







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Farmers Branch, TX: What the Job Actually Involves
Door installation in Farmers Branch typically runs $850 to $3,200 per opening for an exterior door, and $350 to $1,400 for an interior slab or prehung door, with most single-door jobs finished in one to two days once the unit is on site. The bigger variable here isn’t the door itself, it’s what’s behind the trim: 1950s and 60s ranch stock in Farmers Branch means rough openings that have shifted, settled slabs, and original cast-iron-era framing that has to be checked before anything new goes in. Call (844) 560-4467 for a free on-site estimate and we’ll measure the opening, not just quote a catalog price.
How a Door Installation Comes Together, Stage by Stage

Every door we set follows the same five-stage sequence. The order matters as much as the work, because skipping a step on a Farmers Branch ranch is how you end up with a door that sticks every summer.
Stage 1: Measure and open up (day 1, 1 to 2 hours). We pull the interior casing and check the rough opening, the header, and the framing on both sides. On older homes this is where we find the surprises: a header that’s been notched for old wiring, a sill that’s rotted behind the brick, or a rough opening that’s out of square by half an inch from fifty years of clay movement. You get the real picture before anyone commits.
Stage 2: Demo and prep (day 1, 2 to 3 hours). Out comes the old unit, threshold and all. We inspect the sheathing and the sill pan, replace any soft wood, and flash the opening correctly. This is the step the fast-and-cheap crowd skips, and it’s the single biggest reason a new door leaks within a year.
Stage 3: Set and shim (day 1, 1 to 2 hours). The new door goes in plumb, level, and square, shimmed at the hinges and the strike. You decide here on the swing direction if it wasn’t already fixed, and we confirm the hardware layout with you before we drill anything.
Stage 4: Insulate, seal, and trim (day 2, 2 to 3 hours). Low-expansion foam around the frame, a proper bead of exterior sealant, and new interior casing and exterior trim. On a brick ranch this is fiddly work because the trim has to marry the new frame to the existing brick mold cleanly.
Stage 5: Hardware, finish, and walkthrough (day 2, 1 to 2 hours). Lockset, deadbolt, closer if it’s a storm or security door, and a full open-and-close cycle to check the reveal. You sign off on the swing, the latch, and the seal before we pack up. Most single-door jobs are done inside two working days; a full front-entry system with sidelights can push to three.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Actually Choose Between
The door you pick drives most of the price and all of the long-term satisfaction. Here’s what we walk homeowners through, and the honest trade-off on each:
- Steel entry doors. The workhorse for a Farmers Branch front door. Strong, secure, and holds paint well. Trade-off: they dent, and in our hail-and-wind climate a good storm can leave a mark. Best for the main entry where security is the priority.
- Fiberglass entry doors. Won’t dent, won’t rust, and takes a stain or paint finish. Costs more up front than steel but handles North Texas heat and hail better. The right call if you want the look of wood without the upkeep.
- Solid wood doors. Beautiful, and the finish flexibility is unmatched. Trade-off: they move with humidity and need re-finishing every few years here. Suits a covered entry; we steer people away from full-sun exposures.
- Prehung vs. slab. A prehung unit comes with its frame and is faster to set, which is what most replacements call for. A slab reuses the existing frame and only makes sense when the frame is still sound and square, which on a 1960s ranch is the exception, not the rule.
- Interior doors. Hollow-core for closets and budget rooms, solid-core for bedrooms and anywhere you want sound control. The jump to solid-core is small money for a big difference in how a house feels.
- Hardware and finish. Oil-rubbed bronze, matte black, and satin nickel in standard residential grades. A quality lockset and deadbolt is worth the upgrade; builder-grade hardware is the first thing to fail.
We keep a curated set of brand partners across every trade, so the door and the hardware come from suppliers we trust rather than whatever the box store has on the shelf that week. Here in Farmers Branch where redevelopment is constant, we also see homeowners matching new doors to the Andersen and Marvin units going into the infill builds next door, and we can spec to that look if you want it.
What Door Installation Costs in Farmers Branch, TX

