







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Highland Park: What to Expect Before, During, and After the Build
Paver driveways in Highland Park, TX typically run $7,000 – $18,000 and take 3 to 7 working days on most lots, including demo, base prep, and poly sand finishing. The driveway itself is the easy part. The hard part is what happens before a truck ever rolls in: surviving Highland Park’s design review, tree-protection rules, and the town’s own separate inspection department. Call (844) 560-4467 for a free on-site estimate and we’ll walk your lot with you.
How Paver Driveways Get Built Here, Stage by Stage

Every paver driveway job we run in Highland Park follows the same five-stage sequence. The stages don’t change. The time each one takes does, and that’s usually dictated by Highland Park’s review process, not by us.
Stage 1: Site walk and layout (1 – 2 days)
We measure the drive, check the drop from the street apron to the garage slab, and trace the drainage path. On Highland Park’s black-clay soil, water is the biggest problem: if the drive slopes toward the garage, the pavers aren’t the fix, the grading is. You decide the paver pattern and edge treatment at this stage so nothing gets re-ordered later.
Stage 2: Design review and tree protection (1 – 4 weeks)
Most drive re-do’s in Highland Park need town approval before we demo anything, and protected mature trees on the lot lines add a root-zone protection plan to the file. This is the single longest stretch on the schedule, and the one where a pre-built drawing saves weeks. We supply the plan drawings and specs for the submittal; you sign off on the final layout.
Stage 3: Demo and haul-off (1 – 2 days)
Existing concrete or asphalt comes out, including the old base. We haul it off the same day, which matters on tight Highland Park lots where a single-wide street can’t park a dumpster and a crew at once. You’ll want your cars out of the drive for the whole build, not just this stage.
Stage 4: Base prep and compaction (2 – 3 days)
We excavate 6 to 8 inches, lay geotextile fabric to stop the clay from pumping up into the base, bring in 4 to 6 inches of crushed stone, and compact in lifts. The base is 80% of the driveway. It’s also the stage where we confirm the garage-side slope and any apron transitions match the town’s right-of-way expectations.
Stage 5: Paver set, cuts, and finish (2 – 3 days)
Pavers go down in the agreed pattern, we cut the edge stones in place, set the restraining edge, and run polymeric sand into the joints. You do a final walkthrough before sand and sealer, then we close out. Inspections and the final sign-off get scheduled within this window when required. Call (844) 560-4467 to get your free estimate on the calendar.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Paver Driveway Options You’ll Actually Choose Between
The driveway isn’t a list of features. It’s a short list of decisions where every choice trades cost against maintenance. Here are the ones that come up most on Highland Park projects:
- Clay pavers (Belgard or Tremron brick, 2 3/8-inch thick): The most traditional look and the one that holds up best to Texas sun because the color goes all the way through, not just on the surface. Higher material cost, usually the top of the range.
- Concrete pavers (Unilock or Belgard, 2 3/8-inch): The workhorse. More color and laying-pattern options than clay, similar base requirement, about a step below clay on the price scale. Best fit for a curb appeal refresh on a house with mature trees where budget needs to stay in the middle.
- Belgard and Unilock large-format slabs (24 by 24 inch or larger): Modern look, fewer joints, faster install. Heavier, more likely to need a mechanical setter, and any settlement shows more because the units are bigger. Premium price.
- Techo-Bloc textured and tumbled finishes: Grippier surface, hides tire marks and tree debris better than smooth or polished finishes. Slightly more cost than standard finishes, worth it under Highland Park’s live oaks.
- Permeable pavers: The answer when drainage is the problem. Joints open into a stone reservoir that lets water soak into the ground rather than sheet across the drive or pool at the garage. Higher cost, and only worth it when the lot needs it.
If you’re pairing the drive with other exterior work, this is often the point where homeowners tell us they want Door Installation in Highland Park or a wider paver plan, and we scope it all together in one estimate.
What Paver Driveways Cost in Highland Park, TX

