







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWindow Replacement Cost in Lewisville, TX: What You’ll Actually Pay in 2026
Window replacement in Lewisville runs $4,500 to $15,000 for a typical whole-house project, which works out to roughly $450 to $1,200 per window installed. That range assumes full-frame replacement, because most Lewisville homes built before the mid-1980s have original aluminum single-pane frames that can’t accept an insert. If your home is newer, insert replacement starts lower, around $300 to $700 per window. For an exact number on your address, call Groundwork Construction Co. of Lewisville at (844) 560-4467. Upfront pricing, free estimate, no surprise line items at the end.

Why Lewisville Windows Cost More Than the National Average
The $400 to $900 per window figure you’ll find on national pricing sites is almost always an insert (pocket) replacement quote. That’s a fair number for a 2005 tract home in the northern growth zones where the original vinyl frames are still square and plumb. It’s the wrong number for a 1972 brick ranch in Old Town or a lakeside cottage near Lewisville Lake.
Here’s the difference, in plain terms. Insert replacement sets a new sash and frame inside your existing window opening. It’s faster, less invasive, and cheaper. Full-frame replacement pulls the entire window out to the rough opening, addresses any rot or framing issues behind it, and installs a complete new unit with new flashing and trim. When you have aluminum single-pane frames from the 1960s through early 1980s, insert doesn’t work: the frames are too thin, the thermal bridging is built in, and there’s nothing sound to anchor to. Full-frame is the honest scope.
Lewisville’s split housing stock is the reason pricing here swings so widely. The city runs a two-speed market. Older neighborhoods near the lake and the historic core carry aging frames that need full-frame work, while newer subdivisions to the north typically qualify for insert. Same city, very different job.
Insert vs. Full-Frame: Which One Does Your Lewisville Home Need?
A quick way to sort it. Look at the frame depth and material, not the glass.
- Insert (pocket) replacement, $300-$700 per window: existing frame is solid wood or vinyl, square, and at least 3 inches deep. Common in 1990s and 2000s tract homes and new construction.
- Full-frame replacement, $600-$1,200+ per window: original aluminum single-pane, thin-profile frames, visible rot, failed seals, or windows that no longer meet egress. Typical of pre-1985 Lewisville homes.
- Full-frame plus framing repair: when we pull a window and find soft wood or termite damage behind it, that gets addressed before the new unit goes in. Hidden rot is the single most common reason a quote moves, and the reason upfront pricing matters. We look before we quote, not after.
Groundwork installs Andersen and Marvin lines, both of which offer insert and full-frame configurations across their product tiers. If you’re unsure which scope your home requires, the walkthrough settles it in about 20 minutes.

