







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Paloma Creek South, TX: What the Job Actually Involves
A paver driveway in Paloma Creek South usually runs $7,000 – $18,000 and takes three to five working days from demo to final compaction, depending on square footage and whether the base needs re-engineering. Most of the homes here were built within the last ten to twenty years, so we’re almost always replacing a builder-grade concrete apron rather than tearing out something old and failing. Call (844) 560-4467 and we’ll walk your lot, check the base, and put real numbers in writing before anything gets ordered.
How We Build a Paver Driveway Here, Stage by Stage

Every driveway we pour, set, and compact follows the same sequence. The order matters more than the speed.
- Day 1 – Demo and haul-off. We break out the existing slab or apron, load it, and clear the subgrade down to native soil. On Paloma Creek South lots this usually takes most of a morning. You decide here whether the new driveway keeps the same footprint or gains width toward the garage, since that choice affects base depth and drainage fall.
- Day 1-2 – Excavation and base prep. We cut to grade, then build a compacted crushed-stone base in lifts. This is the stage nobody sees and the one that decides whether your driveway stays flat for fifteen years. North Texas clay moves with the seasons, so we over-excavate and compact in shallow layers instead of one thick dump. Expect a full day, sometimes two on a wide driveway.
- Day 2-3 – Edge restraint and bedding sand. We set the edge restraint, screed the bedding layer to grade, and confirm the slope runs water toward the street and away from the slab. You sign off on the layout before a single paver goes down.
- Day 3-4 – Paver installation and cutting. The field goes in fast; the cuts around the garage apron, walkway tie-ins, and any radius work take the time. This is where your pattern and color choices become a real driveway, and where a rushed crew leaves visible gaps.
- Day 4-5 – Compaction, joint sand, and cleanup. We compact the finished surface, sweep polymeric joint sand into the seams, and water it in. We walk the job with you, hose it down, and hand over the care sheet. Full cure and lock-in of the joint sand takes a few more days of normal weather.
What you decide, and when: footprint on day one, base depth and drainage once we expose the subgrade, pattern and color before day three, and edge details at layout sign-off. Everything else is on us. Our technicians have up to 12 years of experience on paver work, and every driveway carries our 730-Day Done Right Promise – if a paver settles or a joint fails inside that window, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Your Paver Driveway
Most of the decisions on a paver driveway come down to four choices. Here’s the honest trade-off on each.
- Concrete pavers vs. clay brick. Concrete pavers are the workhorse for a driveway – dense, frost- and heat-tolerant, and the price range you see above is built around them. Clay brick pavers cost more and hold color longer, but they’re heavier to install and can chip under heavy point loads. For a Paloma Creek South driveway carrying two cars daily, concrete pavers are the practical pick.
- Thickness and grade. A driveway wants a 60mm or 80mm paver, not the 40mm units used on patios and walkways. Go thin to save money here and you’ll be resetting cracked pavers within a few summers of Texas heat expansion.
- Pattern. Herringbone and running bond interlock best and resist shifting under tire traffic. A basketweave looks great on a wide apron but needs a deeper base to stay flat. The tighter the interlock, the longer the driveway holds its lines.
- Color and finish. Standard gray or tan runs at the low end. Premium tumbled or blended-color pavers from a line like Belgard push you toward the top of the range. If your HOA architectural review board has an approved palette for exterior hardscape, choose from that list before you fall for a color you can’t build.
Homeowners in Paloma Creek South often pair a new driveway with a matching walkway or front entry so the whole approach reads as one design – that’s part of a full Driveway & Pavers in Paloma Creek South project, and it’s a natural place to start if the concrete apron is already getting replaced.
What Paver Driveways Cost in Paloma Creek South, TX

Plan on $7,000 – $18,000 for a paver driveway installation in Paloma Creek South, with a typical two-car driveway landing in the middle of that range. Here’s what actually moves the number.
- Square footage. A single-car apron and a wide two-car driveway with a turnaround can be a $6,000 swing on their own.
- Existing base condition. If the old slab sits on stable, well-compacted subgrade, we build on it. If the clay underneath has pumped or settled – common on lots in the 75068 corridor after a wet spring – we re-engineer the base, and that adds cost before a paver is laid.
- Paver grade and pattern. Premium tumbled pavers and intricate herringbone cuts cost more in material and labor than standard running bond.
- Drainage and grading. A driveway that needs a channel drain or a regraded slope to move water away from the garage carries extra labor.
- Edge and border details. A soldier-course border, contrasting band, or curved edge all add cutting time.
Your written estimate is line-item: demo, base prep, pavers, edge restraint, joint sand, and cleanup, each with a number. What’s typically not in the base price: unforeseen subgrade repair, extra drainage, and HOA submittal work if the review board requests drawings. We flag those up front so there are no surprise change orders. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Paloma Creek South Homes Specifically Do to This Job
Paloma Creek South is a master-planned, build-out community in the 75068 corridor along US 380 in Denton County, and almost all of it went up within the last two decades. That changes how a paver driveway job runs here. You’re rarely fighting failing old construction; you’re upgrading builder-grade concrete on homes barely a decade old, sometimes not at all. The bigger constraint is the developer-era HOA architectural review and setback rules – on these tight master-planned lots, the HOA often decides what you can build before the city permit even comes into play. Exterior changes route through the association, and for a driveway that can mean width, edge finish, or color palettes that need a submittal and approval. We handle the review paperwork and match the approved spec so your project doesn’t get flagged mid-build.
The clay soil is the other local reality. It swells and shrinks seasonally, and a driveway resting on an under-compacted base will heave and settle within a few years. That’s why we always re-engineer the base on Paloma Creek South lots rather than trusting what came with the house. If the driveway project follows an addition or a new front entry, homeowners often pair that with Door Installation in Paloma Creek South so the curb appeal reads as one finished job.
Serving Paloma Creek South, TX – Our Local Coverage Area
We serve Paloma Creek South and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Paloma Creek South

Most paver driveways in Paloma Creek South take three to five working days from demo to final compaction. A single-car apron can wrap in three; a wide two-car driveway with a curve or turnaround runs the full five. Weather and HOA review timing are the two things that can push the schedule.
Driveway replacement or reconfiguration in Paloma Creek South may require a permit and inspection, depending on scope and whether you’re changing the footprint. The HOA architectural review is often the bigger gate on these master-planned lots. We pull permits, handle the inspection, and manage the HOA submittal so you don’t chase paperwork.
No – not when the existing concrete is failing or sitting on a soft base, which is common on Paloma Creek South clay. We demo the old slab, re-compact the subgrade, and rebuild the base before setting pavers. Skipping that step is why some driveways settle within a few seasons.
Paver driveways in Paloma Creek South run $7,000 – $18,000, with most two-car driveways landing mid-range. Size, base condition, paver grade, and drainage work are the biggest variables. Call (844) 560-4467 for an exact quote – estimates are free and in writing.
Every paver driveway we install in Paloma Creek South is covered by our 730-Day Done Right Promise – if something isn’t done right, we make it right. That covers workmanship, not owner abuse. We hand over a written care sheet with the job.
Get Your Paver Driveway Estimate in Paloma Creek South
Call (844) 560-4467 for a free on-site estimate on paver driveways in Paloma Creek South. We’ll measure the footprint, expose and check the base, confirm your HOA’s approved palette, and hand you a written line-item price. A live person answers, day or night, and the number in the estimate is the number you pay. Our Driveway & Pavers service covers the full scope, and you can see everything we do across Paloma Creek South here.
Written by the team at Groundwork Construction Co.