Paver driveways in Highland Park, TX run $7,000 – $18,000 for a typical residential drive.
Five things push a job to the low or high end:
- Square footage: A one-car drive sits near $7,000. A three-car drive with a turnaround runs to $18,000 or more.
- Paver material. Concrete pavers land in the middle of the range. Clay brick and large-format slabs push the number up.
- Base conditions. Black-clay lots in Highland Park that need reconstruction under the drive are more than a re-lay on a sound base. This is the biggest cost driver.
- Drainage. A standard slope is included. A catch basin, drainage channel, or permeable system to solve a real water problem adds cost.
- Permits and tree protection. Design review, arborist reports, and tree-root plans add money and weeks.
What’s included in a written estimate: demo and haul-off, base excavation and compaction, geotextile fabric, paver set and cutting, restraining edge, polymeric sand, and cleanup.
What typically isn’t: mainline repairs, moving utility meters, driveway-height garage door adjustments, and any landscaping disturbed by the work. The written estimate is fixed. The number you see is the number you pay. Call (844) 560-4467 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Highland Park Homes Do to a Paver Driveway
Highland Park is nearly built out, and almost every house here dates to the 1910s – 1930s. That means every drive project is a renovation on an established house, not a new build. The garages were sized for cars a third of today’s width. Many have a single-car opening that has to be retooled before a wider drive makes sense, and nearly every house uses pier-and-beam construction, so the drive meets the garage at a grade that’s been patched or raised more than once.
The team that matters here is Highland Park’s own building inspection department, separate from Dallas. A drive project west of the tollway under the live oaks on Beverly, Lawther, or Lakeside needs a tree-root plan and design-review sign-off pulled under the town’s own rules, not Dallas’s. That review can stall a job for weeks if the paperwork is wrong. That review window is why we start every Highland Park paver driveway with the plan drawings already in hand. Call (844) 560-4467 and we’ll walk the lot before you commit a dollar.
Serving Highland Park, TX – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Highland Park

A typical paver driveway in Highland Park takes 3 to 7 working days on site, not counting the 1 to 4 weeks of design review and tree protection approval before work starts. If the existing base is sound and drainage is straightforward, expect the fast end. Call (844) 560-4467 and we’ll give you a realistic schedule for your specific lot.
Yes, in most cases. Grading changes, drainage changes, and tree impacts on the drive bring the project through Highland Park’s design review and its own inspection department, separate from Dallas. We supply the drawings and specs for the submittal. Call (844) 560-4467 to talk through what your project will need.
Usually yes, but not always. On original 1910s – 1930s Highland Park garages, a wider drive sometimes requires retooling the garage opening or adjusting the door after the finished grade rises a few inches. We check the clearances during the site walk so nothing surprises you mid-project. Call (844) 560-4467 for a free estimate and we’ll tell you which case yours is.
$7,000 – $18,000 for most residential drives. Concrete pavers land in the middle. Clay brick and large-format slabs push toward the top. Rebuilding the base under Highland Park’s black-clay soil is the largest single cost variable. Call (844) 560-4467 for an exact quote – estimates are free.
The 730-Day Done Right Promise covers our workmanship on every paver driveway we build. If it’s not done right, we make it right, for two full years after the final walkthrough. Manufacturer warranties on the pavers vary by brand and grade. Call (844) 560-4467 to schedule your free on-site estimate.
Get Your Free Paver Driveway Estimate in Highland Park
If you’re thinking about pavers for your Highland Park drive, start with a free on-site estimate. We’ll measure the lot, walk the drainage, check the garage clearances, and give you a written line-item quote with the design review and tree protection work spelled out. Call (844) 560-4467 and a live person picks up, any hour, any day. This is part of a full Driveway & Pavers in Highland Park scope, and we’re happy to talk through the wider exterior at the same time. You can also see our Driveway & Pavers service or find more on our Highland Park page. Homeowners often pair this with Cabinets & Countertops in Highland Park when the garage is being finished at the same time.
Written by the team at Groundwork Construction Co.












