







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Providence Village, TX: What the Job Actually Involves
Paver driveways in Providence Village, TX typically run $7,000 – $18,000 for a standard two-car approach, and the work usually takes three to five days from demolition to final sealer. You’re looking at excavation of the existing surface, a compacted aggregate base, edge restraint, sand setting bed, pavers, and polymeric sand in the joints. Call (844) 560-4467 for a free on-site estimate and a written line-item quote before anything gets torn out.
How We Build a Paver Driveway, Stage by Stage

Every paver driveway we install follows the same sequence, and each stage has a decision point where you weigh in. Here’s what the week looks like.
Day 1: layout, demo, and haul-off. We mark the final footprint against the garage apron and the street cut, confirm the slope away from the slab, and then break out the old surface. Most Providence Village driveways are builder-grade concrete from the original subdivision phase, so removal is straightforward. Haul-off of the broken material happens the same day so your driveway isn’t a debris field overnight. You decide right here on the edge detail: paver soldier course, exposed aggregate border, or a plain cut edge.
Day 2: excavation and base. This is the stage nobody sees and the one that decides whether your pavers stay flat. We excavate to depth, then build up a compacted crushed-stone base in lifts, compacting each lift before the next goes down. On Blackland Prairie clay, drainage under the pavers matters more than the pavers themselves. You’ll want to know the base depth we’re using, and we’ll tell you in writing: it varies with whether the driveway carries just cars or a heavy truck.
Day 3: edge restraint, bedding sand, and the first courses. We set the edge restraint and pin it, screed the bedding sand to grade, and lay the first courses off a string line. The pattern gets locked in here. Herringbone holds up best under turning tires; running bond is cleaner visually and cheaper to lay. You pick the pattern before this stage, not during it.
Day 4: field pavers and cuts. The bulk of the field goes down, then we make the cuts at the garage apron, the street transition, and any curved border. Cut quality is where cheap jobs show. Chipped edges at the apron are the first thing anyone notices.
Day 5: polymeric sand, compaction, cleanup. We sweep polymeric sand into the joints, activate it with water, run a plate compactor over the field, and clean the surface. Full curing on the joint sand takes about 24 hours before you drive on it. We walk the finished driveway with you and note anything that needs attention.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on a paver driveway come down to material, thickness, and pattern. Here’s the honest trade-off on each.
- Concrete pavers (the standard choice): Manufactured to consistent size, rated around 8,000 psi, and made for freeze-thaw and heavy loads. Belgard is a name you’ll see in this market and a brand we source. These are the right call for a driveway.
- Clay brick pavers: Genuine fired clay, warmer color, and it holds color longer under North Texas sun. It costs more per square foot and is more brittle on delivery, and installation demands a careful base. Suits a homeowner who wants the classic look and will pay for it.
- Paver thickness: 60mm is fine for a walkway. For a driveway carrying cars and trucks, you want 80mm. Don’t let anyone quote a driveway in 60mm pavers to hit a number.
- Pattern: Herringbone is the most durable under turning wheels; running bond and basketweave are easier on the budget. Pattern changes your waste factor, which moves the material cost a few percent.
- Border and accent: A contrasting soldier course or a charcoal border adds curb definition. It also adds cuts and labor, so expect it to sit at the upper end of the range.
- Permeable system: Open-graded base with gapped joints and a drainage layer. It costs more upfront but handles runoff well on tight lots. Worth a conversation if your driveway slopes toward the house.
What Paver Driveways Cost in Providence Village, TX

The short answer: $7,000 – $18,000 for a paver driveway installation here. A standard two-car driveway lands in the middle of that range; a three-car or heavily bordered design pushes the top.
What moves the number:
- Square footage: A two-car driveway runs roughly 400 – 600 square feet, a three-car 600 – 900. Every extra hundred square feet is real material and real base work.
- Existing surface: If there’s old concrete to break out and haul, that’s a line item. A driveway that’s already excavated to grade saves you money.
- Base and drainage: Clay soil that doesn’t drain may need extra base depth or a drainage correction. Slopes that fall toward the garage cost more to correct than a flat lot.
- Material grade: Clay brick runs higher than concrete pavers. A border, upgraded color, or permeable base each add.
- Permit and HOA review: Architectural review and permitting are not free, and in Providence Village they’re not optional. We pull the permits and get the review done; the cost shows up in your written estimate, not as a surprise.
What’s in a written quote: demo, haul-off, base, compaction, pavers, edge restraint, sand, seal activation, cleanup, permit fees. What’s usually not: landscaping repair around the edges, gate relocation, or grading changes to the yard beyond the driveway footprint. Those get quoted separately so you can see exactly what you’re paying for. That’s the upfront pricing, no surprises approach we work from.
See the difference
Before
After
Before
After
Before
AfterWhat Providence Village Homes Specifically Do to This Job
Providence Village is a master-planned, HOA-heavy community built almost entirely after 2000 on former ranch land north of US 380. That single fact changes how a paver driveway gets done here. You’re not repairing historic structures; you’re working inside architectural review rules. The HOA’s architectural review committee has to approve exterior changes before a permit is even pulled, and that includes driveway material, color, and pattern. We’ve walked submittals through that process before, and we build the review timeline into the schedule so it doesn’t stall the job.
The soil is the other factor. These lots sit on Blackland Prairie clay that expands and contracts hard with North Texas wet-dry cycles. Slabs, driveways, and retaining walls here crack and shift as a matter of course. A paver driveway laid on a properly compacted, well-drained base tolerates that movement far better than a poured slab, which is one reason a lot of homeowners in the newer phases make the switch. Because so many homes were built by the same handful of production builders, we see the same builder-grade driveway failure points block after block, and we know where the grading already fights the foundation before we start digging.
This is a narrow piece of a larger project. If your pavers are part of a full Driveway & Pavers in Providence Village plan that includes a walkway or patio, that’s the page to start on, and our driveway & pavers service covers the range. We handle Providence Village and the surrounding corridor, and homeowners often pair this with Door Installation in Providence Village once the garage apron is reset, or with Cabinets & Countertops in Providence Village when the whole curb-to-kitchen refresh is on the table.
Serving Providence Village, TX – Our Local Coverage Area
We serve Providence Village and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Providence Village

A standard paver driveway takes three to five working days once the HOA review and permit are in hand, and the review timeline itself can add one to three weeks before work begins. Call (844) 560-4467 and we’ll map your specific timeline, including the architectural review, into a written schedule.
Yes. In Providence Village you’ll need both the HOA’s architectural review approval and a permit before the driveway is replaced. We handle the permitting and the review submittal as part of the job, and we don’t start demo until both are cleared.
In most cases yes. A paver driveway is a surface and base job; we’re not moving plumbing, electrical, or structural work. Where the existing lot slopes toward the house, we may recommend a drainage correction, and we’ll tell you in the written quote before any change is made.
Expect $7,000 – $18,000 for installation, with the low end for a straightforward two-car layout and the high end for larger footprints, brick, borders, or drainage corrections. Call (844) 560-4467 for an exact quote; estimates are free and line-itemed.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties from the paver manufacturer come on top of that. Ask for the written guarantee at estimate, and you’ll have it.
Get a Free Paver Driveway Estimate in Providence Village
If you’re ready to price a paver driveway, the next step is a free on-site estimate. We’ll measure the footprint, check the base and drainage, walk you through material and pattern options, and hand you a written line-item quote with the permit and HOA review built in. Call (844) 560-4467 and a live person answers, day or night. We’ll schedule a time that works for you.
Written by the team at Groundwork Construction Co.












