







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Paloma Creek South, TX: What It Costs and How It’s Approved
Concrete driveways and concrete flatwork in Paloma Creek South typically run $4,500 to $12,000 for a new driveway pour and $250 to $700 for sealing, with most residential jobs finished in three to five days. The bigger variable here isn’t the concrete itself, it’s the architectural review. Call (844) 560-4467 and we’ll walk you through both the pour and the paperwork on the same call, free of charge.
How our concrete work moves from demolition to cure, stage by stage

Concrete flatwork is unforgiving. You get one shot at the pour, so the days before it matter as much as the day itself. Here’s the real sequence we run in Paloma Creek South, with the decisions that fall to you at each step.
Stage 1: Site walk and approval check (days 1-3)
We measure the existing slab or bare lot, check slope and drainage away from the foundation, and pull the plat to confirm setback lines. This is also where we read your HOA’s architectural guidelines against what you’ve asked for. On Paloma Creek South lots, plat setbacks often run tighter than you expect, and a widening that looks fine on paper can cross a line the community enforces. You decide the footprint here, and we tell you honestly whether it will pass review before you spend a dollar.
Stage 2: HOA submittal and city permit (week 1-2)
We prepare the drawings, dimensions, and finish samples your architectural review board wants, then submit. The city permit for flatwork in Denton County is a separate track and can run alongside it. Expect one to three weeks depending on the board’s meeting schedule. You approve the finish color and joint pattern at this stage because those go on the application.
Stage 3: Demolition and base prep (day 1 of construction)
Out comes the old slab or the failing builder-grade concrete, usually a half day to a full day. Then we grade, compact, and build the base. On the clay soils under these homes, base prep is where a driveway lives or dies. You’ll see the excavation depth and the rebar or mesh layout before we pour, and we don’t move past this step until it’s right.
Stage 4: Pour, finish, and control joints (day 2)
The pour itself is a morning. Finishing takes the rest of the day. Control joints go in at a spacing that matches the slab thickness, and we cut or tool them based on the finish you chose. You’ll want to be home for this one. It’s the two hours where the driveway actually becomes a driveway.
Stage 5: Cure, seal, and final walk (days 3-7)
Concrete reaches working strength over about seven days. We keep vehicles off for at least that long and recommend waiting longer before parking a loaded truck. Sealing, if you opted for it, happens after a full cure. We do a final walkthrough, mark anything that needs attention, and hand over the paperwork, including the proof your approval and inspection passed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete options you’ll actually choose between in Paloma Creek South
Concrete isn’t one product. Here’s the honest trade-off of each decision that moves your price and your result.
- Standard broom finish – The workhorse. Textured for grip, hides tire marks, and costs the least of the finished options. It’s the safe choice for a driveway that has to clear HOA review without argument.
- Exposed aggregate – Pebble surface with real visual texture and excellent traction. Costs more per square foot and is harder to patch later, so it suits homeowners who plan to stay put.
- Stamped and colored concrete – Mimics the look of pavers or stone at a lower installed price than real pavers. Paloma Creek South’s architectural guidelines often restrict bold patterns on visible elevations, so check before falling in love with a stamp.
- Slab thickness and reinforcement – Four inches is standard for light residential use. Five to six inches with heavier rebar is worth the upcharge on a driveway that will see a heavy truck or a boat trailer.
- Sealer – Keeps out moisture and slows surface wear, especially under North Texas heat expansion. Reapply every two to three years.
If your project grows past flatwork into a wider hardscape, that’s part of a full Driveway & Pavers in Paloma Creek South plan, and the two scopes are easier to coordinate than to bolt together later.
What Concrete Driveways & Concrete Work costs in Paloma Creek South, TX

New concrete driveway installation in Paloma Creek South runs $4,500 to $12,000, replacement of an existing driveway runs $5,000 to $14,000, and sealing runs $250 to $700. That spread is wide because five things move the number.
- Square footage – The single biggest lever. A standard two-car approach sits near the bottom of the range; a wide, long approach with a turnaround pushes toward the top.
- Existing condition – Tearing out a failed slab, hauling debris, and re-grading add cost. Pouring over a bare, already-graded lot costs less.
- Base and soil work – Our clay soils can demand deeper excavation and a thicker compacted base than a homeowner expects. Cutting that corner is how driveways crack in three years.
- Finish and reinforcement – Broom finish at standard thickness is the low end. Exposed aggregate or stamping with heavier rebar is the high end.
- Approval and permit scope – Architectural review fees and city permits are real line items, and a more involved submittal takes longer.
A written estimate from us lists each of these separately, so the number you see is the number you pay. It also spells out what’s included and what isn’t: we cover demolition, hauling, base prep, reinforcement, the pour, finish, and joint cutting. Drainage re-grading beyond the slab edge and landscaping repair after the fact are the two things most often quoted separately elsewhere. Ask about them up front. Our Driveway & Pavers service overview covers how the flatwork fits with the rest of the hardscape.
See the difference
Before
After
Before
After
Before
AfterWhat Paloma Creek South homes specifically do to this job
Nearly every home here went up within the last decade and a half, built by production builders inside a defined developer footprint along US 380. That changes the work. We’re not repairing 40-year-old concrete; we’re replacing builder-grade slabs that are already showing early cracking, or pouring new flatwork on homes still finishing out. The clay soil under these lots shrinks and swells with the seasons, and that movement shows up in flatwork sooner than it would on better-graded ground. The bigger reality is the architectural review board. In Paloma Creek South, fence height, shed placement, exterior color, and driveway widening all route through HOA approval, and the rules often bind before the city permit even comes into play. We read those guidelines first, match your finish and dimensions to what the community allows, and prepare the submittal ourselves so the work is compliant from day one. When the job sits inside a larger site plan, homeowners often pair this with ADU Site Prep & Utilities in Paloma Creek South.
Serving Paloma Creek South, TX – Our Local Coverage Area
We serve Paloma Creek South and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Paloma Creek South

Plan on three to five days of construction time and one to three weeks ahead of it for architectural review and city permitting. The pour itself is a single morning. Call (844) 560-4467 for a firm timeline based on your lot.
Usually yes, and they are two separate processes. Paloma Creek South’s architectural review governs how the flatwork looks and where it sits within the plat, while the city permit governs the construction itself. We handle both submittals. Call (844) 560-4467 and we’ll tell you exactly which approvals your address triggers.
Most new driveway pours here land between $4,500 and $12,000, and replacement of an existing driveway runs $5,000 to $14,000. Size, base condition under our clay soils, finish choice, and approval scope are what move the figure. Call (844) 560-4467 for a free written quote.
In most cases yes. Driveway flatwork is a surface and base job, so plumbing and structure usually stay untouched. If the work reaches utilities or sits next to a door threshold you’re replacing, homeowners often pair this with Door Installation in Paloma Creek South so the whole approach gets finished in one pass. Call (844) 560-4467 and we’ll confirm on site.
Every concrete job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, and that’s in writing. Our technicians have up to 12 years of experience on flatwork. Call (844) 560-4467 to talk it through.
Get a free estimate for Concrete Driveways & Concrete Work in Paloma Creek South
Call (844) 560-4467 for a free on-site estimate. We measure the lot, check the setback and architectural guidelines, and hand you a written line-item quote covering demo through final joint cutting. A live person answers around the clock, so there’s no voicemail and no waiting until Monday. Upfront pricing, no surprises, and every job backed by the 730-Day Done Right Promise. We serve homeowners across Paloma Creek South and the surrounding 75068 corridor.
Written by the team at Groundwork Construction Co.












