







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Frisco, TX: What It Takes and What It Costs
Concrete driveways and concrete work in Frisco, TX typically run $4,500 – $12,000 for a new driveway pour, with most single-family jobs finished in 3 to 5 working days from demo to first drive-on. That window covers excavation, subgrade prep, steel and forms, the pour itself, and the 48 to 72 hours of cure time before you park on it. Frisco’s clay soils and slab-on-grade foundation culture make subgrade prep the part that decides whether the slab holds, and getting it wrong is expensive. Call (844) 560-4467 for a free on-site estimate before you commit to a number.
How We Pour a Concrete Driveway in Frisco, Start to Finish

Every driveway follows the same five stages, and each one has a decision point where you sign off before we move forward.
Day 1: Layout and demolition
We mark the driveway footprint against your garage and the curb, then cut and haul out the old surface if there’s one to remove. On a typical Frisco lot that’s 400 to 600 square feet of demo, about half a day with a crew and a dumpster. You confirm the final width here, and we’ll flag whether your existing approach apron needs cutting back to match.
Day 1 – 2: Excavation and subgrade prep
This is the stage that separates a 30-year slab from a 12-year one. We excavate 6 to 8 inches, then compact the subgrade in lifts and bring in select fill where the clay is unstable. On the blackland clay common across Frisco, an untreated subgrade moves with every wet-dry cycle. You’ll approve the base thickness and whether we add a compacted aggregate base under the slab.
Day 2 – 3: Forms, steel, and the pre-pour walk
We set forms to final grade with the right slope away from the garage, place rebar or welded wire mesh on chairs, and install expansion joints where the driveway meets the slab and the sidewalk. The pre-pour walk is your last chance to move a joint or change a width before concrete is placed. Skipping this step is how homeowners end up with a crack running straight through the middle of the apron.
Day 3: The pour and finish
A 4,000 to 4,500 PSI mix arrives, gets placed and screeded, then finished to the texture you picked. Broom finish is standard and the safest choice for North Texas; a smooth trowel finish looks great and turns slick in rain. Control joints are cut within hours of the pour, not the next day, or you get shrinkage cracks instead of intentional ones.
Day 4 – 5: Cure and cleanup
We keep the slab moist and covered for 48 to 72 hours, then strip forms and clean the site. Light foot traffic in 24 hours, vehicles at 7 days. Cold or wet weather pushes the schedule, which is why we don’t quote a firm pour day until we’ve seen the subgrade. Call (844) 560-4467 with questions at any stage; you’ll reach a live person.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Concrete Work in Frisco
Most of the decision-making happens before day one, and these are the choices that actually change how the driveway performs.
- Standard 4-inch slab vs. 5 to 6-inch reinforced slab. The heavier slab costs more per square foot but resists cracking far better on Frisco’s expansive clay. If you park a heavy truck or an RV, this is the upgrade worth paying for.
- Rebar vs. welded wire mesh. Rebar on chairs gives real structural reinforcement; mesh sits lower and adds less load capacity but costs less. Both are code-acceptable; they are not equal in a slab exposed to soil movement.
- Plain gray vs. integral color vs. exposed aggregate. Plain gray runs lowest; integral color adds a modest premium and holds up well if it’s mixed in, not surface-applied. Exposed aggregate brings texture and slip resistance but costs more and is harder to patch cleanly later.
- Joint pattern. Standard square panels, or a narrower pattern to control where cracks appear. More joints mean more looks, more sealing, and a slightly higher cost.
- Drainage and grade. Some Frisco lots need a channel drain or a swale to keep water away from the house and the garage slab. That’s a scope decision you make early, not after the pour.
If the driveway is one part of a bigger exterior project, it lives under our Driveway & Pavers work and often ties into a full Driveway & Pavers in Frisco plan covering the approach, walkways and patio at the same time.
What Concrete Driveways & Concrete Work Costs in Frisco, TX

A new concrete driveway in Frisco runs $4,500 – $12,000, and a full replacement sits in the $5,000 – $14,000 range. Here’s what pushes a job toward the low or high end.
| Line item | Frisco range |
|---|---|
| New concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (demo + pour) | $5,000 – $14,000 |
Five variables move the number:
- Square footage. A single-car approach and a three-car apron are different jobs; size is the biggest lever.
- Existing condition. Demo of an old slab, hauling, and repairing a broken subgrade add cost.
- Subgrade work. Unstable clay that needs over-excavation or select fill pushes the job up.
- Reinforcement and thickness. Heavier rebar, a thicker slab, and a compacted base are real line items.
- Drainage and curb. Channel drains, swales, and cutting back the approach apron add scope.
Our written line-item quote shows exactly what’s included: excavation, base, reinforcement, the pour, joints, and cleanup, plus any drains or grading. What typically sits outside the number is landscape repair after demo and any HOA-required landscaping, which we flag up front. Every project is covered by our 730-Day Done Right Promise. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Frisco Homes Specifically Do to a Concrete Job
Frisco is one of the fastest-growing large cities in the country, and almost all of its housing went up after 1990. That changes the work. Nearly every driveway we touch sits on post-2000 slab-on-grade construction in a developer-built, HOA-heavy, master-planned subdivision, which means two things: your driveway, apron, and sidewalk were poured at the same time and often reach their first failure in the same window, and your HOA may have opinions about width, finish, and color before a single form goes down. We check those requirements before the pre-pour walk.
The real local driver is soil. North Texas blackland clay expands and contracts hard with wet-dry cycles, so a driveway poured over an unengineered subgrade can crack its first winter. Across the remaining build-out in ZIPs 75033, 75034 and 75035, we see the same pattern in newer subdivisions near the Dallas North Tollway and The Star: driveways set too low against a slab that’s still settling. Getting the base and drainage right the first time saves you a replacement in a decade. We cover all of Frisco through Frisco service, and homeowners often pair this with ADU Site Prep & Utilities in Frisco when a garage conversion or addition adds new parking, or with Door Installation in Frisco once the approach is settled.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Frisco

A typical concrete driveway in Frisco takes 3 to 5 working days from demo to cleanup, with 7 days before you drive on it. Weather and cure time set the real timeline, and we never promise a pour day before we’ve inspected the subgrade.
Most standard driveway replacements don’t need a separate permit, but new approaches, curb cuts, and drainage work often do. We check what applies to your lot and pull the permits that are required, and the estimate states clearly what’s covered. Call (844) 560-4467 and we’ll walk through your address.
Oftentimes yes, with the right finish, width and color. Frisco’s subdivisions are largely master-planned and HOA-governed, so we review those rules with you before the pre-pour walk rather than after the pour. Better to settle the finish and width first than to rebuild.
Concrete typically runs $4,500 – $12,000 for a new driveway, and a full replacement $5,000 – $14,000. Pavers cost more upfront but are repairable; asphalt is cheapest but needs resealing and has a shorter life on Frisco’s clay. Concrete is usually the best balance of cost and durability here.
Not for the scope in your written quote. If we hit a subgrade problem that wasn’t visible before excavation, we stop and show you the fix and the cost before we touch it. The 730-Day Done Right Promise backs the workmanship in writing.
Get a Free Estimate for Concrete Driveways & Concrete Work in Frisco
Call (844) 560-4467 to schedule a free on-site estimate for concrete driveways and concrete work in Frisco. We’ll walk your lot, check grade and drainage, confirm any HOA rules, and hand you a written line-item quote with upfront pricing. A live person answers 24/7, so you’re not waiting until Monday. Background-checked, uniformed technicians, and every project backed by the 730-Day Done Right Promise. Your exact number in one visit, no pressure.
Written by the team at Groundwork Construction Co.












