







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Richardson, TX: What It Costs and What’s Involved
A chain link fence in Richardson, TX typically runs $3500 – $9000, measured by linear foot, height, and gate count. Most residential yards here finish in one to two working days once we’ve called in the utility locate, because the post-and-mesh system goes up fast and cures without a waiting period. The range holds for the standard four-foot residential fence on a typical Richardson lot. Call (844) 560-4467 and we’ll walk your property line with you and put the number in writing before anything gets dug.
How a Chain Link Fence Goes In, Day by Day

Chain link isn’t a complicated build, but the sequence matters. Skip a step and you get leaning posts by the second summer. Here’s the real order of work, and where you make a decision.
1. Walk, mark, and locate (day 1, about an hour)
We pace the fence line with you, mark the corners and gate positions with stakes and paint, and you confirm the layout before we touch a shovel. Then we call in the utility locate, which in Richardson means the one-call service comes out and flags existing lines to the house. You decide here whether the fence runs tight to the property line or steps in a foot, and where the gates land.
2. Dig and set posts (day 1, two to four hours on a standard yard)
Terminal posts go in first, then line posts at consistent spacing, each set in concrete in a hole deep enough to get below the active soil layer. This is the stage that decides whether the fence stays plumb for twenty years or starts leaning after two wet seasons. You don’t have to make a call here; we handle the hole depth and concrete mix to suit what the soil tells us.
3. Cure time (overnight to 48 hours)
Concrete needs to set before we tension anything. On a normal North Texas week that’s an overnight hold; in a cold snap we wait longer. Short step, but skipping it is how mesh gets pulled crooked.
4. Rails, mesh, and tensioning (day 2, a couple of hours)
Top rail goes through the line post loops, the mesh gets rolled and stretched, and the tension bars and bands tie it in. This is where you’ll notice the difference between a fence that rings tight when you push it and one that sags. Tensioning is a feel job, not a spec job.
5. Gates, ties, and walkthrough (day 2, final hour)
Gate frames get hung, hinges and latches set, and we walk the whole run with you, checking post plumb and gate swing. You approve the finished line, and that approval starts your workmanship coverage. Whole job: one to two working days for most Richardson yards, longer for long runs or a lot of gates.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Chain link is a narrow category compared to fencing generally, but there are real forks in the road, and each one moves the price.
- Height. Four feet is the residential default and the cheapest per foot. Five and six feet add material and post gauge, and six-foot is common where a homeowner wants a bit more privacy and security. Every foot of height is more mesh, more post, and more wind load to resist.
- Mesh gauge. Thicker wire holds its shape and resists dogs and hail better; thinner wire is cheaper and dents more easily. There’s a genuine trade-off: budget mesh on a short run is fine, but on a long shared line we’d steer you thicker so it doesn’t look tired in a few years.
- Coating. Galvanized steel is the plain, cheapest finish and weathers to a dull gray. Vinyl-coated (usually black or green) costs more up front but holds color, feels better to the hand, and blends into landscaping.
- Post and rail weight. Lighter posts suit light residential use; heavier posts are worth it on gates and long unsupported spans, where the load concentrates.
- Gates and hardware. Walk gates, drive gates, self-closing hinges, and latches are add-ons. Every gate adds cost and every gate is a wear point, so placement matters more than quantity.
One honest note: chain link isn’t a privacy fence. If privacy is the actual goal, the same yard typically gets a different build, and it’s worth seeing the wider scope in our Fence Installation in Richardson overview before you commit to chain link.
What Chain Link Fence Costs in Richardson, TX

Residential chain link in Richardson lands between $3500 and $9000 for a typical yard. The low end is a short four-foot galvanized run with one walk gate; the high end is a long perimeter, six-foot mesh, vinyl coating, drive gate, and rough terrain. Here’s what moves the number:
- Linear feet and shape. The single biggest driver. Lots of corners and turns mean more terminal posts and more tension, which costs more per foot than a straight run.
- Height and gauge. Stepping from four to six feet with heavier mesh can add a meaningful slice to the total.
- Gates. A drive gate and hardware can add several hundred dollars by itself, and self-closing or double gates add more.
- Ground and access. Sloped yards, tight side yards, and rock or roots in the dig path add labor. This is where clay soil shows up in the price.
- Old fence removal. Tearing out and hauling an existing fence is a line item, not a freebie; it adds to both labor and disposal.
A written estimate lists the run length, height, gauge, coating, gate count and hardware, post-set depth, and whether removal and haul-off are included. What it usually doesn’t cover: repairs to a property-line dispute, moving utilities, or landscaping put back after the dig. Ask before you sign, and get it line by line. We don’t do change-order surprises; the number we write is the number you pay. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Richardson Homes Do to a Chain Link Job
Richardson is Telecom Corridor country, and its core went up almost entirely between the late 1950s and early 1980s, so most of the fence work here sits around small mid-century ranch homes on tight residential lots. In ZIPs 75080 and 75081 in particular, the original homes share remarkably uniform lot sizes and setbacks, which means we can often predict where the side-yard pinch points and buried irrigation lines will be before we dig. The black gumbo clay under these slab foundations swells hard in the wet season and shrinks through summer drought, so post holes have to reach below the active soil or the fence walks out of plumb within a couple of years. We’ve pulled more than one leaning chain link run out of the ground in these older yards for exactly that reason. Hail season also punishes thin mesh, and it’s one of the reasons we lean toward thicker gauge here than we would in a calmer market. We cover the whole of Richardson and the ZIPs around it; walk the wider project scope and you’ll see how a fence fits alongside the rest of our Fence Installation work.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Richardson

Most residential chain link fences in Richardson finish in one to two working days, with posts set and cured before the mesh goes on. Long runs, rough terrain, or several gates can stretch it a day longer. Call (844) 560-4467 for a timeline on your specific property line.
Residential fence permits in Richardson depend on height and location, and the town’s rules have details about where a fence can sit on the lot that are worth checking before you build. We confirm the current requirements for your address and handle the paperwork where a permit is needed, so you aren’t guessing. Call for a free estimate and we’ll sort out what your line requires.
In the great majority of Richardson yards, yes; a chain link fence is a shallow-post system, and we call in the utility locate before digging so nothing gets hit. Deep line work or a buried service crossing the line is the rare exception, and we flag it before we start. Call for a free on-site estimate and we’ll mark it out together.
Chain link fencing in Richardson typically runs $3500 – $9000 for a residential yard, with the high end being long perimeters, six-foot mesh, vinyl coating, and gates. Call (844) 560-4467 for an exact written quote; the estimate is free.
The install carries our 730-Day Done Right Promise: if the fence isn’t right, we make it right. That covers the workmanship on posts, tensioning, and gates for two full years, and the trained crew behind it is background-checked and arrives in uniform. Call for the details in writing.
Get a Free Chain Link Fence Estimate in Richardson
If you’re fencing a yard in Richardson, the next step is a free on-site estimate. We walk the line with you, mark the corners, talk through height, gauge, coating, and gates, and hand you a written, line-item price with no surprises. Call (844) 560-4467; a live person answers around the clock. Every job is backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












