







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Irving, TX: Cost, Timeline, and What the Job Actually Involves
A chain link fence in Irving typically runs $3,500 to $9,000 installed, depending on linear footage, height, gauge, and how much tear-out the old fence needs. Most residential jobs are finished in one to three days once materials land and any HOA or City of Irving approval clears. Call (844) 560-4467 for a free on-site estimate with a written line-item quote before anything gets ordered.
How a Chain Link Fence Goes In, Stage by Stage

We don’t hand you a date and disappear. Here’s the actual sequence, including the parts where you have to make a call.
Stage 1: Walk-through and layout (45 minutes to an hour)
We walk the property line with you, confirm where the fence sits relative to your plat and any easements, and flag the things that cost money later if nobody catches them now: an irrigation line running the property edge, a gas stub, a shared fence with a neighbor who may want to split cost. You decide fence height and whether the “good side” faces you or the neighbor.
Stage 2: Locates and removal (half a day to a full day)
Texas law requires calling 811 before anyone digs, and on Irving lots built in the 1950s and 60s you can hit old sprinkler pipe, cable, or a forgotten concrete footing within the first few post holes. While locates are pending, we pull the old fence. Removal of an existing chain link usually adds a half day; a rotted wood fence with concrete footings buried in clay can eat a full day on its own.
Stage 3: Post setting and the clay problem (one to two days)
Posts go in at 8-foot spacing, set in concrete. On Irving’s black-clay soil, we set deeper than the minimum and bell the concrete at the base, because this ground swells in spring and shrinks hard in August. A post set shallow in clay will heave and lean within a couple of seasons. This is the stage that decides whether your fence is still straight in five years.
Stage 4: Framing, fabric, and gates (one day)
Top rail, tension bands, and the chain link fabric itself. Gates get their own attention: hinges, latch, and a drop rod on double gates. You confirm gate swing direction and width here. A 4-foot pedestrian gate and a 12-foot double drive gate are the two most common calls.
Stage 5: Walkthrough and cleanup (an hour)
We tension the fabric, check every gate for sag, haul off the old material, and walk it with you before we call it done. If a post is off or a gate drags, that gets fixed then, not after you’ve stared at it for a month. If you’re also reworking the property line with hardscape or an outbuilding, many homeowners pair this with ADU Site Prep & Utilities in Irving so the utility trenching and fence layout get coordinated once instead of twice.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Chain Link Options: What You’re Actually Choosing Between
Chain link isn’t one product. These are the real forks in the road, and what each one costs you in money or longevity.
- Gauge of wire. Standard residential fabric is 11.5-gauge; heavier 9-gauge lasts noticeably longer and shrugs off a dog leaning on it, but adds roughly 15 to 25 percent to the fabric cost. For a fence you plan to keep 15-plus years, 9-gauge is the honest choice.
- Height. 4-foot is the budget standard for a side-yard run. 5-foot and 6-foot are common where privacy or a pool barrier is the point. Each step up adds material and a taller post section.
- Coating. Galvanized is the cheapest and fine in dry stretches, but Irving’s spring storms and humidity push most buyers to vinyl-coated chain link. The coating adds a few hundred dollars and buys years of rust resistance. Black or green coated also reads less like a chain link fence and more like a deliberate boundary.
- Top rail and posts. A top rail that’s too light will sag over a long run. We spec a heavier rail on runs past 100 feet. Terminal posts at corners and gates need to be larger diameter than line posts; skimping there is why so many gates sag.
- Privacy options. Slats woven into the chain link, or a tensioned privacy screen, give you a visual barrier without a solid fence. It’s a cheaper route than wood, but it does catch wind, which matters more in Irving than most people expect.
- Gates. Manual is standard. If the driveway gate is wide and used daily, an opener is worth pricing separately.
Where it fits into a larger yard plan, this often comes up as part of a full Fence Installation in Irving scope that includes more than one fence type around the property.
What a Chain Link Fence Costs in Irving, TX

