







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Addison, TX: What the Job Actually Involves
Paver driveways in Addison, TX typically cost $7,000 to $18,000 and take two to four days from demo to final compaction, assuming the base is sound and no utilities need relocating. Most of that is the excavation and base work you never see once the pavers go down. If your current surface is cracked, heaved, or draining toward the garage, call (844) 560-4467 and we’ll walk you through what a replacement actually requires before anyone touches a shovel.
How a Paver Driveway Gets Built, Stage by Stage

Paver work rewards patience in the first two days and looks effortless in the last two. Here’s the real sequence.
Day one: layout, demo, and haul-off
We start by marking the new limits and checking utility locates so nobody finds a gas line with a plate compactor. Existing concrete or asphalt gets broken out and hauled away, and we confirm the new driveway meets Addison’s setback and right-of-way requirements before grading begins. On a typical single-car drive in 75001, demo runs one full day. From that point forward, you’ll start seeing the base take shape.
Day two: excavation, base, and compaction
The base is the whole job. We excavate to depth, then build up a compacted crushed-stone base, usually six to eight inches depending on soil and loads, compacted in lifts. Skipping lift compaction is the number one reason paver driveways sink and rut within three years. The homeowner decides here whether to add a geotextile separation layer, which we recommend on the heavier clay pockets common around Addison.
Day three: edge restraint, bedding sand, and pavers
We set edge restraint before the pavers, then screed bedding sand and lay the pattern. Herringbone handles vehicle loads best; running bond and basketweave are decorative and cost the same in labor but demand a wider base. This is where material choice finally shows up on the ground, and it’s the stage most homeowners want to watch. It’s also the stage where the pattern and color become permanent.
Cutting, joint sand, and final compaction
Cuts around the apron, curb, and any radius come last. We fill joints with polymeric sand, apply a light mist, and run a final compaction pass to lock the surface. Polymeric sand resists washout better than plain sand, and in North Texas it earns its cost during spring storms.
Walkthrough and cleanup
We do a joint-by-joint inspection with you, note anything that needs attention, and haul off all debris. You get a written closeout covering the base spec, the paver brand, the pattern, and the terms of our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Paver driveways aren’t one product. These are the decisions that change both the look and the number.
- Concrete pavers (Belgard, Tremron): The workhorse choice. 60mm thickness for residential driveways, 80mm if you park a heavy truck. Honest trade-off: pavers cost more up front than stamped concrete but tolerate freeze-thaw and shifting far better and can be lifted and reset individually if a section heaves.
- Permeable pavers (Unilock, Techo-Bloc): Open-graded joints and a stone reservoir base let water drain through. Worth the premium where runoff crosses into a garage or where an Addison lot drains poorly. Slightly higher install cost and a base that has to be done right or the system fails.
- Finish and color: Tumbled, chamfered, and smooth finishes all influence how the surface ages. Tumbled hides scuffs better; smooth cleans easier. Order all pavers in one batch to avoid dye-lot mismatch.
- Pattern: Herringbone at 45 degrees reads classic and handles turning wheels; running bond reads clean and modern. Ask for a sample panel on the ground before committing to a pattern.
- Edge restraint and border: A soldier-course border and a hidden concrete or plastic edge restraint keep the field locked. It’s a small line item that saves years of maintenance.
See the difference
Before
After
Before
After
Before
AfterWhat Paver Driveways Cost in Addison, TX

Expect $7,000 to $18,000 for a residential paver driveway in Addison. A standard two-car drive lands toward the middle; a short single-car drive with a basic concrete paver lands near the bottom. The line items below show where the money goes.
| Item | Typical range |
|---|---|
| Full paver driveway installation | $7,000 – $18,000 |
| Demo and haul-off of existing surface | $800 – $2,500 |
| Base excavation and compacted stone | $1,500 – $4,500 |
| Permeable system with reservoir base | Adds 15 – 25% |
| Edge restraint and border course | $400 – $1,200 |
Variables that push a project to the high end: square footage (each added parking space adds real cost), the depth and condition of the existing base, whether drainage has to be redirected, material grade (Belgard and Unilock premium lines cost more than builder-grade), and whether curbs, aprons, or utility relocations are needed. A written estimate itemizes the base spec, paver brand, pattern, and haul-off, and states the fixed price so there are no change orders once work starts.
What Addison Property Reality Does to This Job
Addison is a small, nearly built-out 4.4-square-mile city dominated by restaurants, hotels, offices, and the Addison Airport; its housing is mostly multifamily and townhome with pockets of single-family, so a paver driveway here is often a tight-space job. That means alley-load access, short approaches to a garage apron, and a run that has to mate cleanly with a shared curb or an HOA-maintained frontage. Because so much of the existing built environment dates to the 1970s – 1990s, we regularly find thin base, settled sections, and undersized drainage. North Texas heat, spring hail, and occasional winter freezes do the rest, causing heave at the edges where water pools. Working around parking access and an operating neighbor is part of the job in Addison, and it shapes both scheduling and the plan we put on paper.
Serving Addison, TX – Our Local Coverage Area
We serve Addison and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Paver Driveways in Addison

A typical paver driveway in Addison takes two to four days from demo to final compaction, weather permitting. Larger drives, permeable systems, or finding a failing subbase during excavation can add a day or two. Call (844) 560-4467 for a schedule that reflects your actual site.
Often yes, because a driveway touches the right-of-way and setback rules, and we pull and manage permits as part of a written scope. Your specific address and layout determine what the city requires, so we confirm before demo begins. Call (844) 560-4467 and we’ll explain what applies to your lot.
Usually, yes; a paver driveway sits above the slab and base, so unless a locate shows a utility conflict or the grade has to drop, no structural moving is needed. Utility locates are still standard. If a conflict turns up, we price the fix transparently before proceeding.
Paver driveways in Addison run $7,000 to $18,000 for a residential drive, with size, base condition, material grade, and drainage driving the final number. Permeable systems and premium pavers push toward the high end. Call (844) 560-4467 for an exact quote, and estimates are free.
Every project we do is covered by our 730-Day Done Right Promise, which directly guarantees the installation for two full years. If a joint, edge restraint, or base issue shows up, we make it right. Paver manufacturers also warr












