







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in University Park, TX: What It Costs and How Long It Takes
A chain link fence in University Park, TX typically runs $3,500 to $9,000 installed, and most residential jobs finish in one to three days once the layout is set and utilities are marked. The number moves with linear footage, height, gauge, gate count, and how much demo and clearing the lot needs first. Call (844) 560-4467 for a free on-site estimate with a written line-item quote. You’ll know the footage, the gauge, and the gate hardware before anyone digs.
How a Chain Link Fence Goes In, Stage by Stage

Chain link is the most predictable fence we build, which is exactly why we don’t rush the front end of it. Here’s the real sequence, with the decisions that land on you and when.
Stage 1: Walk the line and mark utilities (about an hour, plus the 48-hour locate window). We walk the property with you, stake the corners, and confirm gate locations and swing direction. You decide where the drive gate lands and whether you want a walk gate near the side entry. Then we call for the utility locate. In University Park’s tight lots, knowing exactly where the gas and irrigation lines sit before a spade touches soil saves everyone a bad afternoon.
Stage 2: Demo and clearing (half a day to a full day). Old fencing comes out, posts get pulled, and brush and root mass get cleared along the line. If you’re replacing an existing fence, this is also when we haul it off. You decide whether the old concrete footings stay buried or get broken out; breaking them out adds time and cost but keeps the new line honest.
Stage 3: Layout and post setting (one day). We set terminal posts, corner posts, and gate posts in concrete, then stretch a line and check plumb. Line posts follow at consistent spacing. This is the stage that determines whether the fence stays tight for a decade. On North Texas blackland clay, we set posts deeper than a fair-weather install would call for, because that soil moves hard between wet and dry seasons.
Stage 4: Rails, mesh, and tension (half a day). Top rail goes up, mesh gets stretched and tied, and tension bars and bands are set. You decide on the finish: galvanized, vinyl-coated, or a specific color. This is the day the fence actually looks like a fence.
Stage 5: Gates and the walkthrough (a couple of hours). Gate frames get hung, latches and hinges adjusted, and we walk the whole run with you. You decide if you want a self-closing spring or a lockable latch on the gate. We tighten anything that needs it on the spot and leave you with the written workmanship guarantee.
Across all five stages, most residential chain link jobs land in one to three working days. A short run with no demo finishes in a day. A full perimeter with a double drive gate and old fence to remove can stretch to three.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Chain Link Fence
Chain link isn’t one product. The spec call you make now decides how it looks and holds up in ten years.
- Height: 4-foot for a garden boundary, 5-foot for a standard side yard, 6-foot for a taller privacy-leaning run. Cost climbs roughly 15 to 20 percent per step up in height because of more mesh and longer posts.
- Wire gauge and mesh size: 11.5-gauge is the light residential standard. 9-gauge is heavier and stiffer, and it’s what we recommend for anything a dog or a kid will lean on. 2-inch mesh is standard; 1-5/8 inch looks tighter and costs a little more.
- Finish: Galvanized steel is the budget choice and weathers to a dull gray. Vinyl-coated mesh in black or green costs more but holds color and reads less industrial. For homeowners who want the fence to disappear against a hedge line, black vinyl-coated is the common pick.
- Posts and rails: Line posts at 1-5/8 inch diameter, terminal posts at 2-3/8 inch. Top rail at 1-3/8 inch is standard. Heavier posts matter more on a windy ridge than people expect.
- Gates: Walk gates in single or double leaf, drive gates in single or double swing. Gate hardware is where cheap installs show their age first, so we spec heavier hinges and latches on anything wider than four feet.
- Top rail vs tension wire: A top rail gives the fence its shape and resists sagging. A tension wire at the bottom keeps mesh from curling. Both are worth having.
If a run of chain link is part of a larger boundary plan alongside wood or decorative fencing, our Fence Installation service covers the full scope and the transitions between materials.
Chain Link Fence Pricing in University Park, TX

