







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Farmers Branch, TX: What the Job Actually Involves
New cabinets and countertops in Farmers Branch typically run $14,000 – $45,000 for a full kitchen’s worth, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Plan on five to eight weeks from template to final caulk line, and understand upfront that the cabinet install is the clock everything else runs on. Countertops can’t be templated until the boxes are set and level. Call (844) 560-4467 and we’ll walk your kitchen and give you a written line-item number before anyone touches a drawer pull.
How We Sequence a Cabinet and Countertop Job

Every stage below has a decision attached to it. Knowing which one is yours and when keeps the schedule honest.
Stage 1: Measure, template, and lock the layout (day 1, about 2 hours)
We measure the room wall to wall, check for out-of-square corners and floor dips, and confirm appliance sizes. You decide the cabinet line and door style here, because lead times swing wildly between stock, semi-custom, and full custom. Stock cabinets can land in 1 – 2 weeks; custom runs 8 – 12 weeks. That single choice moves your whole calendar.
Stage 2: Demolition and prep (days 2 – 3)
Old cabinets and counters come out, and we open the wall to see what’s behind them. This is where surprises live in older homes: a shutoff that won’t close, a junction box buried behind a cabinet back. You approve any added electrical or plumbing work before we proceed. We protect floors and seal off the work zone the same day.
Stage 3: Cabinet installation (days 4 – 5)
Boxes get set, shimmed level, and screwed into studs, not just drywall. Crown, filler strips, and toe kick go on after the uppers are hung. You confirm hardware placement now, before the drill bit moves. Good installers spend real time on level and plumb here because every counter and door gap downstream depends on it.
Stage 4: Countertop template and fabrication (days 6 – 15)
Once the base cabinets are set, a technician templates the actual installed boxes with a laser or physical jig. Fabrication takes 5 – 10 business days for quartz and granite. You pick the slab edge profile and sink cutout location at template time, not later.
Stage 5: Counter install, sink, and final trim (days 16 – 18)
Slabs set, seams are epoxied and color-matched, the sink and faucet go in, and we caulk the backsplash line. Final walkthrough covers door alignment, drawer glide tension, and a punch list you sign off on. Anything on that list gets fixed under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
These are the real forks in the road, with the trade-off attached to each.
- Stock vs. semi-custom vs. custom cabinets. Stock is the fastest and cheapest, with fixed sizes and limited finishes. Semi-custom adjusts widths in 3-inch increments and opens the door style list. Custom matches any dimension and finish but costs the most and takes the longest. Most Farmers Branch kitchens land on semi-custom.
- Quartz vs. granite vs. butcher block. Quartz is non-porous and needs no sealing, which suits a busy household. Granite is natural stone, heat-tolerant, and every slab is unique, but it needs resealing roughly once a year. Butcher block is warm and repairable but wants oiling and doesn’t love a wet sink area.
- Overlay construction. Full-overlay doors hide most of the frame and read as modern. Inset doors sit flush inside the frame and cost noticeably more for the precision they demand.
- Sink and faucet configuration. Undermount sinks pair cleanly with solid surface but require the fabricator to cut and polish the opening. Drop-in sinks are simpler and forgiving.
- Brand partners where they matter. KraftMaid and Cambria are the two names we lean on most for cabinetry and quartz, because both hold their finish and warranty terms well. The rest of the list is your call.
What Cabinets & Countertops Cost in Farmers Branch, TX

Expect $14,000 – $45,000 for the full kitchen package. Here’s how the line items break down:
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
| Small kitchen remodel (cabinets + counters only) | $9,000 – $20,000 |
Five things push a Farmers Branch job to the top of that range: kitchen square footage, how much of the old casework gets reused, whether plumbing or electrical has to move, the material grade you pick, and whether the scope pulls a permit. A drop-in replacement with stock cabinets on the same footprint sits near the bottom. A gut rebuild with a relocated sink and custom inset doors sits at the top.
A written estimate from us lists cabinets, counters, labor, demo, disposal, and any allowance line separately. What it typically doesn’t cover unless you ask: appliance hookups, new flooring under the cabinets, and drywall repair beyond the work zone. We flag those before the number goes in writing, not after. Every project over $10,000 gets $1,000 off, and we offer 0% financing for 18 months.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Homes Specifically Do to This Job
Farmers Branch is a built-out inner-ring Dallas suburb, and 75234 is almost entirely infill and redevelopment now. Teardowns of 1950s-60s ranch homes get replaced with larger custom builds on the same lots, so we’re working in tight, fully occupied residential blocks. Driveway access for a slab delivery, staging space for the cabinet truck, and keeping the neighbors’ Tuesday quiet all matter more here than raw lot size. Because the city’s stock runs to single-story brick ranches on slab with original cast-iron plumbing, opening a wall often surfaces a drain line that’s older than the homeowner expected. We plan for that.
North Texas heat and expansive clay soil move foundations, and a slab that’s shifted a half-inch shows up as a counter that won’t sit flat and cabinet doors that misalign. In Farmers Branch, we check for floor level before quoting cabinet heights, because a leveling shim job can add cost. If your cabinet and counter project is part of a larger Kitchen Remodeling in Farmers Branch scope, that’s a conversation we’re glad to have; for just the casework and counters, our Kitchen Remodeling team carries it from first template to final trim across Farmers Branch. Some homeowners pair a new kitchen with a Garage Conversion ADU in Farmers Branch or plan it alongside a New Detached ADU in Farmers Branch, and doing the casework first keeps the timeline clean.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Farmers Branch

Five to eight weeks from demo to final trim. The cabinet line you choose drives most of it, since custom cabinets add 6 – 10 weeks of lead time over stock. Call (844) 560-4467 for a schedule estimate on your kitchen.
Like-for-like replacement usually doesn’t require one. If the job moves plumbing, electrical, or walls, it does, and the scope triggers an inspection. We pull the permits and pass the inspections on any project where they apply – you don’t chase the paperwork.
Yes, in most kitchens, if the sink stays put. Keeping the sink in the same spot means the drain and supply lines don’t move, and the job stays simpler and cheaper. Relocating the sink means re-plumbing under the floor or through a wall and a bigger line item.
The full kitchen package runs $14,000 – $45,000, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500. Size, material grade, and whether utilities move are what drive the number. Call (844) 560-4467 for an exact quote – estimates are free.
Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers labor and workmanship for two years. Manufacturer warranties on KraftMaid cabinets and Cambria counters run on top of it.
Get a Free Cabinets & Countertops Estimate in Farmers Branch
Call (844) 560-4467 to schedule a free on-site estimate. A real person answers the phone around the clock, and we’ll bring samples, measure your kitchen, and hand you a written line-item number with no change-order games. Our technicians arrive background-checked and in uniform, and they’ve done this in tight Farmers Branch blocks before. Bring your questions; we’ll bring the tape.
Written by the team at Groundwork Construction Co.












