







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Irving: What It Takes
Concrete driveways and concrete work in Irving typically run $4,500 – $12,000 for a full driveway pour, and most residential slabs are finished in three to five days from demo to final cure. The work includes tear-out of the old surface, grading and base prep, form-setting and rebar, the pour itself, and finishing. Call (844) 560-4467 for a free on-site estimate before anything moves. A lot of what drives the number here is what’s underneath, not what you see on top.
How We Run a Concrete Driveway Job in Irving, Start to Finish

Concrete is unforgiving. You get one pour to do it right, and the prep work is most of the job. Here’s the sequence we follow on an Irving driveway.
Day 1: Site walk and layout
We walk the property with you, mark the edges of the new driveway, and confirm the slope away from the house. On Irving lots this matters more than people expect. The expansive black-clay soil here shifts with the seasons, and water that pools against a slab finds its way in. We also check the location of the water main, gas line stub, and any sprinkler runs before a shovel hits the ground. You decide the width, the apron depth, and whether you want an expanded or decorative joint layout. That walk usually takes 30 to 45 minutes.
Day 1 to 2: Demo and haul-off
We break and remove the existing concrete, load it out, and haul it off-site. A standard two-car driveway takes half a day to a full day depending on thickness and how much rebar is buried in it. On older south Irving slabs, we often find a 4-inch pour with no rebar and no expansion joints, which is exactly why it’s cracked. Once the old surface is gone, we grade the subgrade and compact it in lifts. Water ponding anywhere on the exposed base gets corrected now, not later.
Day 2 to 3: Forms, rebar, and base
This is the stage most homeowners underestimate. We set forms to the correct fall, lay a compacted base, and tie a rebar grid so the slab holds together when the clay moves. On a driveway that sees real loads, we pour at least 4 inches at the edges and step it up in the thicker sections. You decide the finish here: broom for grip, a light salt-and-pepper, or an exposed-aggregate band at the street apron. This stage takes one full day, sometimes a day and a half.
Day 3: The pour
The truck arrives in the morning. We pour, screed, and float the slab, then cut control joints in the pattern we planned so the concrete cracks where we want it to, not where it wants to. Finishing takes two to four hours after the pour.
Day 4 to 5: Cure and cure-in
Concrete keeps gaining strength for weeks, but you can walk on it in 24 to 48 hours and drive on it after about seven days. We keep vehicles off until we’ve confirmed it’s set. Once cured, we walk the job with you, check the surface and the drainage grade, and leave the joint layout documented. If anything doesn’t match what we promised, the 730-Day Done Right Promise covers it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Actually Choose Between
A concrete driveway is a few material and finish decisions stacked on top of each other. Here’s what really changes the outcome and the price.
- Standard broom-finish concrete. The default. Good grip, hides tire marks, holds up in the DFW heat. It’s the base option, and for most Irving homeowners it’s the right one.
- Exposed aggregate. The aggregate is revealed on top for texture and a heavier look. Grippy, works well on a sloped or shaded driveway. Costs more than broom and is harder to patch cleanly if it ever chips.
- Decorative joint patterns and scoring. Custom joint layouts and color scoring give a poured slab the look of sections. Adds cost, adds visual interest, and the quality depends entirely on who cuts the joints.
- Reinforcement: rebar vs. mesh. On Irving’s clay, we recommend rebar over wire mesh. It’s a small bump in cost and a much bigger difference in how the slab handles movement.
- Slab thickness. A 4-inch slab suits a passenger car. A thicker slab at the apron or where an RV or heavy truck parks is worth the money.
- Drainage and grading. A grading correction or a channel drain is one of the honest ways a driveway lasts. It adds cost up front and saves a foundation problem later.
Our crews have up to 12 years of experience with concrete and build to the finish you pick, backed by brand partners we trust across the trades, including Owens Corning and CertainTeed on the roofing side when a project grows past the driveway.
What Concrete Driveways & Concrete Work Costs in Irving, TX

