







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Plano: What the Job Actually Involves
Replacing cabinets and countertops in Plano typically runs $14,000 – $45,000 and takes two to four weeks from demo to final caulk, depending on whether you’re swapping fronts or gutting a full run. Most Plano jobs land in the middle: new cabinet boxes, quartz or Caesarstone tops, and a sink-and-faucet swap. Call (844) 560-4467 for a free on-site estimate – we measure in person and hand you a fixed, line-item quote before anything is ordered.
How We Run a Cabinet and Countertop Job, Stage by Stage

Cabinet and countertop work is a sequencing problem more than a building problem. Get the order wrong and you’re cutting a new countertop because the cabinets settled or a corner wasn’t checked. Here’s how we run it so nothing gets redone.
Stage 1: Template and field measure (day 1, about two hours)
We measure the walls in three places, not one – Plano homes built in the 1970s and 1980s along the central corridors rarely have square walls, and a wall that’s out a half-inch over eight feet will show at the countertop seam. We photograph the layout, check for outlets and gas lines we’d need to move, and confirm cabinet depths. You confirm door style, finish, and hardware right here, because this is the point of no return for ordering.
Stage 2: Order, lead time, and material lock (two to four weeks)
Cabinet lead times dominate this stage, usually two to four weeks. You’ll also approve the countertop slab or color at this point. If your community requires an architectural review, this is when we submit the door style, finish, and visible exterior changes so approval lands before the truck does. Nothing is demoed until everything’s onsite.
Stage 3: Demo and prep (days 1 – 2 of install week)
We pull old cabinets, remove the countertop, and strip the backsplash if it’s coming out. Sink, dishwasher, and disposal get disconnected; we cap the plumbing and label the electrical so nothing gets buried. This is the messy day – expect dust and noise. We protect floors and seal off the work area so the rest of the house stays livable.
Stage 4: Cabinet install and leveling (days 3 – 5)
New boxes go in plumb and level before anything is hung or topped. We shim, scribe to the wall, and set the cabinet run so the countertop has a flat surface to sit on – this is what prevents that annoying gap or rocking you see on sloppy installs. Doors and drawers go on last, then we adjust every hinge and slide.
Stage 5: Countertop template, fabrication, and set (days 7 – 14)
After the cabinets are set, we bring in the countertop template – a physical template for stone, because a rough cabinet install can shift the numbers. Fabrication takes about a week, then the slab sets. Sink and faucet go in (a Blanco or Kohler undermount, depending on your choice), the dishwasher reconnects, and we caulk and clean. Plumbing and electrical hookups are finished and inspected if the scope requires a permit. You do a walkthrough with us before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’re Choosing Between, With the Honest Trade-offs
- Stock vs. semi-custom vs. full custom cabinets. Stock cabinets come in fixed sizes and cost the least, but gaps and fillers cost you usable storage. Semi-custom (like KraftMaid’s line) lets you adjust widths and finishes for a modest bump – usually the sweet spot for a Plano kitchen that isn’t a full gut. Full custom buys you exact dimensions and exotic finishes at the high end of the $14,000 – $45,000 range.
- Plywood vs. particleboard boxes. Plywood holds up better in North Texas humidity swings and survives a freeze event or a slow leak. Particleboard boxes are cheaper and fine if they stay dry – they just don’t tolerate moisture the way plywood does. We’ll show you the difference side by side.
- Quartz vs. granite vs. other stone. Quartz, including Caesarstone, is non-porous and doesn’t need sealing, which matters in a household that actually cooks. Granite is more heat-tolerant but needs periodic sealing. Porcelain and solid surface sit lower on the price ladder; stone sits at the top.
- Cabinet finish and door style. Painted finishes show wear at drawer edges over time; stained wood hides scuffs and can be touched up. Flat-slab doors read cleaner and cost less to fabricate than raised panels.
- Hardware and soft-close. Soft-close hinges and drawer slides add a small amount to the budget and are the upgrade most people actually notice. Good hardware matters more than a fancy finish.
- Sink and faucet. Undermount sinks look cleaner and are easier to wipe; a quality faucet from Moen or Kohler outlasts the bargain bin version, and the install is straightforward while the countertop is off.
What Cabinets & Countertops Cost in Plano, TX

