







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Richardson, TX: What It Takes and What It Costs
Door installation in Richardson, TX typically runs from about $650 for a standard interior or utility door swap to $4,500 or more for a reinforced exterior entry with impact-rated glass and a new frame. A single door hangs in one day; a whole-house exterior replacement takes three to four days. Every quote is written line by line before a single hinge is set. Call (844) 560-4467 to schedule your free on-site estimate.
Why a Failing Door Matters Before the Next North Texas Storm

Richardson sits right in the heart of hail and high-wind country, and spring storm systems roll through ZIPs 75080, 75081, and 75082 with straight-line gusts that find every weak point on a house. An entry door that has swollen from humidity, pulled loose at a hinge, or still carries the builder-grade slab from 1968 is the first thing to fail. Once the seal breaks, wind-driven rain gets behind the frame, the sill rots, and the whole opening becomes a repair instead of a replacement.
The work we do here isn’t decorative. It’s about wind-rated door assemblies, proper anchoring into the rough opening, and hardware that keeps the door seated under load. That’s the difference between a door that rides out a storm and one you’re boarding up after it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How We Handle Door Installation in Richardson, Start to Finish
Every door job follows the same five stages. Here’s what actually happens, and when you’ll be asked to decide something.
Stage 1: On-site measurement and opening inspection (day 1, about 90 minutes)
We measure the rough opening, check the frame for plumb and square, and look at what’s behind the trim. On Richardson’s 1950s-1980s ranch homes, this is where we find the surprises: out-of-square openings that have shifted with the clay soil, or original framing that needs sistering before a new door will sit right. You’ll get a written scope at the end of this visit.
Stage 2: Door selection and final spec (days 1-3)
This is your decision point. You choose the material (steel, fiberglass, or wood), the glass package, the finish, and whether we’re reinforcing the frame. Lead time on a stock door is a few days; a custom-sized or special-order impact door can run two to four weeks. We tell you the lead time in writing before you commit.
Stage 3: Demo and prep (day of install, 1-2 hours)
The old door and trim come out, the opening gets cleaned and inspected, and we address any rot or framing issues found underneath. On the oldest Richardson pockets, this is where we sometimes discover aluminum wiring or asbestos-era materials around the opening, and we handle that before the new door goes in.
Stage 4: Setting and sealing (day of install, 2-4 hours)
The new door and frame are set, shimmed, anchored, and checked for square. We flash and seal the exterior side against water intrusion, then hang the hardware. A second person stays on alignment through the whole set so the door swings true on the first try.
Stage 5: Final check and walkthrough (same day, about 30 minutes)
We test the latch, the lock, the weatherstripping, and the threshold seal, then walk the job with you. If the job needs a permit, we schedule the inspection and stay on it until it passes.
The Options You’ll Choose Between for Your Door Installation
A door is three decisions stacked on top of each other. Here’s what each one costs you in performance and money.
- Steel entry doors – The most common exterior choice. Strong, budget-friendly, and holds paint well. The trade-off is dents from hail and impact, and the factory finish can chip at the edges over years of Texas sun. Works well for a side or garage entry.
- Fiberglass entry doors – Won’t dent, won’t rust, and stands up to the heat better than steel. Mimics wood grain convincingly. Costs more up front and needs repainting less often, which is usually the right long-term trade for a front entry facing west.
- Wood doors – The premium look. Beautiful, but requires real maintenance in North Texas. We only recommend wood for covered entries or where the homeowner is prepared to refinish every few years.
- Impact-rated glass and hardware – The wind-load reinforcement piece. Laminated glass in a tested frame assembly is what turns a door into wind-rated protection. You’ll see the difference in the quote, and it’s the line item that matters most in storm country.
- Interior doors – Hollow-core for closets and budget, solid-core for bedrooms and bathrooms. Solid-core costs more and cuts sound transfer, which owners in tighter ranch floor plans tend to notice.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation Costs in Richardson, TX
A standard interior door swap lands around $350-$900 installed. A basic exterior entry door runs $900-$2,400. A reinforced, impact-rated exterior entry with a new frame and hardware comes in at $2,400-$4,500. A full-house door replacement across six to eight openings typically falls somewhere in the $5,000-$12,000 range depending on specs.
Five things push a job toward the high end:
- Size and configuration – A standard 36-inch slab is the cheapest order. Oversized, sidelit, or double doors jump the price.
- Condition of the existing opening – Rot, out-of-square framing, or old aluminum wiring found during demo means added labor before the door goes in.
- Material grade and glass – Impact-rated laminated glass and premium hardware add cost but pay back in storm performance.
- Frame replacement vs. slab swap – Replacing just the door is cheaper. Replacing the whole frame assembly is the right call when the old frame has shifted or rotted.
- Permit scope – A single door often needs no permit; structural changes to the opening or impact-rated installations that touch framing may require one.
Every written estimate covers the door, hardware, labor, sealing, and permit coordination where required. It doesn’t cover unforeseen rot or framing repairs discovered at demo; we flag those with a fixed price before doing the work, never a surprise invoice. That’s the upfront pricing we hold to on every job.
What Richardson Homes Do to a Door Installation

