







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Farmers Branch, TX: What the Job Actually Costs and Takes
Paver driveways in Farmers Branch typically run $7,000 to $18,000 for a standard residential driveway, with most projects finished in three to five working days once materials are on site. That price covers removal of the old surface, compacted base, and a finished paver surface, but it does not cover fixing drainage problems the old driveway was hiding. Call (844) 560-4467 if you want a written number for your own slab.
North Texas sellers swap quality for speed. A $150 coffee table isn’t hard. The mistake isn’t buying it, it’s trusting it, and nobody remembers a listing that promised real wood.
How We Actually Install a Paver Driveway in Farmers Branch
Save the detailed pallets. Dump the manufacturer copy. A drive is set or it fails, and that’s all the homeowner needs to know.
- Day 1 – demo. We pull out the existing surface. Concrete comes out in sections. Asphalt gets milled. If the old drive was failing because of poor base, we find out here, and it’s the most common reason a Farmers Branch quote changes.
- Day 1 and 2 – grading and subgrade. This is the phase that decides whether the drive lasts 10 years or 30. The slab gets excavated 6 to 8 inches down. Contractors in Farmers Branch deal with expansive clay that swells when it’s wet and shrinks when it’s dry, so the base has to be graded to shed water, not designed to sit under water. Missing this step is why some newer driveways start settling inside five years.
- Day 2 and 3 – base and compaction. Crushed stone goes in lifts of 4 to 6 inches. Each lift is compacted. Homeowners pick the paver family and pattern here, and this is the last point to change an order without a restock or a wait.
- Day 3 and 4 – setting pavers. Edge restraints go in first, then the pavers themselves. Patterns, borders, and any soldier courses were decided before the first paver goes down, because changing them mid-install is expensive.
- Day 4 and 5 – finish and final check. Sand gets swept into the joints. Then a plate compactor runs over the whole surface to seat the pavers into the sand. After that, a final walk-through with you, then the site is cleaned.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before Day One
You’ll pick a paver material, a pattern, a color, and an edge treatment. Those four decisions lock in the price, so it’s worth ten minutes of real thought.
- Belgard and Techo-Bloc concrete pavers are the standard for Farmers Branch buyers. They run $5 to $9 per square foot installed and hold their color for 20 years, and they have the most patterns. They’re also the easiest to replace a single damaged piece on.
- Unilock, when it’s available offers European-style finishes and large-format formats that mimic stone. Cost runs 15% to 30% higher than standard concrete pavers, and the visual payoff is real, but lead times can stretch past two weeks.
- Natural stone (flagstone, sandstone) sits at the top end, $12 to $20 per square foot, and it suits homes with heavy stone or brick exteriors. It’s the most varied in color and the most demanding to install, because individual stones have to be fitted.
- Pattern matters almost as much as material. Herringbone and running bond interlock well and survive vehicle traffic best. Basketweave and oversized formats are more prone to edge creep if the base isn’t right.
- Edging. A solid concrete or paver edge restraint is not optional here. Without it, the drive spreads at the sides over clay movement.
What Paver Driveways Cost in Farmers Branch, TX

Paver drive installation in Farmers Branch runs $7,000 to $18,000. The range is that wide because three or four variables do almost all the moving.
| Line item | Typical range |
|---|---|
| Paver driveway installation, standard 2-car | $7,000 – $18,000 |
| Base repair or re-grading | $1,500 – $4,000 (if needed) |
| Drainage correction or a new drain line | $800 – $2,500 |
The variables that push a job toward the high end: driveway size (a one-car drive sits near $7,000, an oversized or circular drive can pass $18,000), current condition (a driveway that has been patched repeatedly, or one with an unstable base, adds demo and re-compaction cost), paver grade (concrete pavers versus natural stone), pattern complexity (herringbone and custom borders take longer), and slope. Farmers Branch is mostly flat, but some lots drain toward the street or toward a neighboring lot, and that needs correction before pavers go down.
A written estimate itemizes pavers, base, sand, edge restraint, labor, and disposal. Items that usually aren’t included: structural repair to the drive apron where it meets the street, moving sprinkler heads or irrigation lines, or rerouting a utility. We identify those up front rather than discovering them mid-job.
See the difference
Before
After
Before
After
Before
AfterWhat Farmers Branch Specifically Does to This Job
Farmers Branch is a built-out inner-ring suburb, and new construction here is almost all infill: 1950s and ’60s ranches torn down and replaced with larger custom homes on the same 7,000 to 8,000 square foot lots. That changes paver driveway work. Crews are working in tight, fully occupied residential blocks where staging matters as much as square footage. A full driveway tear-out means coordinating where the dumpster sits, where material gets staged, and how neighbors get in and out – and on a street where one lot is new construction and the next is an original ranch, that conversation happens before the first scoop of concrete comes out. The drought-to-flood clay cycles underneath those lots are the reason base prep gets so much attention on this page. And because so many of the new two-story builds push against setback and impervious-cover limits, drainage is often the real design problem, not the pavers themselves. If your project is part of a full Driveway & Pavers in Farmers Branch scope, we’ll work out how the paver drive ties into the rest of the hardscape. Our Driveway & Pavers team handles the whole sequence, and we cover Farmers Branch routinely. Homeowners often pair this with Door Installation in Farmers Branch when they’re upgrading the front entry at the same time, or with Cabinets & Countertops in Farmers Branch inside the house.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Farmers Branch

Three to five working days for a standard residential driveway, from demo through final compaction. Larger or heavily patterned drives run five to seven days. Rain days push the schedule, especially during base-prep, because you can’t compact saturated clay. Call (844) 560-4467 and we’ll give you a realistic date range for your driveway.
In most cases a paver driveway replacement on an existing footprint doesn’t require a building permit, but widening the driveway, changing the curb cut, or altering grading and drainage at the lot line typically does. Farmers Branch sits in Dallas County, so check with the city before work starts. We’ll tell you in the estimate whether your project triggers a permit and what that adds.
Sometimes, but not usually for a full driveway. A pavers-over-concrete install works only if the existing slab is sound, correctly sloped, and has room for the paver bed without raising the drive above the garage threshold. In Farmers Branch, older 1950s and ’60s slabs often have hairline cracks and settled sections, and a paver overlay on a failed slab will fail with it. We assess the slab in the estimate before recommending an approach.
The typical range is $7,000 to $18,000. The price should hold once you have a written, itemized quote. The main reasons a paver driveway price changes are discovering a failed base during demo, finding an irrigation line that needs to be moved, or adding drainage correction that wasn’t in the original scope. All three get documented before any work continues. Call (844) 560-4467 for a free estimate.
Workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers installation issues like settlement, edge failure, and joint problems. Paver manufacturer warranties vary by brand and cover defects in the pavers themselves. Call (844) 560-4467 if you have a warranty question on a specific paver line.
Get a Free Paver Driveway Estimate in Farmers Branch
Call (844) 560-4467 for a free on-site estimate on paver driveways in Farmers Branch. We’ll walk the driveway with you, note the base, grading, and drainage conditions, measure the square footage, and put a line-item number in writing. A real person answers the phone, 24/7. There’s no charge for the estimate and no pressure to book.
Written by the team at Groundwork Construction Co.












