







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Highland Park, TX
Cabinets & countertops in Highland Park typically run $14,000 to $45,000 for a full run of custom cabinetry with natural or engineered stone tops, and the work takes two to four weeks from demo to final caulk. The number swings mostly on whether you’re refacing or replacing, how much of the electrical and plumbing has to move behind the boxes, and how closely the tops have to match the room’s original detailing. Call (844) 560-4467 for a free on-site estimate and a written line-item quote.
How the job actually runs, stage by stage

Every Highland Park job we quote is a renovation inside an existing house, and the sequence below is what we hold to. These are real durations, not marketing windows. Cabinet stock, stone slab availability, and inspection scheduling are the three things that actually bend the calendar, and we build that into the schedule up front.
- Day 1 – measure, protect, and demo. The lead measures the box runs to the sixteenth, inspects the wall for plumb and square, and pulls the old doors and tops. Demo of an existing kitchen is typically one day. Anything found behind the wall – knob-and-tube wiring, a cast-iron drain line, soft drywall from an old leak – gets photographed and priced in writing before we touch it further. This is where a $14,000 job and a $45,000 job separate.
- Days 2-3 – rough-in and substrate. Electrical for under-cabinet lighting, outlets above the counter, the dishwasher circuit, and any relocated plumbing happen here. New cabinets go onto a level, screwed substrate, not on top of a floor that has moved. We shim and scribe to the wall so the fascia lines don’t walk. You decide the light temperature and switch layout at this point; changing it after the drywall goes back is expensive.
- Days 3-7 – cabinet set. Boxes go up, uppers are hung and shimmed, the island gets set and leveled, and the drawer and door reveals are checked before we call the templater. You make the hardware decision here – pull style, handle finish, and placement. Highland Park homes with a carriage-house or Tudor aesthetic usually land on a period-appropriate pull rather than a modern bar.
- Days 7-12 – template, cut, and install stone. The countertop fabricator templates in person, so the backsplash and seams land where they should. Slab cutting and edge finishing take several business days, then the tops set, seams are epoxied, and the sink goes in. You choose the edge profile and the sink at template, not after.
- Days 12-18 – finish out and final. Backsplash, caulk, appliance reinstall, toe-kick, and punch walk. We do a full punch list with you on site and hand over the written workmanship warranty, which runs under our 730-Day Done Right Promise. If something isn’t right, we make it right – that’s the guarantee in writing, not a promise.
These durations assume standard-size stock or semi-custom boxes. Full custom cabinetry with a matching finish to an original built-in can add one to two weeks to the build, which we schedule before demo, not after.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’re choosing between
The most common mistake on this job is picking the slab first and the box second. Do it the other way around. The cabinetry sets the budget and the storage layout; the tops follow the box footprint.
- Stock versus semi-custom versus full custom boxes. Stock runs at the low end of the cabinet line item; semi-custom lands in the middle with a real choice of door styles and sizes; full custom at the top matches an original built-in to the millwork and can take weeks of lead time. For a 1910s-1930s house, semi-custom is often the sweet spot – the proportions fit and the cost stays controllable.
- Paint versus stain versus a factory finish. Painted cabinets hide the wood grain and take a color change well but chip at the door edges over time; a factory-cured finish outlasts a site-sprayed one on a high-traffic run. You’ll notice the difference in a household that actually cooks.
- Natural stone versus engineered quartz. Quartz (Caesarstone is a solid option) is non-porous and doesn’t need sealing, and it takes an edge profile cleanly. Natural marble gives real veining but etches from lemon and red wine. For a Highland Park home with period detailing, marble reads more historically correct; for a busy family, quartz creates fewer sharp edges on the maintenance calendar.
- Sink and faucet. An undermount farmhouse or a deep single-bowl sink with a Moen or Kohler faucet is the practical default. A Blanco composite sink handles a heavy pot without ringing. The sink drives the countertop cutout, so pick it before template, not after.
- Backsplash and edge profile. A simple slab-match or a straight-set tile keeps the visual line clean and the install fast. A full-height marble backsplash with a book-matched seam is beautiful and adds real dollars. Choose the edge profile at template – eased for a clean look, ogee or bullnose if the house wants period weight.
What Cabinets & Countertops costs in Highland Park, TX

