







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Richardson, TX: What to Expect
Paver driveways in Richardson typically run $7,000 – $18,000, and most installs take three to five working days from demo to final sweep. The job is a full excavation and rebuild, not a resurfacing: we pull out the old slab or gravel, compact a fresh base, then set interlocking pavers on a sand bed. Call (844) 560-4467 and we’ll walk your driveway, check your base and drainage, and put a line-item number in front of you.
How we build a paver driveway here, stage by stage

Every paver driveway we install in Richardson moves through the same five stages. We give you the schedule in writing before we start so you know which day the crew is where.
Stage 1 – Measure and layout (day 1, about half a day). We mark the finished grade, width, and any flares or aprons. You decide the paver pattern and edge restraint here, because re-cutting a layout after excavation is expensive. If your driveway ties into a widened approach, we confirm the width now.
Stage 2 – Demo and haul-off (day 1 – 2). We break out the existing concrete, asphalt, or gravel and load it out. Most Richardson lots have a few inches of topsoil over clay, so this is where we see what the base actually needs. Expect one full day for a standard two-car drive.
Stage 3 – Excavate, grade, and compact the base (day 2 – 3). This is the stage that decides whether the driveway lasts. We dig to depth, bring in crushed aggregate in lifts, and compact each lift. On Richardson’s clay, the base is the whole game. You’ll see us check slope and drainage away from the house and garage here.
Stage 4 – Set the pavers (day 3 – 4). We lay the sand bed, set the pavers in the agreed pattern, and cut the edges snug against the restraint. Cutting happens on site. This is the day your neighbors ask what’s going in.
Stage 5 – Edge, joint sand, and clean-up (day 4 – 5). We install the edge restraint, sweep polymeric or washed joint sand into the joints, compact the finished field, and clean the site. You get a walk-through and the start date on your 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The paver options you’ll actually choose between
The material and pattern you pick changes both the look and the number. Here’s what matters, with the honest trade-offs.
- Interlocking concrete pavers (the standard choice): Strong, accepts a range of colors, and the least expensive paver option. Good for Texas heat and freeze-thaw swings when set on a properly compacted base.
- Clay brick pavers: Warmer, classic look that pairs well with Richardson’s brick-veneer ranch homes. Higher material cost and a little more install labor.
- Permeable pavers: Designed with open joints so water passes into the base. Worth considering where a driveway slopes toward the house or your lot holds water after storms.
- Pattern: Running bond and herringbone are the two you’ll see most. Herringbone adds interlock strength at the cost of more cuts and labor.
- Color and finish: Straight color versus blended or tumbled looks. A blended mix hides scuffs and tire marks better over the years.
- Edge restraint: Concrete or steel edge is what keeps the pavers from creeping. Not the place to cut corners.
What paver driveways cost in Richardson, TX

Plan on $7,000 – $18,000 for a paver driveway in Richardson, depending on square footage, demolition, and the paver you choose. A straightforward two-car driveway at the low end of that range runs near the floor; a wider drive, sloped lot, or premium brick puts you near the ceiling.
Here’s what moves the number:
| Factor | What pushes cost up |
|---|---|
| Square footage | More drive, more material and base |
| Existing surface | Thick old concrete adds demo and haul-off |
| Base condition | Ample clay or soft spots mean more excavation and aggregate |
| Paver material | Clay brick or permeable systems run above standard concrete pavers |
| Pattern and layout | Herringbone, curves, and flares add cuts and labor |
Your written estimate lists demo, haul-off, excavation, base material, pavers, edge restraint, joint sand, and clean-up as line items. What’s commonly outside the number: removing a fence or gate to get equipment in, drainage corrections, and any work where the driveway ties into a full Driveway & Pavers in Richardson project.
See the difference
Before
After
Before
After
Before
AfterWhat Richardson homes specifically do to this job
Richardson is Telecom Corridor country, and most of its housing went up between the late 1950s and early 1980s. That matters for a paver driveway. The black gumbo clay under these slab foundations swells and shrinks hard between wet and dry seasons, so we treat the base and drainage as the make-or-break part of the build, not an afterthought. Spring hailstorms and long hot summers also stress the surface, which is why base compaction and a snug edge restraint matter more than a fancy color.
In ZIPs 75080 and 75081 in particular, homes from the original aerospace and telecom booms share remarkably uniform footprints, so our crews know the common ranch layout and can plan excavator access and staging fast. If your driveway feeds a detached workshop or a wide side apron, we account for the extra turning room up front. A paver drive also pairs naturally with a fresh entry, and homeowners sometimes add Door Installation in Richardson while the front of the house is torn up anyway. We cover all three ZIPs (75082, 75081, 75080) across Richardson.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – paver driveways in Richardson

Most installs take three to five working days. A small single-car drive can wrap faster; a wider drive with curves, a steep slope, or heavy old concrete takes longer. Weather, especially a wet week, can add a day.
It depends on whether the work touches the public right-of-way or changes the driveway apron and approach. Standard replacements on your own property may not need a permit, but widening or re-routing an approach usually does. We confirm the requirement for your address before we schedule, and we pull what’s needed. Call (844) 560-4467 for an exact quote.
Yes, in most cases. A driveway replacement stays outside the building envelope, so plumbing and structure inside the home aren’t touched. The exceptions are when you want new drainage tied into yard grading or a widened approach that affects a utility line. We flag those during the walk-through.
Expect $7,000 – $18,000, with the final figure set by square footage, demolition, base condition, and paver material. Call (844) 560-4467 for an exact quote – estimates are free.
Every paver driveway is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship on the base, setting, and edge, backed in writing.
Get a paver driveway estimate in Richardson
Call (844) 560-4467 to book a free on-site estimate for paver driveways in Richardson. We walk the driveway with you, measure the square footage, check your base and drainage, and hand you a written line-item quote with the schedule. It’s part of our Driveway & Pavers service, and if you’re also refreshing the front of the house, we can talk through Cabinets & Countertops in Richardson while we’re there.
Written by the team at Groundwork Construction Co.