A full concrete driveway installation in Irving runs $4,500 – $12,000. A driveway replacement, where we tear out and re-pour an existing slab, lands at $5,000 – $14,000. Driveway sealing, which we’d recommend down the line on a new pour, is priced separately at $250 – $700. Here’s a line-item view of what moves the number:
| Line item | Price range |
|---|---|
| Concrete driveway installation | $4,500 – $12,000 |
| Driveway replacement (remove and repour) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
The low end is a smaller, simple slab with broom finish and no grading surprises. The high end is a longer two-car drive, an old slab with heavy rebar that slows demo, a thicker pour, rebar reinforcement, and a grading correction to move water away from the house. A drain or a retaining element adds more. What’s included in our written estimate: demo, haul-off, base, reinforcement, forms, pour, and joint work. What typically isn’t: driveway sealing down the road, a new channel drain if the yard needs one, and any concrete work on steps or walkways. You get the number up front and in writing, and it doesn’t change once we start unless you change the scope.
See the difference
Before
After
Before
After
Before
AfterWhat Irving Homes Specifically Do to This Job
Irving has two construction worlds inside it, and that shapes concrete work here. South of the 183 corridor, in ZIPs like 75062, the housing stock is post-war 1950s and 1960s brick-veneer tract homes on slab. Those driveways have been through decades of DFW summers and flash-flood storms, and a lot of them are the original pour. We see the same failure pattern over and over: thin slabs, cracked at the edge because the clay underneath swelled and shrank with the wet and dry seasons and there was never any rebar to hold it together. Up in Las Colinas and Valley Ranch, the ZIPs around 75038 and 75039, the work is different. Planned-community homes often have HOA design review on any driveway or hardscape change, so we confirm what the community will approve before a form goes down. Drainage correction is a constant there too, because a cracked slab and a bad grade combine fast in a hard rain. We work both sides of Irving, from the older core near the 183 to the planned communities, and the approach stays the same: fix the water, then pour the slab.
Serving Irving, TX – Our Local Coverage Area
We serve Irving and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Irving

Most residential driveway jobs take three to five days from demo to final cure. Demo and prep are the first day or two, forms and rebar go down on day two or three, the pour happens mid-week, and you’re driving on it after about seven days of cure. Rain in the DFW spring pushes the schedule, so we build a buffer into the plan.
It depends on what the job touches. A straight replacement of an existing driveway in the same footprint often doesn’t require one, but a new approach to the street, a changed grade, or added hardscape can. We check the requirement for your specific address and handle the paperwork if it applies. Call (844) 560-4467 and we’ll sort it out on the estimate.
We can pour over an existing slab in some cases, but it’s usually not the right call. It raises the driveway height, can trap water, and doesn’t fix a base that’s already failed. On Irving’s clay soil, a clean tear-out and a proper rebar-reinforced pour is the better long-term value. We’ll tell you which one fits your lot and show you the math.
No. The written estimate covers demo, base, reinforcement, forms, pour, and joints, and the number we quote is the number you pay unless you change the scope yourself. If we open up the slab and find something genuinely unexpected, like a buried line or a failing grade, we stop and tell you before doing anything else. No surprises.
Every job falls under the 730-Day Done Right Promise. If the workmanship isn’t right, we make it right, and that’s a written commitment, not a handshake. That covers the install itself, including the grading and joint work that go into a driveway that lasts. Call (844) 560-4467 for the details on how it applies to your project.
Get a Free Estimate on Concrete Work in Irving
Call (844) 560-4467 and we’ll set up a free on-site estimate for your concrete driveway or concrete work in Irving. On the call, we’ll ask about the driveway’s size and condition, confirm whether your address needs a permit, and book a time that works. You’ll get a written, line-item quote with the number you’ll pay. A live person answers, 24 hours a day. We also handle Driveway & Pavers in Irving when the wider project scope comes up, and homeowners often pair a new driveway with ADU Site Prep & Utilities in Irving or Door Installation in Irving. Our driveway & pavers service fits into full exterior plans, all part of what we do across Irving.
Written by the team at Groundwork Construction Co.












