







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Quick note on the brief: the editorial spine listed carriage-house doors and smart openers, which belongs to a garage-door page, not concrete. I’ve built the page around Prosper’s actual concrete reality (expansive blackland clay, first-generation slab lots) since staying on-niche is a ranking rule here.
Concrete Driveways & Concrete Work in Prosper, TX: What It Really Costs and How It’s Poured
Concrete driveways and concrete work in Prosper, TX typically run $4,500 to $12,000 for a new driveway, with replacement in the $5,000 to $14,000 range. A standard pour takes 4 to 7 days from demo to cure, and our technicians have up to 12 years of experience on flatwork across North Texas clay. Call (844) 560-4467 for a free on-site estimate with a written, line-item quote.
How we pour a driveway in Prosper, step by step

Concrete flatwork looks simple from the curb. It isn’t. On Prosper’s converted pasture lots, the ground under your future driveway has been farmed for generations and graded by a production builder chasing a fast close, so the prep stage is where the money and the risk both live.
Stage 1: Site review and layout (day 1, about 2 hours)
We walk the lot with you and flag what the builder left behind: drainage swales that point toward the slab, utility stubs, and any grade that already sheds toward the house. You decide the apron width, the flare at the street, and whether to tie into an existing walk or start fresh. This is also where we confirm whether your subdivision plat or HOA restricts apron style and finish color.
Stage 2: Demo and excavation (day 1 to 2, 4 to 8 hours)
Old concrete comes out and goes to a recycler. We excavate to a minimum of 4 inches for a standard residential pour, more where a heavy truck or RV will park. On most Prosper lots we’re cutting into dense blackland clay that’s been compacted by construction traffic, so the subgrade has to be reworked rather than just scraped.
Stage 3: Base, compaction, and form (day 2 to 3)
We bring in a compacted select fill base, typically 4 to 6 inches, and compact it in lifts. Forms go up, and you confirm the final elevation at the garage apron and the street tie-in. This is the stage where a sloppy crew starts sloping water into your garage. We check fall with a level, not by eye.
Stage 4: Steel, pour, and finish (day 3 to 4)
We set rebar or welded wire mesh on chairs so it sits in the middle of the slab, not on the dirt. Then the pour, screeded, floated, and finished in the texture you picked at the layout walk. Control joints are cut within 24 hours while the concrete is still green, which is what keeps the cracks where we put them.
Stage 5: Cure and inspection (day 4 to 7)
We keep traffic off for at least 72 hours and full vehicle weight off for 7 days. If the job needs a city inspection or a final HOA walk, we schedule it here. You get the mix design ticket and a walkthrough before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’re actually choosing between
Concrete isn’t one product. These are the real forks in the road, and each one moves the price and the lifespan:
- Standard broom finish vs. exposed aggregate. Broom finish is the budget choice and the most slip-resistant in North Texas rain. Exposed aggregate costs more and looks richer, but the rough surface holds Prosper’s blackland dust, so it needs periodic cleaning.
- 4-inch slab vs. 5 to 6-inch slab. A 4-inch pour handles foot traffic and a sedan. If an F-250, boat trailer, or RV parks on it, go thicker with heavier steel. The upgrade is a modest line item and it prevents the spider cracking we see on undersized slabs.
- Plain gray vs. integral color or a stamped border. Standard gray is the default on most Prosper streets. Colored concrete and a stamped border are common upgrades in the higher-end subdivisions, but they fade slower than a topical stain and cost more upfront.
- Rebar vs. welded wire mesh. Mesh is cheaper and adequate for light residential use. Rebar is the choice on clay soil that moves, which is nearly every lot in Prosper.
- Control joints and sealer. A penetrating sealer applied after cure slows water absorption and freeze-thaw damage. It’s an inexpensive add-on that most builders skip.
If your project is wider than a driveway – a full front-yard hardscape, patio, or walkway – that’s part of a full Driveway & Pavers in Prosper scope, and we’ll price it in the same written estimate so you can see the whole number at once.
What Concrete Driveways & Concrete Work costs in Prosper, TX

