your lot.
Repair is usually cheaper when the rust is limited to a few post bases or welds, but once corrosion runs along multiple sections, replacement with fresh powder-coated aluminum often costs less than repeated treatments over the next decade. Call (844) 560-4467 for a free look before you commit to either.
If you’d rather have it looked at, Groundwork Construction Co. of Lewisville offers a no-pressure assessment in Lewisville. We’ll walk the lot, check soil and drainage, and tell you straight which material belongs there. Call (844) 560-4467 to schedule your free estimate.
Written by the team at Groundwork Construction Co. of Lewisville, serving Lewisville, TX.


