







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Highland Park: What It Costs and How It’s Done
Concrete driveway installation in Highland Park runs $4,500 to $12,000 for most residential jobs, with a full replacement at $5,000 to $14,000 when the old slab has to come out. A standard pour is a two- to four-day sequence: demo and grading on day one, forms and steel on day two, pour on day three, then a cure window before you park on it. Call (844) 560-4467 for a free on-site estimate and a written line-item quote before anything is torn up.
How we run a concrete job, stage by stage

Concrete work is unforgiving. You get one shot at the slab, so the prep gets more time than the pour. Here’s the real sequence and where you make decisions.
Stage 1: Site visit and layout (day one, 60 to 90 minutes)
We walk the drive, check the existing slab for what’s under it, confirm grades and drainage, and measure the apron at the street. Highland Park lots are tight and heavily treed, so this is also where we look at root zones and where equipment can sit without blocking the alley or a neighbor’s drive. You decide the layout and the width at the end of this visit, because widening a driveway changes the impervious-cover math the town cares about.
Stage 2: Permits and design review (one to four weeks, before any demo)
This is the stage homeowners underestimate. Highland Park runs its own building inspection department, separate from Dallas, and exterior work on a century-old house can trigger design review. We handle the submittal and the inspections. You sign what needs signing. If a protected tree sits near the work, we schedule the arborist evaluation here, not after the excavator shows up.
Stage 3: Demolition and base prep (day one to two on site)
Old concrete comes out, and so does whatever bad base is under it. That matters here: black-clay soil moves with every wet-dry cycle, and a slab poured over an uncompacted base will crack within a season. We excavate to depth, compact the subgrade in lifts, and bring in select fill. Then forms go up and #3 or #4 rebar goes in on a grid, chaired off the ground so it ends up in the middle of the slab, not lying on the dirt.
Stage 4: The pour and finish (day three)
We pour in the morning when it’s cooler, screed, float, and cut control joints at the right spacing so cracks land where they should. You pick the finish before this day, not on it. Broom finish is the default for a drive; exposed aggregate and stamped patterns cost more and need more attention. We also confirm the slope away from the garage at this point, because a drive that drains toward the door is a problem you’ll live with for twenty years.
Stage 5: Cure and final walk (days four through seven)
Concrete keeps gaining strength for weeks. You can walk on it in 24 to 48 hours and drive on it in about seven, depending on weather. We come back for the final walk, check joints and edges, and hand over the written workmanship guarantee. Most jobs are fully done in a week to ten days once the permit is in hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Concrete isn’t one product. These are the decisions that shape both the look and the number:
- Plain broom finish vs. exposed aggregate: Broom is the workhorse, best grip, lowest cost, and hides tire marks well. Exposed aggregate shows the stone and looks richer but costs meaningfully more and is harder to patch later.
- Standard gray vs. integral color: Integral color goes through the whole slab, so a chip doesn’t show a gray scar. It adds cost and it’s not a fix for poor finishing.
- 4-inch vs. 5- to 6-inch slab thickness: A standard residential drive is 4 inches over a good base. If you park a heavy truck or an RV, go thicker. This is the single biggest driver of material cost.
- Rebar vs. mesh: We use rebar on drives. Mesh is cheaper and it’s fine for a walkway, but it doesn’t hold a drive together over clay the way steel bar does.
- Joints and layout: Control joints cut at the right spacing keep shrinkage cracks controlled. Skip them and you get random cracks that look like failures.
- Edging and borders: A border in Belgard or Techo-Bloc pavers can tie a new drive to an existing walk or patio. It’s a finish choice, not a structural one, and we price it separately.
What Concrete Driveways & Concrete Work costs in Highland Park, TX

Most Highland Park concrete driveway projects land between $4,500 and $12,000. A full tear-out and replacement runs $5,000 to $14,000. Five things push a job toward the high end:
- Square footage and thickness. A long drive to a rear garage costs more than a short front pad. Thicker slabs use more concrete.
- What’s under the old slab. Rotten base, roots, or a failed prior pour means more excavation and more fill hauled in.
- Drainage corrections. Adding a channel drain or regrading to move water off the drive is real work, and it’s the work that protects your foundation.
- Access. Tight lots and mature trees mean smaller equipment and slower going, which shows up in labor.
- Permit and review scope. Design review or tree-protection review adds time and fees before a shovel moves.
A written estimate from us lists demo, haul-off, base prep, steel, concrete, finishing, and cleanup as separate lines. It does not include landscaping repair around the edges or moving a fence, and we’ll tell you that up front. The number you see is the number you pay. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park homes specifically do to this job
Almost every concrete job here is attached to a house built between the 1910s and 1930s, and that changes the work. You’re pouring next to pier-and-beam foundations that have already moved with the clay, and the new slab has to be graded so runoff goes to the street, not under the house. Mature live oaks overhang most drives on streets like Beverly and Lexington, and the town’s tree-protection rules mean a root zone can stop a layout cold until an arborist signs off. Because Highland Park has its own inspection department, every pour gets inspected on its own timeline, and a drive that ties into an addition or a garage conversion often shares a permit review with that scope. This is also why we look at the whole exterior when a drive is failing: a cracked apron and a settling walk are usually the same clay problem. If your project grows into a wider hardscape scope, it’s part of a full Driveway & Pavers in Highland Park plan, and homeowners often pair this with ADU Site Prep & Utilities in Highland Park when a new slab serves a rear structure, or with Door Installation in Highland Park when the garage door and opener are being replaced at the same time. We cover the whole town, and you can see the full scope of our Driveway & Pavers work or check our Highland Park service page.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Concrete Driveways & Concrete Work in Highland Park

A typical concrete driveway in Highland Park takes one to two weeks from demo to final walk, with the pour itself on day three and about seven days of cure before you drive on it. Permit and design review can add one to four weeks before work starts. Call (844) 560-4467 for a timeline specific to your lot.
Yes. Highland Park requires permits for driveway and exterior concrete work, and the town runs its own inspection department separate from Dallas. We pull the permits and handle the inspections so the work passes the first time. Call (844) 560-4467 and we’ll walk you through what your project needs.
In most cases yes. We work around established plantings and keep the new slab graded away from the house, and we don’t disturb the pier-and-beam foundation. Trees inside a protected root zone are the real constraint, not the house. Call (844) 560-4467 to schedule a free site visit.
Concrete driveway installation in Highland Park runs $4,500 to $12,000, and a full replacement is $5,000 to $14,000 depending on size, base condition, drainage, and site access. You get a written line-item quote before any work starts. Call (844) 560-4467 for an exact number; estimates are free.
All our concrete work is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, in writing. That covers workmanship, not damage from a tree root or a vehicle. Call (844) 560-4467 with questions about coverage on your project.
Get a free concrete estimate in Highland Park
We’ll come out, look at the existing slab and the grades, and give you a written line-item estimate for concrete driveways & concrete work in Highland Park at no cost. On the call, we ask about the size of the drive, what’s failing, and whether trees or drainage are involved, then book a site visit. Live person, 24/7, at (844) 560-4467. Upfront pricing, no surprises, and a guarantee that holds for two years after the last truck leaves.
Written by the team at Groundwork Construction Co.












