







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in The Colony, TX: What It Costs and How Long It Takes
A chain link fence in The Colony typically runs $3,500 – $9,000 for a standard residential lot, and most jobs are finished in two to four days once we’re on site. That covers posts set in concrete, tension wire, top rail, fabric, and gates. The number that lands on your quote depends mostly on linear footage, height, gauge, and how many gates you want. Call (844) 560-4467 for a free on-site estimate and we’ll measure it with you.
How a Chain Link Fence Job Actually Goes, Start to Finish

Fencing is a short job with a clear sequence, and knowing where your decisions land makes the whole thing easier. Here’s the real order of operations on a typical The Colony lot.
Stage 1: On-site measure and utility locate (day 1, about an hour)
We walk the property line with you, confirm the corners, and mark where gates belong. Before anything gets dug, the private utility locate gets called in and we confirm you’ve flagged irrigation lines and any buried low-voltage lighting. This is the stage where you lock in the footage and gate positions. Moving a line here costs nothing. Moving it after the concrete sets costs everything.
Stage 2: Demolition and haul-off, if there’s an old fence (half a day)
Old chain link comes down quickly. Rusted posts that are set in concrete get pulled whole and the footings excavated. If you’ve got a leaning wood fence along the same line, that removal gets scoped separately so the quote stays honest about what’s actually being torn out. Haul-off and disposal are priced in.
Stage 3: Setting posts (day 1 – 2)
Holes get dug by hand or with a towable auger depending on access, set to depth, and filled with concrete that cures overnight before the fabric goes on. Post spacing lands at roughly 8 to 10 feet on straight runs. Corner and terminal posts get the heavier footings because they carry the tension. This is the slow part of the job and the part that determines whether the fence stays straight for the next twenty years.
Stage 4: Rails, fabric, and tension (day 2 – 3)
Top rail goes in first, then the fabric gets stretched from a terminal post with a come-along and tension bar. Tension wire at the bottom keeps dogs from pushing under. This is where a cheap install shows itself, because loose fabric sags within a season. We check the whole run by hand before we call it done.
Stage 5: Gates, walkthrough, cleanup (day 3 – 4)
Gate frames get hung, latches aligned, and self-closing hinges tested if you asked for them. We walk the entire line with you, hand over the warranty in writing, and haul off every scrap of fabric and concrete. Most jobs wrap in a single site visit or two, and you’ll know the schedule before we start. If the fence is part of a full Fence Installation in The Colony project with multiple fence types on the same lot, the sequence gets coordinated so everything is measured against one layout.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Be Choosing Between
Chain link isn’t one product. These are the decisions that actually show up on your quote:
- Height: 4 ft vs. 5 ft vs. 6 ft. Four feet is the standard for marking a property line. Five feet is the sweet spot for keeping dogs in without making the yard feel caged. Six feet is what most people pick for security, and it’s also the height HOAs are most likely to have opinions about. Each jump in height adds cost on posts, fabric, and footings.
- Gauge of fabric. 11.5-gauge is the light residential grade and the cheapest per foot. 9-gauge is noticeably heavier and resists bending and dog-chewing far better. On a lake-adjacent lot with wind exposure, the heavier fabric is worth the upcharge.
- Galvanized vs. vinyl-coated. Plain galvanized is the budget choice and holds up fine in North Texas. Vinyl-coated (usually black or green) costs more but looks less industrial, hides the rust bloom that eventually shows at welds, and blends into landscaping.
- Gates: walk vs. drive, and how many. A single walk gate is standard. A double drive gate at the side yard runs more because of the frame, hinges, and heavier posts on either side. Self-closing and self-latching hardware is a small add and a real convenience.
- Top rail and tension wire. Top rail is basically standard. Bottom tension wire isn’t, and skipping it is the single most common reason a chain link fence sags at the base.
- Privacy options. Slats woven into the fabric or a screen of hedge behind it turn a chain link run into something the neighbor won’t complain about. Neither changes the fence itself, so both can be added later.
If pavers or a hardscape edge are going along the same property line, this is a natural point to coordinate the layout. Belgard and Tremron edging products hold up well against the grade changes we see on sloped lots, and pairing the fence line with a paver border keeps the whole run looking deliberate.
What Chain Link Fence Costs in The Colony, TX