Plan on $14,000 to $45,000 for the full job in Highland Park. That’s the honest working range for a renovation in this housing stock. Below is what drives the number up or down, and where each line item typically lands:
| Line item | Typical range |
|---|---|
| Cabinet installation (or replacement) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island (if in scope) | $3,000 – $10,000 |
| Total project (all boxes and tops in scope) | $14,000 – $45,000 |
What pushes a job toward the top of that range: full custom boxes, moving the sink or range to a new wall (which pulls plumbing and electrical), a foundation issue that has to be leveled under the box run, a full-height stone backsplash with book-matched seams, and a slab-grade you can only get through a specialty supplier. What pushes it toward the bottom: refacing existing boxes instead of replacing them, keeping the sink and range where they are, a standard-size run, and engineered quartz with an eased edge.
A written estimate from us lists every line item – cabinets, tops, backsplash, hardware, sink, faucet, electrical, plumbing, permits if required, and labor – with a fixed number for each. No change orders on scope we’ve already measured. If something new surfaces behind the wall, you get it in writing before we proceed. No-hassle upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park homes specifically do to this job
Highland Park is a nearly built-out, architecturally controlled town, and that changes this job in ways it doesn’t in neighboring Dallas or the newer edges of University Park. Almost every kitchen here is a renovation inside a century-old house – so the cabinets you set are going into a wall that may not be plumb, an opening that may have been cut 80 years ago to a different tolerance, and a floor that has moved with the North Texas black-clay soil cycle. We see this on the 1910s-1930s Tudors, Colonials, and Mediterranean homes on heavily treed lots off Lakeside Drive and along the streets around Beverly Drive, where pier-and-beam foundations and cast-iron drain lines are routine findings on the first day of demo. That service stub you’re relocating may be original cast iron.
Two Highland Park realities sit on top of that. First, the town has its own building inspection department, separate from Dallas, and projects can clear design-review or Historical Review Board approval only after permitting – so we schedule and pull permits early, and we don’t demo until the permit is in hand. Second, the town’s tree-protection rules and tight lot lines mean a protected live oak’s root zone or a design variance can stall a project before tools come out, which is exactly why we inspect the property and pull the drawings together before we quote a number. If your cabinet and countertop work is part of a full Kitchen Remodeling in Highland Park project, we sequence the permit scope so the cabinetry schedule doesn’t collide with the structural work. You’ll find the rest of what we do across Highland Park on the service-area page.
Our technicians have up to 12 years of experience across the trades that touch this job, and they’ve worked Highland Park’s housing stock long enough to know a knob-and-tube outlet when they see one behind a base cabinet. That matters here. It’s the difference between a clean install and a discovery on day three.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Highland Park

Plan on two to four weeks from demo to final walk, with the countertop template the biggest variable. Custom boxes and a specialty slab run longer; standard semi-custom and a standard quartz top usually land closer to the two-week mark. Call (844) 560-4467 for a schedule built around your slab and box lead times – estimates are free.
Not for a like-for-like swap, but you do if plumbing or electrical is being relocated, or if the job is part of a larger scope. Highland Park runs its own inspection department separate from Dallas, and we pull the permit before demo, not after – so call (844) 560-4467 to talk through what your scope actually triggers.
Yes, and it’s the fastest, least expensive path. If the sink and range stay on their existing walls, we avoid opening the wall for drain relocation and keep the job on a tighter schedule. The caveat: a cast-iron drain line found during demo may have to be replaced whether you want to or not, and we’ll price it in writing before we touch it. Call (844) 560-4467 for a straight answer on your kitchen.
Typically $14,000 to $45,000 for a full run of cabinetry and countertops, depending on box grade, stone choice, and whether plumbing has to move. Budget jobs with refacing and engineered quartz come in closer to the bottom; full-custom boxes with a book-matched marble top run to the top. Call (844) 560-4467 – estimates are free and the quote is line-item.
Workmanship is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Materials carry their manufacturer’s warranty separately, and we’ll tell you the coverage on the boxes, tops, faucet, and sink before you sign. Call (844) 560-4467 to get it in writing.
Get a free cabinet & countertop estimate in Highland Park
A free on-site visit starts with the lead measuring your existing boxes, checking the wall for plumb and the floor for movement, and talking through refacing versus replacing. You’ll leave the visit with a written line-item quote in hand – cabinets, tops, backsplash, sink, faucet, labor, and permit scope all priced separately. The phone is answered by a live person, 24/7, so there’s no voicemail window. Call (844) 560-4467 to schedule your free estimate, and we’ll put a real number in front of you before any work starts.
Written by the team at Groundwork Construction Co.