Richardson’s post-war ranch housing stock was built mostly between the late 1950s and early 1980s, and the builders in ZIPs 75080 and 75081 worked from nearly identical floor plans tied to the aerospace and telecom employment boom. That uniformity helps us work fast, but it also means we see the same door failures across the city: original hollow-core interior slabs that have swollen and stuck with the years, builder-grade exterior doors that no longer meet the frame after sixty years of clay-soil settling, and hardware that was never designed for the thermal swings this climate throws at it.
The black gumbo clay under Richardson’s slab foundations swells and shrinks hard between drought and wet season. That movement shows up in the door opening as sticking, dragging latches, and gaps at the top corner. When we’re called out for door installation in Richardson, checking the head and jambs for square is the first move. If the opening has shifted, the door needs a properly anchored frame, not just a new slab. And because North Texas hail and spring gusts are a given, exterior doors here should carry wind-rated hardware and impact-rated glass as a baseline, not an upgrade. Homeowners going wider than a single door swap often pair this with Windows & Doors in Richardson to keep the whole envelope sealed as one scope.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Richardson
A single door takes one day from demo to final walkthrough; a whole-house exterior replacement takes three to four days, plus lead time on the doors themselves. Custom-sized or impact-rated doors can run two to four weeks out from order. Call (844) 560-4467 for a timeline tied to your actual project.
A straight slab replacement usually needs no permit. A replacement that touches structural framing or changes the opening size does. Because Richardson code can shift on window and door replacements tied to wind ratings, we check the requirement against your specific scope before work starts and pull what’s required. Call for a free estimate and we’ll walk you through what your job needs.
Yes, in most cases a new slab can be hung in the existing frame in a few hours. That’s the lower-cost route. The catch is that if the frame has shifted or rotted, a slab-only job will fail again within a year or two on this soil. We tell you honestly which path makes sense for your opening.
Interior doors run about $350-$900 installed, basic exterior entries $900-$2,400, and reinforced impact-rated entries $2,400-$4,500. A full-house replacement typically lands in the $5,000-$12,000 range. Call (844) 560-4467 for an exact quote, backed by our 730-Day Done Right Promise.
Every door job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers labor and installation for two full years, and it’s written into your contract. Call (844) 560-4467 to schedule a free estimate and see the coverage in writing.
Get a Free Door Installation Estimate in Richardson

If a door is sticking, swelling, or letting in storm-driven water, get it in front of someone who can tell you whether it’s a slab swap or a frame job. We’ll come out, measure the opening, and leave you with a written line-item estimate at no cost. We’re proud to serve homeowners across Richardson and the surrounding area, and we handle our Windows & Doors work with the same upfront pricing on every job. Call (844) 560-4467 for your free estimate. A live person answers, day or night, and we’ll get you scheduled.
Written by the team at Groundwork Construction Co.












