







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAsphalt vs Concrete Driveway in Lewisville, TX: The Honest Answer for North Texas Soil and Heat
Choose concrete unless your lot sits on badly moving clay and your budget can’t reach a properly prepped pour – then a fiber-reinforced asphalt drive is the smarter call. That’s the short version for Lewisville, TX. The standard comparison tells you concrete costs more upfront and asphalt needs resealing. What it skips: at 105°F pavement temps, Lewisville asphalt can rut and track, and on the black gumbo clay under most older Lewisville lots, concrete will crack within a decade without a real base under it. Call (844) 560-4467 and we’ll tell you which one your specific driveway can actually survive.

Why Lewisville Is Hard on Both Materials
Lewisville sits where the lake and the Elm Fork Trinity River meet, and the ground reflects it. Expansive clay dominates a lot of the older core – Old Town, the streets near the lake, the 1960s through 1980s brick ranch and pier-and-beam homes where the same slab has been leveled more than once. That clay swells in a wet spring and shrinks hard in a dry August. It doesn’t stay still, and neither does anything poured on top of it if the prep is thin.
Then there’s the heat. Asphalt starts softening around a 120°F surface temperature. A North Texas driveway in full sun regularly hits 150°F+ in July and August. So a thin or cheap asphalt mix doesn’t just look worn – it deforms under tires, especially near the garage apron where cars idle and the sun bakes the same square of pavement all afternoon. Concrete handles the heat without moving. The clay is what makes it crack.
That’s the real trade-off in Lewisville. Neither material is universally better. The prep work underneath is what decides whether either one makes it to ten years, and most bids bury that prep in a vague allowance so you never see what you’re actually buying.
What to Look For: Base Prep Is the Whole Ballgame
Here’s the thing that separates a driveway that lasts from one that’s cracking by year eight: what’s under the slab, not what’s on top of it.
For concrete on clay: you want a minimum 4-inch compacted gravel base, control joints every 8-10 feet, and a mix spec that’s actually stated in writing (PSI, fiber, thickness). Skimpy base and wide-spaced joints are the exact combination that lets clay movement tear a slab apart. Many DFW-area tract home driveways poured in the 1990s and 2000s got 2-3 inch gravel bases. Drive through the older subdivisions in Lewisville and you can see the result – differential cracking, slabs that have stepped apart, joints opening up.
For asphalt: thick enough compacted lift, a solid compacted sub-base, and a heat-resistant sealcoat kept up on schedule. Standard asphalt stays flexible, which honestly tolerates clay movement better than a rigid slab. The catch is heat and rutting, and sealcoat neglect shortens its life fast.
The hybrid some Lewisville builders use: asphalt laid over a fiber-reinforced base layer, finished with a heat-resistant sealcoat. You get the flexibility that clay likes without the cracking risk of a monolithic concrete slab in full sun. It’s not a fit for every lot, but it’s worth asking about.
Side-by-side, the way it actually plays out here
| Factor | Concrete | Asphalt |
|---|---|---|
| Upfront cost (Lewisville) | $4,500-$12,000 | $3,500-$9,000 |
| Clay movement | Cracks without a 4-inch compacted base and joints every 8-10 ft | Flexes with the soil – more forgiving |
| Summer heat (150°F+ surface) | Unaffected | Softens and can rut near the garage apron |
| Maintenance | Minimal; reseal joints as needed | Resealing every couple of years ($250-$700 per job) |
| HOA approval | Accepted nearly everywhere | Restricted in many northern master-planned subdivisions |
Your HOA may decide for you
Many of the master-planned subdivisions on Lewisville’s northern growth side carry deed restrictions that require concrete driveways. If you’re in one of those communities, the asphalt-vs-concrete question is already answered. What you still control is base prep depth and concrete mix PSI. That’s where the money should go, and it’s where a cheap bid quietly saves by cutting the one thing that matters.

What It Costs to Do It Right in Lewisville
We break base prep out as its own line item instead of hiding it in an allowance. You see the base thickness and the mix spec you’re paying for before anyone breaks ground. Upfront pricing, no surprises – the number you see is the number you pay. Compare that against a bid that just says “driveway, $6,000” and you’ll understand why the cheap quote so often turns into the expensive driveway.
Our full Driveway & Pavers work runs the gamut, but here’s what the two main materials land at in this market:
- Concrete driveway installation: $4,500-$12,000
- Asphalt driveway paving: $3,500-$9,000
- Full driveway replacement: $5,000-$14,000
- Driveway sealing: $250-$700
- Paver driveway (if you want to sidestep the choice entirely): $7,000-$18,000
And if the base prep or replacement pushes the number past $10,000, 0% financing for 18 months plus $1,000 off projects over $10,000 turns the right spec into an affordable decision rather than a corner you cut. That’s the whole point of financing done honestly – you shouldn’t have to choose between a thin base and a manageable payment.
If you’d rather see the full scope of what we handle, our Driveway & Pavers in Lewisville page lays out the paver options and the base work in detail, and you can always start from our home base to explore the rest.
Frequently Asked Questions
Concrete is the better default in Lewisville if it’s poured right – with a 4-inch compacted gravel base and control joints every 8-10 feet, it handles the heat without moving. Asphalt wins when your lot has badly moving clay or your budget can’t reach a properly prepped concrete pour, because its flexibility tolerates soil movement better. Neither survives a thin base.
Concrete driveway installation in Lewisville runs $4,500-$12,000, and asphalt paving runs $3,500-$9,000, so concrete costs more upfront. Don’t let the gap decide for you – the cheaper material becomes the expensive driveway if the base is cut short. Call (844) 560-4467 for an exact quote with base prep broken out – estimates are free.
It will if the base is too thin. The black gumbo clay under much of Lewisville heaves hard in wet-dry cycles, and a slab poured over a 2-3 inch gravel base (common in older tract subdivisions) will show differential cracking inside a decade. A proper 4-inch compacted base plus control joints at 8-10 foot spacing is what gives concrete a fighting chance against that movement.
Possibly, yes. Many of the northern master-planned subdivisions in Lewisville enforce deed restrictions that require concrete driveways, so asphalt may not be an option in those communities. Check your deed restrictions before you choose – and if concrete is mandated, put your attention on base depth and mix PSI, where the quality actually lives.
Get a Straight Answer for Your Driveway
If you’d rather have it looked at, Groundwork Construction Co. of Lewisville offers a no-pressure assessment in Lewisville – we’ll walk the lot, look at the soil and sun exposure, and tell you plainly which material your driveway can hold up under. Every project is covered by our 730-Day Done Right Promise, and a live person answers the phone 24/7. Call (844) 560-4467 for a free estimate.
Written by the team at Groundwork Construction Co. of Lewisville, serving Lewisville, TX.


