







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Plano, TX: What It Costs and How the Job Runs
A chain link fence in Plano, TX typically runs $3,500 – $9,000 for a standard residential yard, and most jobs wrap up in one to three days once materials are on site. The number swings on linear footage, height, gate count, and whether we’re tearing out an old fence first. Call (844) 560-4467 for a free on-site estimate with a written, line-item price.
How a Chain Link Fence Goes In: The Real Sequence

Chain link isn’t complicated, but the order of operations is what separates a fence that stays taut for 20 years from one that sags by the second summer. Here’s what actually happens on a Plano job.
Stage 1: Layout and utility marking (day 1, first 2 – 4 hours)
We walk the property line with you and mark post spacing, corners, and gate locations. Before any digging, we call in the Texas 811 utility locate so nobody hits a sprinkler main, gas line, or fiber run. On Plano lots with mature irrigation systems, this step catches problems early. You decide the exact fence line and gate swing direction here.
Stage 2: Demo of the old fence (day 1, 2 – 6 hours)
If there’s an existing fence, we pull it, cut posts at grade or dig them out depending on what the new layout requires, and haul everything off. Concrete footings for old posts get broken out so new posts sit in clean soil. You decide whether to keep any reusable sections or gates.
Stage 3: Post setting (day 1 into day 2)
We dig post holes to depth, set line posts and terminal posts (corner, end, and gate posts get larger-diameter pipe and more concrete), and pour footings. Concrete needs to cure before the fabric goes up, so this is where a job crosses from day 1 to day 2. You decide post spacing if you want a heavier rail configuration.
Stage 4: Rails, fabric, and tensioning (day 2 – 3)
Top rail, tension bands, and the chain link fabric itself get installed and pulled tight with a stretcher bar. Gates get hung, latched, and tested for swing and clearance. This is the stage where a good installer’s experience shows; sloppy tensioning is the number-one reason fences look tired after a few years.
Stage 5: Walkthrough and cleanup (final 1 – 2 hours)
We walk the fence with you, check every gate, verify post plumb, and clean up the site. Any punch items get handled before we call the job done. Everything we install is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link has more variation than most homeowners expect. Here’s what actually moves the look, the durability, and the price.
- Gauge of wire. Standard residential fabric is 11.5-gauge; 9-gauge is heavier and lasts longer but costs more. For a backyard, 11.5-gauge is usually fine; for a dog run or high-traffic line, go heavier.
- Post and rail weight. Lighter 1-5/8″ line posts save money; upgrading terminal posts and top rail to heavier wall thickness prevents sag over long runs.
- Height. 4-foot, 5-foot, and 6-foot are the common residential heights. Six-foot adds cost for taller posts and more fabric but is the right call if privacy or containment matters.
- Coating and color. Galvanized steel is the standard and the most economical. Vinyl-coated chain link (black or green) costs more but looks cleaner against landscaping and blends into a yard far better than bare metal.
- Gate type. Walk gates, double drive gates, and self-closing hinges are all options. Gate hardware is where budget fences fail first, so don’t skimp here.
- Privacy options. Slats or privacy tape woven through the chain link add cost but block sightlines without switching materials.
Where a fence adjoins a paver walkway or driveway apron, we can tie the finished edge into Belgard or Tremron hardscape so the transition looks intentional rather than bolted on.
What a Chain Link Fence Costs in Plano, TX

Most Plano chain link fence jobs land between $3,500 and $9,000. Here’s what pushes a job toward the low or high end.
| Factor | Typical Range |
|---|---|
| Standard residential yard, 4-ft galvanized | $3,500 – $5,500 |
| 6-ft height with heavier posts | $5,000 – $7,500 |
| Vinyl-coated (black/green) upgrade | $500 – $1,500 added |
| Old fence demo and haul-off | $400 – $900 |
| Additional gates | $250 – $600 each |
The main variables:
- Linear footage. The single biggest driver. A quarter-acre lot fences very differently from a half-acre.
- Terrain and soil. Plano’s expansive clay can shift; rocky or uneven ground slows post digging.
- Existing fence removal. Concrete footings and old posts add labor.
- Material grade. Galvanized vs. vinyl-coated, and light vs. heavy gauge.
- Gate count and hardware. Each gate adds material and labor.
Your written estimate lists every line item, so there are no surprise charges mid-job. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Plano Homes Specifically Do to This Job
Plano is a mature, largely built-out first-ring Dallas suburb, which means most chain link work here is replacement on established lots rather than new construction. In the older central and east corridors (ZIPs 75023, 75074, 75075), we’re often pulling out fences that have stood since the 1970s and 1980s, and the post footings are usually set in clay that’s shifted and cracked over decades. Foundation movement is something we watch for; a fence line along a settling foundation can pull gates out of alignment. In the newer west Plano ZIPs (75024, 75093), we’re more often working around landscaping and irrigation installed with the home, so locating utilities before digging matters more. City of Plano permitting and typical HOA architectural review add a step, so on any fence project here it pays to confirm height and setback requirements before we order material. We cover Plano and the neighboring communities routinely.
Serving Plano, TX – Our Local Coverage Area
We serve Plano and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked, Chain Link Fence in Plano

Most residential chain link fence jobs in Plano take one to three days, depending on footage, gate count, and whether we’re removing an old fence. Concrete footing cure time on day 1 is the main reason a job stretches to day 3. Call (844) 560-4467 to schedule a free estimate and we’ll give you a firm timeline.
Fence permits and HOA approval requirements vary by location and fence height, so it’s smart to confirm before ordering. The local pro we connect you with is licensed as their state requires and will walk you through what applies to your property. Call for a free estimate and we’ll sort out the details.
Yes, in most cases. We mark the line, call in the utility locate, and work around existing irrigation and plants wherever possible. If you’re planning a broader yard redo, this often pairs naturally with ADU Site Prep & Utilities in Plano or a full Fence Installation in Plano project.
Most Plano jobs run $3,500 – $9,000, with footage, height, gates, and material grade driving the final number. Call (844) 560-4467 for an exact quote; estimates are free and written line by line.
Yes. Every chain link fence we install is covered by the 730-Day Done Right Promise. If something isn’t right, we make it right. Our Fence Installation service and related work like Door Installation in Plano carry the same guarantee.
Get a Free Chain Link Fence Estimate in Plano
Call (844) 560-4467 for a free on-site estimate on your chain link fence in Plano. A live person answers, any time, any day. We’ll walk the property line with you, confirm height and gate layout, and hand you a written, line-item price with no change-order surprises. Financing at 0% for 18 months is available, and projects over $10,000 qualify for $1,000 off.
Written by the team at Groundwork Construction Co.












