







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Farmers Branch: What It Costs and How Long It Takes
Asphalt Driveways & Resurfacing in Farmers Branch typically runs $3,500 to $9,000 for a full new asphalt driveway, and $250 to $700 for a reseal coat when the base is still sound. A straightforward residential driveway is usually two working days: one for grading and base, one for the asphalt lift. Call (844) 560-4467 for a free on-site estimate with a written line-item price.
How we build and resurface an asphalt driveway, start to finish

Asphalt is a sequence, not a single pour, and the schedule matters more than the equipment. Here’s what actually happens on a Farmers Branch driveway, in order.
Day 1, morning: tear-out and subgrade
We strip the old surface and haul it off. For a resurface, we skip the tear-out and instead grind the failed patches back to sound asphalt. The subgrade gets cut to depth and compacted in lifts. On the clay soils here, that compacted base is the part that decides whether the driveway lasts eight years or twenty.
Day 1, afternoon: base course and grading
Crushed limestone base goes down and gets watered and rolled. This is the stage where we set the slope that carries stormwater toward the street or a drainage point, and where you decide once and for all whether a widened apron or an extra parking pad goes in. Any change to the footprint has to happen now, not after paving.
Day 2, morning: asphalt placement
Hot-mix asphalt arrives and gets laid at 2 inches compacted for a residential drive, or 3 inches where a heavy truck will sit. We roll it while it’s still hot. A typical two-car driveway takes a few hours to place and roll.
Day 2, afternoon and after: edges and curing
Edges get tamped and trimmed. You can walk on it the same day and park on it in 48 to 72 hours depending on heat and sun. North Texas summer heat actually helps here; a cool, wet stretch slows cure.
Week 6 to 12: seal coat
New asphalt needs to cure before its first seal, usually 6 to 12 months out. After that, resealing every 2 to 3 years is what keeps a Farmers Branch driveway from turning gray and raveling. Getting this schedule right is the difference between a $3,500 job and a $9,000 one.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the decisions happen before the first truck rolls. Here’s the honest trade-off on each.
- New asphalt over an existing base vs. full tear-out. A resurface sits on the old base and saves money, but only when that base is still intact. If we find pumping or alligator cracking during the estimate, we’ll tell you the old base has to come out.
- 2-inch vs. 3-inch compacted thickness. Two inches handles cars and standard trucks. Three inches costs more but holds up to trailers, RVs, or regular heavy loads. For a tight infill lot, the thicker lift can actually reduce how often you reseal.
- Hot-mix grade. Standard hot-mix is what we use for driveways. Higher-grade mixes are reserved for commercial work and rarely worth the premium here.
- Edge treatment. Exposed aggregate or a concrete curb along the edge extends life on a narrow driveway where tires ride the margin. On a standard-width drive it’s mostly a look.
- Seal coat timing and product. Asphalt-based sealers last longer but take longer to cure. Acrylic sealers dry faster but need reapplication sooner. We’ll recommend based on how the driveway is used.
- Drainage corrections. A swale, a channel drain, or a regraded apron can easily be the biggest line item. On lots platted for one-story ranches, this is where a modern driveway build gets interesting.
What Asphalt Driveways & Resurfacing costs in Farmers Branch, TX

Here are the ranges we quote in Farmers Branch. These are real numbers, not a teaser.
| Job | Typical range |
|---|---|
| Full asphalt driveway paving (new) | $3,500 – $9,000 |
| Driveway replacement (tear-out + new) | $5,000 – $14,000 |
| Seal coat / reseal | $250 – $700 |
What moves the number up or down:
- Square footage. A single-car apron at 300 sq ft prices very differently from a 700 sq ft two-car plus turnaround.
- Existing condition. Sound base means a resurface. Failed base means tear-out, haul-off, and fresh base, which is where the low end becomes the high end.
- Access and staging. On a fully occupied Farmers Branch block, a dumpster or roller has to fit in the driveway and the street. Tight access adds labor.
- Drainage and grading. If stormwater has to be redirected to keep it off a neighbor’s slab, that’s a line item.
- Permits and inspection. Some work triggers a right-of-way or drainage review, which adds time and a filing cost.
A written estimate from us lists tear-out, base depth, asphalt thickness, edge treatment, drainage work, and disposal separately. What it doesn’t include: landscape repair beyond the driveway footprint, or seal coat, which is quoted separately because it’s a future job.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch homes specifically do to this job
Farmers Branch is a built-out inner-ring Dallas suburb. Almost all new construction here is infill and redevelopment, which means teardowns of 1950s-60s brick ranch homes replaced with larger custom builds on the same lots. Contractors work in tight, fully occupied residential blocks where staging and neighbor relations matter as much as lot size. That directly changes an asphalt job: the roller has to fit, the street has to stay clear, and the drainage has to be engineered so runoff doesn’t cross a property line. The expansive clay under most of these lots swells and shrinks with wet-dry cycles, which is exactly why a properly compacted base and correct slope matter more here than in a newer subdivision. Because the original lots were platted for one-story homes, two-story infill builds on those same 7,000-8,000 sq ft lots often push setback and impervious-cover limits, so we routinely redesign grading to keep stormwater off the neighboring slab. If your project is part of a full Driveway & Pavers in Farmers Branch scope, we can plan the asphalt and the hardscape together.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Farmers Branch

Most residential driveways are two working days, weather permitting: one for tear-out and base, one for asphalt placement. Parking is allowed within 48 to 72 hours, and seal coat comes 6 to 12 months later. Call (844) 560-4467 to schedule a free estimate and get a firm timeline for your driveway.
It depends on whether the work touches the right-of-way or changes drainage. A same-footprint resurface usually doesn’t need a permit; a new driveway or a drainage change often does. We’ll tell you exactly what applies to your property during the estimate, and we file what’s needed.
Yes, if the base is still sound and there’s no significant pumping or alligator cracking. During the estimate we probe the base and check for soft spots. If it’s failed, resurfacing would only buy a couple of years, so we’ll quote a full replacement instead of selling you a coat over a bad base.
New asphalt driveway paving runs $3,500 to $9,000. A full replacement with tear-out is $5,000 to $14,000, and resealing is $250 to $700. Call (844) 560-4467 for an exact quote on your driveway. Estimates are free, and the written number is the number you pay.
Our asphalt work is covered by the 730-Day Done Right Promise. If something we installed fails within that window, we come back and make it right. That’s backed in writing, and it’s one of the longest workmanship guarantees in residential construction.
Get a free on-site estimate for your Farmers Branch driveway
We walk the driveway, probe the base, check the slope, and quote tear-out, base, asphalt thickness, and drainage as separate line items. No surprise change orders, no vague per-square-foot math. Call (844) 560-4467 to schedule your free estimate for Asphalt Driveways & Resurfacing in Farmers Branch. Homeowners often pair this with Chain Link Fence in Farmers Branch or ADU Site Prep & Utilities in Farmers Branch, and we can scope it all in one visit. You can also explore our Driveway & Pavers service or check our Farmers Branch service area.
Written by the team at Groundwork Construction Co.