Plan on $3,500 to $9,000 for a typical residential chain link fence in Irving. A straightforward 150-foot, 4-foot galvanized run on flat ground lands near the bottom. A 300-foot perimeter at 6-foot with vinyl coating, two gates, and old-fence removal runs toward the top.
The variables that move the number:
- Linear footage. Most of the price. Roughly $18 to $30 per linear foot installed, depending on height and gauge.
- Height and gauge. 6-foot 9-gauge costs meaningfully more per foot than 4-foot 11.5-gauge.
- Removal and disposal. Old chain link is a half-day add; buried concrete footings from an old wood fence can add more.
- Terrain and grade. A sloped yard needs stepped panels or racked rail, both of which slow the crew.
- Gates. Each gate is priced on its own; a double drive gate is the single biggest line item after the fence run itself.
- Permits and HOA approval. Handled in the estimate, not tacked on later.
Your written estimate lists footage, gauge, coating, post spacing, gate count, removal, permit, and disposal as separate lines. What it won’t include unless we flag it: sprinkler repair if a line gets hit, or grading work if the yard drains toward the fence line. We’d rather tell you that up front than surprise you mid-job. The local pro we connect you with is licensed and insured as Texas requires, and no-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to a Chain Link Fence Job
Irving is two construction worlds in one city, and the fence work reflects it. In the older core along the 183 corridor, the ZIPs 75060, 75061, and 75062 hold 1950s and 60s brick-veneer tract homes on slab, and the original chain link on those lots is often 40 years old, rusted at the ground line, with posts leaning from decades of clay movement. That’s a tear-out-and-replace job, and the buried footings slow the crew. Over in Las Colinas and Valley Ranch, the planned-community HOAs governed by design review want the fence approved before a post goes in: color, height, and sometimes material are specified. We’ve seen black vinyl-coated chain link pass design review where galvanized didn’t. A homeowner there should not order material before the architectural committee signs off.
The soil is the other story. Irving sits on expansive black clay that swells with spring rain and shrinks through a hot summer, so a post set to bare minimum depth will heave and the whole run goes crooked. Spring storms and hail events also mean fence fabric, not just roofs, takes a beating, and a loose post after a wind storm is a repair, not a mystery. When we’re working across Irving, we set posts deeper and brace the corners harder for exactly this reason.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Irving

Most residential chain link fences in Irving are installed in one to three days of on-site work, once permits and HOA approval are in hand. A simple 150-foot run is often a single day plus removal; a 300-foot perimeter with gates and old-fence tear-out runs closer to three. The permit and HOA approval timeline, which varies by neighborhood, is usually the longer wait, not the install itself.
Many Irving fence installations require a City of Irving permit, and the requirement depends on height, location on the lot, and whether a pool barrier is involved. The local pro we connect you with pulls the permit and handles the inspection as part of the job. Confirm the requirement for your specific address before you buy material, and call (844) 560-4467 for a free estimate that includes the permit in the written quote.
Yes, in most cases, and the 811 locate is how we protect your utilities. We call for locates before any digging, and if a sprinkler or irrigation line runs the fence line, we flag the conflict before the first hole. Relocating a gas or electrical line is rare and gets priced separately if the locate finds one in the way; most Irving lots have clear fence lines. Call (844) 560-4467 to walk your property with the estimator first.
Chain link fence in Irving runs $3,500 to $9,000 for a typical residential job, with 6-foot vinyl-coated runs and gates landing at the higher end. Linear footage, gauge, coating, gates, and old-fence removal are the main movers, and a written line-item quote spells out every one. Call (844) 560-4467 for an exact quote; estimates are free.
Every chain link fence we connect you with is backed by the 730-Day Done Right Promise, and the labor is covered for two full years. If a post heaves, a gate sags, or the installation isn’t right, we make it right. The pro behind the job is licensed and insured as Texas requires. Call (844) 560-4467 to schedule your free estimate.
If you’re also replacing exterior doors as part of a broader exterior update, homeowners often pair a fence project with Door Installation in Irving while the crew is already on site.
Get a Free Chain Link Fence Estimate in Irving
Call (844) 560-4467 and a live person answers, any hour, any day. We’ll set a time to walk your property, measure the run, and hand you a written line-item estimate with footage, gauge, coating, gates, removal, permit, and disposal spelled out. You’ll know what it costs before you commit, and the 730-Day Done Right Promise backs the work in writing. Explore our Fence Installation service for the wider scope.
Written by the team at Groundwork Construction Co.












