







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow to Repair a Chain Link Fence in Lewisville, TX
Chain link repair starts with the frame, not the mesh: check the top rail for bending and the post bases for rust pitting at the soil line before you touch a single wire. If the rail is bent or a post base is compromised, patching the fabric is wasted effort because the frame can no longer hold tension. In most Lewisville repairs, the fix that lasts is re-tensioning the top rail and addressing corrosion first, then re-weaving or replacing only the damaged mesh. If you’re not sure which problem you’re looking at, call (844) 560-4467 and a live person will help you sort it out.

Why Chain Link Fails Differently Here Than Anywhere Else
Chain-link looks like the low-maintenance fence option until a Lewisville spring storm bends your top rail, the black gumbo clay under the yard keeps the post base wet year-round, and you’re patching mesh that’s pulling away from a frame that’s no longer straight. At that point you’re not fixing a fence. You’re delaying a replacement.
The North Texas pattern has two drivers. First, hail and high winds bow top rails before the mesh ever tears. A bent rail cannot hold tension no matter how cleanly you re-weave, and that’s the failure most homeowners diagnose backward. Second, the expansive clay that heaves slab foundations across Lewisville also retains moisture against galvanized steel posts at a rate you won’t see in sandy or loam soils. Rust pitting starts at the soil line and moves down. By the time the mesh sags, the post has usually been failing for a season or two.
Lewisville sits at the confluence of Lewisville Lake and the Elm Fork Trinity River, so the lakeside and floodplain-adjacent corridors drain differently than the higher ground in the northern subdivisions. In the older lake-adjacent yards, post bases tend to sit wetter longer. In newer northern builds, wind exposure and hail on exposed runs are usually the bigger factor. Same product, different failure clock.
The Two-Step Diagnostic: Rail First, Post Base Second
Before you buy mesh or picks, run this check. It takes about ten minutes and saves you from a repair that won’t hold.
- Sight the top rail. Stand at one end and look down the run. Any bow or kink means the tension line is broken. Mark it with tape so you know where the bend starts.
- Check post bases at the soil line. Push a screwdriver into the clay beside each post. If it sinks easily, the base is holding moisture. Look for flaking galvanized coating and orange pitting just above grade. Pitting below the surface means the post is compromised inside the wall and no amount of patch work will fix it.
- Test tension by hand. Push the mesh inward from mid-span. If it moves more than an inch or two, the tension wire or the rail connection is loose. That’s a frame problem, not a mesh problem.
- Check for hidden heave. A heaved chain-link post often does not visibly lean the way a wood post does. It lifts slightly, loosening the bottom tension wire and causing the mesh to sag or pull away from the bottom rail. If the mesh looks loose at the bottom but the posts look straight, you may have a heave, not a mesh failure.
Most of the misdiagnosis we see starts at step four. Homeowners replace mesh on a fence that has simply lifted a post an inch. The new mesh sags within a month.