Plan on $3,500 to $9,000 for a typical residential chain link fence in University Park. That range covers most side-yard and full-perimeter installations at standard heights with at least one gate. Here’s what pushes a job from the bottom of the range toward the top:
- Linear footage: The single biggest driver. A short boundary line costs far less than wrapping a full lot.
- Height and gauge: A 6-foot 9-gauge fence costs meaningfully more than a 4-foot 11.5-gauge run of the same length.
- Demo and clearing: Removing an old fence, root mass, or overgrown brush adds labor and hauling.
- Gates: A double drive gate with heavier hardware is a real line item, not a rounding error.
- Site access: On a narrow 50 to 60-foot lot with a mature pecan or live oak in the way, moving material and setting posts takes more hands and more time.
A written estimate from us lists footage, post spacing, wire gauge, gate size, and hardware, so the number you see is the number you pay. What’s typically not included: removing large stumps, relocating irrigation lines, or repairing the lawn after the fence line goes in. We flag those upfront if they apply, and we don’t add them later without asking.
See the difference
Before
After
Before
After
Before
AfterWhy University Park Lots Make This Job Its Own Thing
University Park is a landlocked, built-out enclave of roughly 23,000 people in ZIP 75225, and the housing stock tells you almost everything about how fencing work goes here. Original homes were 1920s to 1950s cottages, Tudor and Colonial revival houses, and small post-war ranches on narrow 50 to 60-foot lots. Today the dominant work is teardown-rebuilds and gut renovations, with new two-story homes built nearly lot-line to lot-line and rear garages fed off the alley. That tight framing changes the chain link job directly. There’s often very little staging room, a mature pecan or live oak sitting right where a corner post wants to go, and a tree ordinance that controls what gets cut and what gets protected. Utility locates matter more on a lot with an old sprinkler system and a gas line threading between two houses eight feet apart.
The soil underneath is North Texas blackland clay, which swells when it’s wet and shrinks hard when it’s dry. On a chain link fence, that means posts set shallow will heave and loosen within a couple of seasons. We set them deeper and pack them properly. Summer heat above 100°F also hardens that clay to something close to concrete, so timing the dig matters. And on streets like Beverly and Preston, scheduling around HPISD drop-off congestion is part of the job; we don’t want a truck blocking a school lane at 3:15 any more than your neighbor does.
If the chain link is going in alongside a bigger rebuild, homeowners often pair this with ADU Site Prep & Utilities in University Park, or with Door Installation in University Park when a new gate and entry are part of the same scope. And if you’re mapping the broader boundary plan, the Fence Installation in University Park page covers the full project scope.
Serving University Park, TX – Our Local Coverage Area
We serve University Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in University Park

Most residential chain link fence installations in University Park take one to three working days. A short run with no demolition typically finishes in a single day; a full perimeter with old fence removal, a double drive gate, and tree interference can stretch to three. The utility locate window adds about 48 hours before digging starts. Call (844) 560-4467 and we’ll give you a realistic timeline for your specific lot.
Fence permits in University Park depend on the city’s current fencing and lot-coverage rules, and on whether the fence sits on or near a protected tree’s root zone. The City of University Park administers its own permitting separate from surrounding municipalities, so what’s allowed here can differ from a neighboring city. We check the current requirements before we stake a line, and we’ll tell you plainly if your plan needs a permit. Call (844) 560-4467 for a free estimate and a straight answer on permits.
A chain link fence in University Park typically runs $3,500 to $9,000 installed. The low end covers a modest side-yard run at 4 or 5 feet with a single walk gate and no demo. The high end reflects a full perimeter at 6 feet with heavier 9-gauge mesh, a double drive gate, old fence removal, and tight access around mature trees. Call (844) 560-4467 for an exact quote; estimates are free.
No, not from us. Once we’ve walked the lot, marked utilities, and written the estimate, the price is set. The exceptions are things nobody could see before digging, like an unmarked irrigation main or a buried footing, and we stop and talk to you before any of that becomes a change. Upfront pricing with no surprises is the whole point. Call (844) 560-4467 to set up the walkthrough.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if something isn’t done right, we make it right. That covers workmanship, post setting, gate alignment, and hardware. Material warranties come from the manufacturers and we’ll walk you through what each one covers. Call (844) 560-4467 to schedule your free estimate.
Get a Free Chain Link Fence Estimate in University Park
Call (844) 560-4467 for a free on-site estimate on your chain link fence in University Park. A live person answers, day or night. We’ll walk the property with you, mark the line, confirm gate locations, and hand you a written line-item quote with the footage, gauge, gate sizes, and hardware spelled out. That’s the whole ask: a free estimate and a real number. Our technicians have up to 12 years of experience, and we cover University Park and the surrounding neighborhoods.
Written by the team at Groundwork Construction Co.