Expect $14,000 – $45,000 for a cabinet and countertop job in Plano, with most mid-range projects landing between $18,000 and $32,000. Here’s how the number moves:
- Size and layout. An L-shaped kitchen with under 20 linear feet of cabinets lands near the low end. A U-shaped or galley-plus-island layout near 40 linear feet pushes toward the top.
- Material grade. Stock particleboard cabinets and a solid-surface top sit low; semi-custom plywood and quartz sit in the middle; full custom and premium stone sit high.
- Moving plumbing or electrical. Relocating a sink, adding a dishwasher circuit, or moving a gas line adds real cost because it’s licensed trade work and, often, a permit.
- Existing condition. A 1975 home in 75075 with out-of-square walls and a settled floor needs prep that a 2005 build in 75093 doesn’t.
- Permit scope. A straight cabinet-and-top swap may not need one; moving plumbing, electrical, or structure does, and the City of Plano permitting and inspection turnaround is a real scheduling factor.
Your written estimate breaks out cabinets, countertop material and fabrication, install labor, plumbing and electrical, and permit fees where applicable. A few things typically aren’t included: appliance purchases, major wall or structural changes, and any surprise water damage found during demo. We flag those before we proceed, not after. Talk to us about 0% financing for 18 months and $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Plano Homes Specifically Do to a Cabinet and Countertop Job
Plano’s housing stock is the story here. The central and east corridors – ZIPs 75023, 75074, and 75075 – are largely 1970s and 1980s single-family homes, and pulling a cabinet there often exposes things a newer house hides: an out-of-square wall, a floor that’s off level, or a previous owner’s wiring shortcut. The west side, ZIPs 75024, 75025, and 75093, runs to 1990s and 2010s builds where the box is straighter but kitchens are newer and the ask is usually a refresh rather than a rebuild. In the 75024 and 75093 ZIPs we work in, foundation movement from the region’s expansive clay soils is common enough that we check for settling before we set cabinets – a level run on a moving slab is a failing run.
The other Plano-specific factor is process. Plano enforces a strict property-maintenance and permitting regime that’s tighter than much of surrounding Collin County, and most of the neighborhoods we work in have HOAs with architectural review. That shapes this job in ways a generic cabinet swap doesn’t cover. If you want the broader scope – layout changes, lighting, flooring, walls – that’s a different conversation: see Kitchen Remodeling in Plano. For the full scope of what our Kitchen Remodeling service covers, that page goes wider. And when homeowners pair a cabinet refresh with a bigger change – say, freeing up space by converting the garage or adding a unit out back – we handle those under Garage Conversion ADU in Plano and New Detached ADU in Plano. We cover the whole of Plano, from the older central corridors out to the west-side builds.
Serving Plano, TX – Our Local Coverage Area
We serve Plano and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Plano

Most jobs take two to four weeks from demo to final walkthrough, and the biggest chunk of that is cabinet lead time and countertop fabrication. The install itself is usually one to two weeks on site. Call (844) 560-4467 for a project-specific timeline once we’ve measured.
Often no – a straight swap that keeps the existing plumbing and electrical in place usually doesn’t trigger a City of Plano permit. Once you move a sink, add a circuit, or touch structure, it does. We tell you plainly whether your job needs one and pull it if it does.
Yes, and most Plano jobs keep the sink where it is. The trap is that moving a sink even a few inches means relocating the drain and supply lines, which adds licensed trade work and often a permit. If you want the sink elsewhere, we price it up front so there are no surprises mid-job.
Plan on $14,000 – $45,000, with a typical mid-range project around $18,000 – $32,000. Material grade, layout, and whether plumbing or electrical moves are the main levers. Call (844) 560-4467 for a free estimate with a fixed, line-item price.
Every project is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, backed in writing. That covers our workmanship on install, and we stand behind the material partners from KraftMaid, Caesarstone, and the rest.
Get Your Free Cabinet and Countertop Estimate in Plano
Call (844) 560-4467 to schedule a free on-site estimate for cabinets and countertops in Plano. We measure, photograph the layout, and talk through door style, material grade, and whether your job needs a permit or HOA approval. You get a written, line-item quote with a fixed price before anything is ordered. Live person answers the phone around the clock, and the estimate costs nothing.
Written by the team at Groundwork Construction Co.