Plan on $850 to $3,200 for an exterior door installed, and $350 to $1,400 for an interior door installed, with a full front-entry system with sidelights landing at the top of that range or a little above. Here’s what moves the number:
| Cost Driver | Low End | High End |
|---|---|---|
| Interior prehung door, installed | $350 | $900 |
| Interior solid-core door, installed | $550 | $1,400 |
| Exterior steel entry door, installed | $850 | $1,800 |
| Exterior fiberglass entry door, installed | $1,200 | $2,600 |
| Front-entry system with sidelights | $2,000 | $3,200+ |
| Storm / security door, installed | $400 | $1,200 |
The four variables that push a job toward the low or high end: opening condition (a straight, sound rough opening is the low end; rot, a rotted sill, or an out-of-square frame adds labor and materials), material grade (steel vs. fiberglass vs. solid wood), configuration (a single door vs. a door with sidelights or a transom), and trim and finish scope (whether you’re replacing casing and exterior trim or reusing it). A written estimate from us lists every line, and it doesn’t change once work starts. That’s our upfront pricing promise: the number you see is the number you pay.
What’s typically included: removal and disposal of the old door, flashing and sealant, new hardware, trim, and cleanup. What’s typically not: structural reframing if the header is compromised, and any permit fee if the scope crosses into a wall or egress change. We’ll tell you which side of that line your job is on at the estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Most of the housing stock here is 1950s to 1970s single-story brick ranch on slab, and that build era shapes every door we touch. Original doors in these homes are past their service life, so the rough openings have taken fifty or sixty years of our expansive clay soils swelling and shrinking with every wet-dry cycle. What that looks like on the job: frames that are out of square, doors that bind in the summer and rattle in the winter, and sills that have quietly rotted behind the brick where the old flashing failed. Because redevelopment is replacing whole chunks of that stock with two-story infill builds on the same 7,000 to 8,000 sq ft lots, we set a lot of new doors on streets where a 1962 ranch sits next door to a 2022 build, and both have to live with the same tight setback and drainage line.
Two practical realities here. First, staging and driveway access matter more than most contractors admit: these are tight, fully-occupied residential blocks, so we plan deliveries and material drops around neighborhood traffic, and we keep the debris haul to one trip. Second, if your door replacement is part of a full Windows & Doors in Farmers Branch upgrade, we’ll sequence it with the rest of the envelope work so you’re not paying twice for trim and access. If the door is going into a converted space, homeowners often pair this with Cabinets & Countertops in Farmers Branch once the room is buttoned up.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Farmers Branch

A single door is a one-to-two-day job: demo and prep on day one, set, seal, and trim on day two. A front entry with sidelights can run to three days. Call (844) 560-4467 for a timeline on your exact opening.
Like-for-like replacement of an existing door in the same opening usually doesn’t require a permit; widening an opening, changing the header, or altering egress typically does. We’ll tell you at the estimate whether your job crosses that line, and we handle the permitting when it does.
In most cases yes. A straight replacement reuses the rough opening, and no plumbing or structural work is involved. Only a widened opening or a new door in a wall that didn’t have one changes the scope. Call (844) 560-4467 and we’ll take a look.
Interior doors run $350 to $1,400 installed; exterior doors $850 to $3,200, with a front entry system at the top. Call (844) 560-4467 for an exact quote, and your estimate is free.
Every door we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we make it right. Call (844) 560-4467 with any questions.
Get a Free Door Installation Estimate in Farmers Branch
If your Farmers Branch door is sticking, leaking, or just past its service life, the next step is a free on-site estimate. We come out, measure the opening, show you the real options, and put a written line-item price in your hands, backed by our 730-Day Done Right Promise. Call (844) 560-4467 and a live person will pick up, any time. Our windows & doors service covers the full scope if you want to compare, and you can see the rest of what we do on our Farmers Branch service-area page.
Written by the team at Groundwork Construction Co.