Solar Heat Gain Coefficient: The Spec That Actually Cuts Your Summer Bill
Most window shopping focuses on U-factor. In North Texas, that’s backwards. U-factor measures heat loss, which matters in Minnesota. Solar heat gain coefficient (SHGC) measures how much solar heat passes through the glass, which is the number that moves your cooling bill from May through September.
A low-SHGC window at 0.25 or below can cut summer cooling load by 20 to 30 percent on a south- or west-facing exposure. That’s the wall of glass taking direct afternoon sun while your AC runs nonstop. Ask for the SHGC rating on any quote, and understand which direction each window faces. A spec sheet that lists one SHGC number for the whole house is telling you the installer didn’t think about orientation. We spec per exposure.
This is also where the ROI math separates from northern climate buyers. Their payback comes in heating season. Yours comes in cooling season, plus protection from the kind of spring hail that rolls through North Texas most years. Impact-rated glass and low-SHGC glass solve different problems, and the right line depends on the window’s placement.
Egress Compliance: A Fix Worth Doing During Replacement
Homes built before 1990 often have bedroom windows that don’t meet current IRC egress minimums. The standard calls for a clear opening of at least 5.7 square feet, with a minimum width and height so a person can exit in an emergency. A full-frame replacement is the moment to bring those windows into compliance, because you’re already opening the rough opening to the framing.
Two reasons to handle it now rather than later. First, safety: an egress-compliant window is an escape route, not a decoration. Second, resale. A bedroom that doesn’t meet egress is a problem a buyer’s inspector will flag, and it’s far cheaper to fix during a planned replacement than as a standalone job after the fact. When we walk a Lewisville home, we check every bedroom window against the standard and tell you plainly which ones need attention.
Real Installed Prices for Lewisville Window Projects
These are installed ranges, calibrated to DFW labor and material costs, not national averages. The exact figure depends on window count, size, glass package, and whether the scope is insert or full-frame.
| Project | Typical Installed Range |
|---|---|
| Insert replacement (per window) | $300-$700 |
| Full-frame replacement (per window) | $600-$1,200+ |
| Andersen 400 Series (per window, installed) | $700-$1,100 |
| Marvin Elevate (per window, installed) | $850-$1,300 |
| Whole-house window replacement (10-15 windows) | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
The two product lines above are worth understanding before you compare bids. Andersen 400 Series is a proven workhorse for this climate, with strong availability and a solid warranty story. Marvin Elevate sits a step up in finish and frame quality, which shows up on the interior trim. Both are sold through Groundwork’s verified brand partnerships, so you’re choosing quality, not just whatever a warehouse happens to stock. The full lineup lives on our Windows & Doors page.
Where financing fits: a 15-window full-frame project at $700 to $900 per window runs $10,500 to $13,500, which clears the $10,000 threshold for $1,000 off projects over $10,000. Combine that with 0% financing for 18 months, and a whole-house replacement becomes a monthly payment instead of a lump-sum hit. The 730-Day Done Right Promise backs the installation in writing: if it’s not done right, we make it right, for two full years.
What to Look For in a Lewisville Window Quote
Four things separate a real quote from a sales pitch. Ask for all four before you sign anything.
- The scope, in writing. Insert or full-frame, stated explicitly, with framing repair priced separately if discovered.
- Per-exposure SHGC ratings. Not one number for the whole house.
- Egress confirmation for every bedroom, especially in homes from before 1990.
- The final number, not a starting point. A quote that changes after the deposit is not a quote.
Our technicians have up to 12 years of experience, all background-checked and arriving in uniform. Calls are answered by a live person 24/7, so you’re never routed to voicemail when a question comes up mid-project. And every job is coordinated through our Lewisville service area team from first walkthrough to final punch list.
FAQs
Window replacement in Lewisville costs $4,500 to $15,000 for a typical whole-house project, or roughly $450 to $1,200 per window installed depending on scope. Insert replacement runs $300 to $700 per window; full-frame runs $600 to $1,200 or more. Pre-1985 homes with original aluminum frames almost always need full-frame. Call (844) 560-4467 for an exact quote – estimates are free.
Repair is cheaper only when the frame is sound and a single component has failed, like a cracked pane or a broken balance. Once the frame is aluminum, thin, or showing rot, replacement costs less over a few years because repair doesn’t fix the thermal loss or the egress problem. In a Lewisville home from before 1985, full-frame replacement is usually the better long-term spend.
A single window or a small batch can often be completed in one visit, while a whole-house project typically runs one to two days. Most jobs are completed in a single day where the scope allows. Call (844) 560-4467 and we’ll tell you what your project looks like on the calendar.
Impact windows aren’t required by code in Lewisville, but they make sense if you want hail and high-wind protection through North Texas storm season. Impact installation runs $8,000 to $25,000 for a full house. For most homeowners here, the bigger everyday return comes from low-SHGC glass that cuts summer cooling load. Call (844) 560-4467 and we’ll walk through both options for your home.
Get a Straight Number on Your Lewisville Windows
National pricing guides don’t know your frames. We do. Groundwork Construction Co. of Lewisville walks your home, tells you insert or full-frame in plain language, and hands you an upfront number that holds. Free estimate, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (844) 560-4467 today – a live person answers, day or night.
Written by the team at Groundwork Construction Co. of Lewisville, serving Lewisville, TX.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












