







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Plano, TX: What the Job Actually Involves
A standard interior door installation in Plano runs $450 – $1,100 per opening, and an exterior entry door replacement typically lands between $1,800 and $4,500 depending on size, material, and whether the frame is being rebuilt. Most single-door jobs are finished in one to two days; a whole-house swap of eight to twelve doors takes three to five. Call (844) 560-4467 for a free on-site estimate before you commit to anything.
How We Run a Door Installation, Start to Finish

Door work goes wrong when the frame is ignored. On Plano’s older homes, the opening has usually moved, swelled, or been patched at least once. We build the sequence around that reality.
Stage 1: Measure and assess the opening (day of estimate)
We check the rough opening for plumb, level, and square, then look at the jamb and header. On 1970s and 1980s Plano homes, this is where we find the surprises: out-of-square frames from decades of clay-soil movement, or a previous owner’s door that was trimmed to fit a sagging opening. You decide right here whether you’re replacing the slab only or the full prehung unit. That single decision swings the price more than anything else.
Stage 2: Order and confirm (3 to 10 business days)
Stock interior doors are quick. Custom sizes, exterior units, and anything with a specific finish or glass insert take longer. You confirm the swing direction, handing, hardware finish, and whether the door needs a specific fire rating (garage-to-house doors in Plano typically do). We give you the written line-item quote at this point, so the number you approve is the number you pay.
Stage 3: Demo and prep (2 to 4 hours per opening)
Old door and trim come out. We cut back to clean framing, check for rot or water damage at the sill and threshold, and repair any soft wood before anything new goes in. On exterior doors this is where we inspect the flashing and threshold pan, because that’s what keeps North Texas rain out for the next twenty years.
Stage 4: Set, shim, and hang (3 to 5 hours per opening)
The new unit gets shimmed at the hinges and strike, checked for reveal consistency on all four sides, and fastened. We hang the door, test the swing, adjust the strike plate, and install the hardware. If it’s an exterior door, we set the threshold, seal, and insulate the gaps.
Stage 5: Trim, caulk, and walk-through (1 to 2 hours)
Casing goes back on, nail holes get filled, caulk lines get run, and we walk the job with you. You check the latch, the swing, the seal, and the finish. Anything that isn’t right gets fixed before we leave. Every project is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost and long-term satisfaction comes down to decisions you make before we order. Here’s the honest trade-off on each.
- Slab replacement vs. prehung unit. A slab swap is cheaper and faster, but it only works if the existing frame is square and sound. A prehung unit replaces jamb and door together, fixes a bad opening, and runs more. On Plano homes past thirty years old, we usually recommend prehung.
- Hollow-core vs. solid-core interior doors. Hollow-core is light, cheap, and fine for closets. Solid-core costs more but kills sound transfer and feels substantial. Bedrooms and home offices benefit most.
- Fiberglass vs. steel vs. wood exterior doors. Fiberglass handles North Texas heat and humidity well and won’t dent or rust. Steel is strong and less expensive but can dent. Wood is beautiful and needs refinishing every few years. For most Plano homeowners, fiberglass is the practical pick.
- Hardware and finish. Standard builder-grade knobs are budget-friendly. A lever set or a specific finish (matte black, satin nickel, oil-rubbed bronze) adds cost. Decide early so it’s ordered with the door.
- Glass inserts and sidelites. Adds light and curb appeal to an entry door, adds cost too. Impact-rated glass matters if the door faces west and takes the afternoon sun.
What Door Installation Costs in Plano, TX

Interior door installation in Plano runs $450 – $1,100 per opening, installed with hardware and trim. Prehung exterior entry door installation typically runs $1,800 – $4,500. A full-house package of eight interior doors and one exterior door usually lands between $5,500 and $11,000 depending on material choices and frame condition.
What pushes a job toward the high end:
- Frame condition. Rot, water damage, or an out-of-square opening means carpentry repair before the door goes in.
- Material grade. Hollow-core slabs vs. solid-core, or steel vs. fiberglass exterior, is the biggest single swing.
- Size and configuration. Oversized openings, double doors, and anything with sidelites cost more.
- Hardware. Builder-grade knobs vs. premium lever sets and finishes.
- Permits. Exterior door changes that alter the opening size or involve structural work may require a City of Plano permit; interior swaps typically don’t. We tell you up front which side of that line your job falls on.
Your written estimate covers demo, framing repair up to a set allowance, the door unit, hardware, trim, caulk, and cleanup. It does not cover structural repair if we open a wall and find something unexpected; we document it, get your approval, and don’t proceed until you say so. That’s what no-hassle upfront pricing means in practice.
See the difference
Before
After
Before
After
Before
AfterWhat Plano Homes Specifically Do to This Job
Plano is a mature, largely built-out first-ring Dallas suburb, and most of the door work here is remodel rather than new construction. The housing splits cleanly: original single-family homes from the 1970s and 1980s along the central and east corridors (75023, 75074, 75075), and newer builds from the 1990s through 2010s out west. That split matters because the two eras fail in completely different ways.
On older homes in 75023 and 75075, we routinely find doors that have been trimmed, patched, and rehung at least twice. The frames are out of square from decades of movement on North Texas clay soils, and the original hollow-core slabs are usually warped at the bottom from humidity. Replacing those properly means fixing the opening, not just swapping the door. On the newer west-side builds, the original doors are usually structurally fine but the finishes have aged out or the layout no longer suits the owners, so the job is cosmetic but done at scale across the whole house.
Plano also enforces a stricter property-maintenance and permitting regime than many surrounding Collin County cities, and most subdivisions have an HOA with architectural review. If you’re changing the style, color, or material of an exterior door, check the HOA approval before we order; that’s the most common cause of delay we see on Plano entry door jobs. For a wider scope remodel, see our Windows & Doors in Plano page.
Serving Plano, TX – Our Local Coverage Area
We serve Plano and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Plano

One interior door is typically a same-day job, roughly four to six hours. Exterior entry doors usually take one full day, sometimes spilling into a second morning for trim and paint. A whole-house swap of eight to twelve doors runs three to five working days. Call (844) 560-4467 and we’ll give you a real timeline once we’ve measured the openings.
Interior door swaps generally don’t require a City of Plano permit. Exterior door replacement that keeps the same opening size usually doesn’t either, but any work that widens the opening, moves a header, or affects the structure does require one. We walk that line on every estimate and handle the permit if your job needs it. Call (844) 560-4467 with your address and we’ll tell you where you stand.
Not on our jobs. The written line-item estimate you approve is what you pay, and the only thing that changes it is hidden damage we can’t see until demo; if we find rot or a bad header, we document it and get your written approval before touching it. Estimates are free, so call (844) 560-4467.
Yes, in almost every case. A door swap is a finish-carpentry job, not a structural one, and we don’t touch plumbing or wiring unless the job specifically calls for relocating a switch or outlet near the new opening. On older Plano homes we confirm at the estimate stage whether anything is hiding in the wall.
Every door installation we do is covered by our 730-Day Done Right Promise. If the door binds, the frame shifts, or the hardware fails within that window, we come back and make it right. That’s twice the length of the typical workmanship warranty in this market, and it’s backed in writing. Call (844) 560-4467 to schedule your free estimate.
Get a Free Door Installation Estimate in Plano
If you’re planning door installation in Plano, start with a free on-site estimate. We come out, measure the openings, talk through material options and hardware, and hand you a written line-item quote with no surprises. You’ll know the total before you commit. Call (844) 560-4467; a real person answers around the clock, and we’ll get you scheduled.
Written by the team at Groundwork Construction Co.