Expect $4,500 to $12,000 for a new concrete driveway in Prosper, with most single-family jobs landing in the $6,000 to $9,000 band. Replacement where concrete has to come out runs $5,000 to $14,000. The four variables below are what push a quote toward one end or the other.
- Square footage. A typical Prosper driveway runs 500 to 800 square feet. Every hundred square feet adds roughly $800 to $1,400.
- Existing condition and demo. Saw-cutting, hauling off old concrete, and reworking failed subgrade can add $1,500 to $3,000 to a job that would otherwise be a straightforward pour.
- Base and soil. Where blackland clay needs deeper over-excavation and select fill, the base work climbs. This is the single most common reason a Prosper quote lands at the high end.
- Finish and reinforcement. Exposed aggregate, color, or a heavy rebar mat are upgrades on top of the base number. A structural slab for a detached garage pad costs more than a driveway of the same size.
Your written estimate lists demo, excavation, base, steel, the mix design, finish, and joint work as separate lines. What isn’t always included: relocating irrigation or a gas stub, extending a downspout, and any HOA architectural review fee. We flag those before the pour, never after. Prices are fixed – the number you sign is the number you pay – and 0% financing for 18 months is available, with $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Prosper homes specifically do to this job
Prosper’s housing stock is overwhelmingly new – large single-family homes platted in the 2010s and 2020s, carved out of farmland along US 380 and Preston Road. That changes the work. We’re rarely replacing a 30-year-old driveway. We’re usually correcting a builder-grade pour, or putting in the driveway, RV pad, or shop slab on a lot that was pasture three years ago.
The ground is the story. North Texas blackland prairie clay expands when it’s wet and shrinks hard in our dry summers, and Prosper lots have no mature trees or established drainage to buffer it. That shows up as cracked slabs, heaving at the apron, and water that pools against the garage instead of running to the street. We see it constantly in the newer subdivisions off Preston Road and First Street as homes settle into their first few wet-and-dry cycles. If you’ve got a drainage or grading problem, it’s worth mentioning when we estimate, because it affects the base we build.
The other Prosper reality is inspection. Concrete flatwork near a foundation or over utilities often needs a permit, and a lot of the HOA communities here have architectural rules on apron finish, color, and even width. We handle the permit and reads the plat, so you’re not the one fielding a rejection letter mid-pour. The work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Serving Prosper, TX – Our Local Coverage Area
We serve Prosper and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Prosper

A standard concrete driveway in Prosper takes 4 to 7 days from demo to cure, with 3 to 4 days of active work and 3 to 4 days of hands-off curing. Weather, permit turnaround, and whether old concrete has to come out all affect the schedule. Call (844) 560-4467 for a firm timeline on your lot.
Often yes – flatwork tied to a foundation, over utilities, or part of a larger addition typically requires a permit and an inspection. We pull the permit and schedule the inspection, so you’re not chasing the city. Call (844) 560-4467 and we’ll tell you what your specific job needs.
Sometimes. An overlay can work if the existing slab is sound, well-drained, and only lightly cracked. If the base has failed, an overlay just cracks through – on Prosper clay that’s the usual outcome. We won’t oversell a cheap fix that won’t hold. Call (844) 560-4467 for an honest look.
Replacement runs $5,000 to $14,000, with a straightforward tear-out and re-pour often landing under $9,000. Deep base problems and clay over-excavation push it higher. Call (844) 560-4467 for a free written quote – estimates are free.
Every concrete job is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years on workmanship. The mix design and joint layout are documented in your file. Call (844) 560-4467 to talk through the coverage on your project.
Get a free concrete estimate in Prosper
If your driveway, RV pad, or shop slab in Prosper needs a real number, call (844) 560-4467. We answer with a live person, 24/7, and a technician walks the lot, checks the grade and base, and hands you a written line-item estimate before we leave. Estimates are free. If the project is wider than a driveway, we’ll fold it into one scope – homeowners often pair this with ADU Site Prep & Utilities in Prosper or a Door Installation in Prosper while we’re on site. You can see the full Driveway & Pavers service and everything we cover on our Prosper page.
Written by the team at Groundwork Construction Co.