Repairing Hail-Damaged or Torn Mesh
For a torn section on a straight run with a sound rail, the mesh repair itself is straightforward.
- Unwind the binding wire along the damaged section back to the nearest tension bar or line post.
- Cut clean at the damaged run end so you have a straight edge to weave into.
- Match the gauge. This is the most common DIY error we see in Lewisville: using 11-gauge mesh to patch a 9-gauge fence. It looks right for a season, then the lighter wire sags, pulls unevenly, and the patch fails. Match the original gauge or don’t patch.
- Weave in a matching roll using the same knuckle style (top and bottom) as the existing fence.
- Re-tension to the top rail with the tension bar, then re-tie binding wire every 2 feet along the rail and every 2 feet along line posts.
The mesh repair is a genuine DIY job if the rail is straight and the gauge matches. It stops being one when the rail has any bow at all. Springs, cables, and rail-end fittings are not high-tension hardware, but a loaded chain-link run that lets go under tension can still cut you badly. Work with gloves and eye protection, and don’t lean into a rail you already know is bent.
When a Rail Replacement Is DIY and When It Isn’t
A single straight section with clean rail-end fittings is manageable for a careful homeowner. You pull the rail, replace it with a matching length, re-seat the fittings, and re-tension. That’s a Saturday.
A corner post that took a hit from a downed tree limb is a different job. Once a corner shifts, the entire tension line has moved with it. Re-plumbing a corner post means resetting the post in fresh concrete, re-plumbing the two runs that meet it, and re-tensioning both directions. That’s when swapping a rail yourself becomes a game of chasing a sag from one end of the fence to the other.
If your fence needs a full replacement rather than a repair, our guide to Fence Installation in Lewisville covers materials, timelines, and what a new run looks like against the older landscape in Lewisville.
What Chain Link Repair Costs in Lewisville
Chain link repair pricing in Lewisville depends on whether you’re repairing a section or re-doing a run. Here’s how the numbers break down for typical Lewisville jobs:
| Repair type | Typical range |
|---|---|
| Section mesh patch (hail or torn) | $250-$550 |
| Top rail replacement (single straight run) | $200-$450 |
| Corner post reset and re-tension | $350-$700 |
| Full line post replacement (with concrete) | $200-$400 per post |
| Complete chain-link installation (Lewisville) | $3,500-$9,000 |
If you’re looking at repairs that add up beyond $1,500 on a fence older than 15 years, replacement usually wins on cost per year of service. Our full Fence Installation service covers replacement options, including premium vinyl and aluminum systems from Bufftech and ActiveYards for homeowners moving away from chain link entirely.
Groundwork Construction Co. of Lewisville uses no-hassle upfront pricing. The number you see is the number you pay. Calls are answered by a live person 24/7, and background-checked, uniformed technicians handle every job. Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise. Financing is available at 0% for 18 months, with $1,000 off projects over $10,000.
The Honest Answer When You Call
Most chain-link issues are decidable over the phone within a couple of minutes. If you call Groundwork Construction Co. of Lewisville, a live person picks up around the clock and asks the two diagnostic questions: is the rail straight, and are the post bases rusted at the soil line? If both check out, we’ll tell you it’s a DIY patch and describe the gauge and length you need. If either fails, we’ll tell you it needs a truck.
That’s the point of the live line. No upsell pressure. Straight answer. Same team handles every call as it comes. No voicemail, no waiting until Monday morning.
FAQs
Yes, if the top rail is straight and the post bases are sound. Small mesh patches, single rail replacements on straight runs, and tension-wire re-ties are all reasonable DIY repairs. If the top rail is bent, a corner post has shifted, or a post base shows rust pitting at the soil line, it’s a trade job because the frame can no longer hold tension. Call (844) 560-4467 for an honest read on which one you’re facing.
Most chain link repairs in Lewisville run $250 to $700 for section work, with full replacement at $3,500 to $9,000 for a typical residential run. Full line post replacement runs $200 to $400 per post including concrete. Once repairs on a fence past 15 years clear $1,500, replacement usually makes more sense. Call (844) 560-4467 for an exact quote; estimates are free.
Because the post has likely heaved, not leaned. Lewisville’s clay heaves in drought-then-flood cycles, and a chain-link post often lifts slightly instead of tilting visibly, which loosens the bottom tension wire and lets the mesh pull away at the bottom. That reads as a mesh problem but is a post-base problem. Don’t replace the mesh until you’ve checked the post height against its neighbor. Call (844) 560-4467 if you want it looked at.
Keep the soil drained away from the post base and don’t pile mulch against the steel. In Lewisville’s expansive clay, water sits against galvanized steel longer than in sandier soil, so pitting starts at the soil line and moves down. Setting the post base on a small gravel bed during installation is the best long-term fix; on an existing fence, cutting the soil back an inch and keeping weeds off the base helps but won’t reverse pitting. Call (844) 560-4467 if you want a replacement quote.
Rather Have It Looked At?
If you’d rather have it looked at, Groundwork Construction Co. of Lewisville offers a no-pressure assessment in Lewisville. Call (844) 560-4467 for a free estimate. A live person will help you decide between a Saturday patch and a proper replacement, and you’ll know the number before anyone shows up. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Lewisville, serving Lewisville, TX.