Residential chain link in The Colony lands between $3,500 and $9,000, with most standard lots sitting near the middle. Here’s what pushes a job toward one end or the other.
| Line item | Typical range |
|---|---|
| Standard residential run, 4 – 5 ft, galvanized | $3,500 – $6,000 |
| 6 ft security height, heavier gauge | $5,000 – $9,000 |
| Single walk gate, installed | $250 – $600 |
| Double drive gate, installed | $700 – $1,800 |
| Removal and haul-off of existing fence | $400 – $1,200 |
The five variables that move the number:
- Linear footage. The primary driver. A typical The Colony subdivision lot runs a few hundred feet of fence line once you account for the sides and back.
- Existing fence condition. Nothing to remove is cheapest. A rusted-out fence with concrete footings to excavate adds labor and disposal.
- Grade and access. Sloped yards and tight side-yard access slow the work down and can rule out equipment, which means more hand digging.
- Material grade. Gauge, coating, and gate hardware swing the price meaningfully on the same footage.
- Permit scope. Whether the city requires a permit for your height and location affects both cost and timeline.
A written estimate from us includes posts, concrete, fabric, top rail, tension wire, gates, hardware, haul-off, and cleanup. What it doesn’t include unless it’s called out separately: utility locate fees if a private locate is needed, removing landscaping in the fence line, and any concrete mow strip or curb at the base. The pricing is upfront, so the number you see is the number you pay. No change orders for the small stuff.
See the difference
Before
After
Before
After
Before
AfterWhat The Colony Homes Specifically Do to This Job
The Colony is a fully built-out, landlocked city on the south shore of Lewisville Lake, which shapes fencing work in a way it doesn’t in the fast-growing towns to the north. There’s essentially no new ground to build on here. Almost every fence job is a replacement on a lot that’s been developed for decades, which means we’re pulling out old posts, working around established landscaping, and dealing with property lines that have probably shifted in the owner’s mind over the years.
The housing stock tells the story: mostly 1970s through 1990s single-family subdivisions, brick-veneer ranches and traditional two-story homes, with the core largely built by the 1980s. Those yards have mature trees, established sprinkler systems, and fence lines that have already been replaced once. In subdivisions near the lake, we regularly see galvanized posts that have rusted through at the ground line from years of clay soil holding moisture against the steel, and wind-twisted top rails from spring storms rolling across open water.
Because the city is essentially done growing, fencing here is renovation work, not new construction, and it competes for attention with the roof, windows, and foundation jobs on the same aging homes. That’s why the details matter: determining the true property line before we dig, locating irrigation before augering, and getting the footing depth right in expansive clay. If you’re tackling several exterior projects at once, homeowners often pair this with Door Installation in The Colony to button up the house at the same time. Our Fence Installation service covers the wider range of styles if you’re weighing options. We work throughout The Colony and the surrounding area.
Serving The Colony, TX – Our Local Coverage Area
We serve The Colony and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in The Colony

Most residential chain link fence jobs in The Colony finish in two to four working days, with the concrete footings curing overnight between setting posts and stretching fabric. Smaller yards with simple access can wrap in a single visit. Weather and utility locates are the usual causes of a delay. Call (844) 560-4467 and we’ll give you a real schedule for your lot.
It depends on height. Many Texas cities set a threshold around six feet in the rear yard and lower in the front, but The Colony’s exact limits and whether a permit is required for your height and setbacks are worth confirming with the city before we start. We’ll tell you what we find on your lot and won’t start digging until you’re clear. Call (844) 560-4467 with the height you want and we’ll walk through the next step.
Yes, in most cases we route the line to preserve mature trees and beds, though some root or sod disturbance right along the fence path is unavoidable where posts get dug.
Expect $3,500 – $9,000 for a standard residential run in The Colony, with 6-foot security height and heavier gauge pushing toward the top of that range. Gates, removal of the old fence, and difficult access or grade add on top. Call (844) 560-4467 for an exact quote – estimates are free.
Yes. Every chain link fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s stated in writing before we start. Calls are answered by a live person 24 hours a day, and our technicians are background-checked and arrive in uniform.
Get a Free Chain Link Fence Estimate in The Colony
If a chain link fence is on your list this year, start with a free on-site estimate. We’ll measure the property line, talk through height and gauge, and hand you a written quote the same day with the price you’ll actually pay. Call (844) 560-4467 to schedule yours. A live person answers around the clock. If your project also includes bigger structures, we can talk through ADU Site Prep & Utilities in The Colony while we’re there.
Written by the team at Groundwork Construction Co.












