







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Lewisville: What the Job Actually Involves
Cabinets & countertops in Lewisville typically run $14,000 – $45,000, and the work itself takes two to four weeks from demolition to final caulk. You’re replacing the boxes and the surfaces, tying the new layout back to existing plumbing and electrical, and getting the room back to working order. Call (844) 560-4467 for a free on-site estimate and a written line-item quote before anything gets ordered.
How a Cabinet and Countertop Job Moves, Stage by Stage

The sequence matters more than most homeowners expect, because cabinets and counters are two trades that have to hand off cleanly. Here’s the order we work in, and what you decide at each point.
- Stage 1 – Measure and template (day 1, about 2 hours). We take field measurements, confirm appliance sizes, and check that walls are plumb enough for standard boxes. You pick door style, finish, and counter material here, because those drive the order lead time. This is also where we flag anything that needs a permit, like moving a sink line or a gas range valve.
- Stage 2 – Demolition and prep (days 2 – 3). Old cabinets and counters come out, and we open the wall to inspect what’s behind them. Aging Lewisville homes regularly hide galvanized supply lines and undersized circuits. You’ll get a call before we touch anything beyond the scope, so there’s no surprise line on the invoice.
- Stage 3 – Cabinet install (days 3 – 7). Base and wall cabinets get set, shimmed, and leveled, then screwed into studs. The counter templater comes after the boxes are in, not before, because a template taken over old cabinets will miss by a quarter inch and that’s a callback.
- Stage 4 – Counter fabrication and set (10 – 14 days of lead time, then a half day). Stone counters are cut off a digital template. You pick the edge profile and the sink cutout here. Fabrication is the long pole in this job; the schedule lives or dies on when you approve the slab.
- Stage 5 – Sink, faucet, and punch list (days 15 – 20). The plumber sets the sink and Moen or Kohler faucet, we reinstall appliances, and we walk the room with you. Most punch items get closed the same day.
One rule we hold to: no counter template gets taken until the cabinets are anchored. Skipping that step is how you end up with a seam that won’t close and a two-week delay waiting for a remade top.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Be Making
Most of the decisions come down to three things: how the boxes are built, what the surface is made of, and how far the job reaches into plumbing and electrical. Here’s the honest trade-off on each.
- Cabinet construction – stock, semi-custom, or custom. Stock is the fastest and the least expensive, but you’re limited to standard widths. Semi-custom lets you adjust depth and height for a real kitchen and usually adds 10 – 20% to the cabinet line. Full custom is worth it only when the room has an odd shape or a specific look you can’t get otherwise.
- Box material – plywood or particleboard. Plywood sides hold up better to moisture near a sink, and the price gap has narrowed. Particleboard is fine in dry zones and keeps the cost down.
- Door front – painted MDF, thermofoil, or wood veneer. Painted MDF is the most paintable and the easiest to touch up. Thermofoil is durable but can peel at the edges over time in a hot kitchen. Veneer is the premium look but wants a gentler hand.
- Counter surface – quartz, granite, or butcher block. Quartz (Caesarstone and similar) is non-porous and forgiving; it’s the default pick for busy families. Granite is natural and heat-tolerant but needs sealing once a year or so. Butcher block is warm and inexpensive, and it wants oiling every few months.
- Sink and faucet – undermount with a solid faucet. An undermount sink with a Moen or Blanco faucet is the practical pairing. A drop-in sink is a cheaper install if you’re keeping the existing cutout.
What Cabinets & Countertops Costs in Lewisville, TX

For a standard Lewisville kitchen, expect $14,000 – $45,000 for the full job. The low end is a stock-cabinet, quartz-counter swap with the sink in the same spot. The high end is semi-custom boxes, a relocated sink or range, and stone with a shaped edge on a larger room.
Here’s what actually moves the number:
- Cabinet line and count. A 10-box stock run and a 25-box semi-custom run are different jobs; the boxes are usually the single biggest line item.
- Counter material and square footage. Quartz and granite cost more per square foot than butcher block, and the edge profile and cutouts add to the fabrication.
- Plumbing and electrical relocation. Moving a sink, a range valve, or a dishwasher circuit adds real labor and usually a permit. Keeping fixtures in place keeps the price down.
- Existing condition. Old Town and lakeside homes often need subfloor repair or wall framing straightened before new boxes go in. We budget for that in the written estimate rather than discovering it later.
- Permit scope. A straight cabinet swap typically needs no permit. Moving plumbing or gas does, and we pull it and pass the inspection as part of the job.
The written estimate lists each line: cabinets, counter, fabrication, install labor, plumbing, electrical, permit, and disposal. It doesn’t include appliance purchases, structural changes, or a full kitchen remodel – that’s a different scope, and if you’re considering it, our Kitchen Remodeling in Lewisville page lays out the wider project. Call (844) 560-4467 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Lewisville Homes Specifically Do to This Job
Lewisville is a two-speed market. In Old Town and the older core near the lake, we’re pulling 1960s – 1980s cabinets out of brick ranch and pier-and-beam homes where the boxes have been shimmed and re-shimmed for decades. In the newer subdivisions up north, the job is short: the boxes are square, the plumbing is in good shape, and the swap is straightforward.
The bigger issue is the ground under the kitchen. The black gumbo clay here heaves hard in drought-then-flood cycles, and that shows up as a slab that’s out of level. A cabinet run that’s straight in the air can still sit out of level on the floor, so we check the slab before we order anything. On older homes, we often find the slab has dropped a half inch or more, and the fix is a floor leveler under the new boxes, not a foundation job. That check is the single biggest reason we walk the room before quoting. If you’re also eyeing the garage, homeowners often pair this with a Garage Conversion ADU in Lewisville, since both trades share the same framing and finish crew. We cover the whole of Lewisville, from Old Town to the northern growth zones.
Serving Lewisville, TX – Our Local Coverage Area
We serve Lewisville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Lewisville

Most jobs run two to four weeks from demo to final walkthrough. The cabinets go in the first week. The counter templating and fabrication are the long pole, usually 10 – 14 days of lead time, so the schedule usually hinges on when you approve the slab. Call (844) 560-4467 to get a schedule based on your actual room.
A straight cabinet and counter swap typically needs no permit. Moving a sink, a gas range valve, or a dishwasher circuit does, and the work has to be inspected. We pull the permit and pass the inspection as part of the job, so you don’t have to chase it. Call (844) 560-4467 to talk through your scope.
Yes, and it’s the most common version of the job. Keeping the sink and range where they are holds the price at the low end of the $14,000 – $45,000 range and cuts a week off the schedule. Moving them is doable, it just adds plumbing, electrical, and a permit to the scope. Call (844) 560-4467 for a quote either way.
The full job runs $14,000 – $45,000 in Lewisville. Stock boxes with quartz tend to land near the bottom; semi-custom boxes, a relocated sink, and stone with a shaped edge push toward the top. The written estimate breaks out each line. Call (844) 560-4467 for an exact number – estimates are free.
Every cabinets & countertops job we do is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. The counter material also carries its manufacturer’s warranty, and we pass that paperwork to you at the walkthrough. Call (844) 560-4467 with any warranty question.
Get a Free Estimate on Cabinets & Countertops in Lewisville
Call (844) 560-4467 to schedule a free on-site estimate. A live person answers, any hour. We’ll walk the room, check the slab and the plumbing, and hand you a written line-item quote with no change-order surprises. If the job grows into a wider project, our Kitchen Remodeling service covers the rest, and homeowners often pair the work with a New Detached ADU in Lewisville. Call today and we’ll get you a number.
Written by the team at Groundwork Construction Co.












